DSPIC33EP512MC204-I/PT - 16-bit DSC 512KB Flash 70 MIPS | Microchip
部品番号: DSPIC33EP512MC204-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.6 | $4.60 |
| 10 | $4.36 | $43.60 |
| 100 | $4.05 | $405.00 |
| 500 | $3.75 | $1,875.00 |
| 1,000 | $3.45 | $3,450.00 |
DSPIC33EP512MC204-I/PT 概要
A digital signal controller combines the control peripherals and ease of use of a microcontroller (MCU) with the math throughput of a digital signal processor (DSP) in a single RISC core. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop real-time control such as field-oriented motor control, digital power conversion, and sensor signal conditioning.
Key features include the dsPIC33E 16-bit DSP engine with DSP instruction support, Motor Control PWM (MCPWM) modules for multi-phase inverter drive, Quadrature Encoder Interface (QEI) inputs for position feedback, on-chip operational amplifiers and comparators that reduce external analog component count, and 4 DMA channels with 5 timers as reported by distributor listings.
The dsPIC33EP MC-series is architected specifically for precision motor control: the high-resolution PWM with dead-time insertion, fast 12-bit ADC sampling tied to PWM triggers, and hardware QEI enable sensorless and sensored FOC implementations at switching frequencies in the tens of kHz. The DSP engine performs MAC operations in a single cycle, sustaining the 70 MIPS peak throughput needed for real-time control loops.
Typical applications include BLDC/PMSM/ACIM motor drives, digital power supplies (LLC, totem-pole PFC), UPS and solar inverter control, and industrial automation nodes. The integrated op amps suit current-shunt amplification in motor phase legs.
Design consideration: this device runs only from a 3.0V-3.6V rail, so level shifting is required for 5V peripheral interfaces; multiple PGECx/PGEDx pairs exist for ICSP debugging - use them as matched pairs.
This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP512MC204-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP512MC204-I/PT （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Core Architecture, Supply Voltage, Packaging.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP256MC504-I/PT
✅ ドロップイン✓ 在庫あり
$4.6 / 個
データシートを見る →DSPIC33EP512GP504T-E/PT
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →DSPIC33EP32GP504T-I/PT
✅ ドロップイン✓ 在庫あり
$2.15 / 個
データシートを見る →DSPIC33EP512MC204-I/PT 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC33E RISC with DSP engine |
| Max CPU Speed | 60 MHz (70 MIPS) |
| Program Memory (Flash) | 512 KB |
| RAM | 48 KB |
| 電源電圧 | 3.0 V to 3.6 V |
| パッケージ | 44-pin TQFP (10x10 mm) |
| 動作温度 | -40C to +85C (I grade) |
| Motor Control PWM (MCPWM) | Yes |
| Quadrature Encoder Interface (QEI) | Yes |
| On-chip Op Amps | Yes |
| On-chip Comparators | Yes |
| DMA Channels | 4 |
| Timers | 5 |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| Programming/Debug Interface | ICSP via PGECx/PGEDx pairs (MPLAB SNAP/ICD3/REAL ICE) |
DSPIC33EP512MC204-I/PT 44-pin tqfp (10x10 mm) ピン配置ガイド
DSPIC33EP512MC204-I/PT (44-pin tqfp (10x10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP512MC204-I/PT.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP512MC204-I/PT の用途: 6 件s: BLDC/PMSM Motor Drives, Digital Power Conversion, UPS and Inverter Systems, Industrial Automation and Robotics, Electric Vehicle Auxiliary Systems, Sensor Signal Conditioning and Data Acquisition.
BLDC/PMSM Motor Drives
The DSPIC33EP512MC204-I/PT fits sensorless and sensored field-oriented control (FOC) of PMSM and BLDC motors because its 70 MIPS DSP core executes single-cycle MAC instructions for the Clarke/Park transforms, while the MCPWM module generates complementary three-phase PWM with hardware dead-time insertion. The on-chip op amps amplify low-side shunt currents before the 12-bit ADC, which samples synchronously with PWM triggers to avoid switching noise. In a typical 48V, 20 kHz PWM servo drive, the DSC closes current loops at 20 kHz and velocity loops at 1-2 kHz entirely in firmware. A design trade-off: the 3.0-3.6V I/O rail requires gate-driver selection compatible with 3.3V logic inputs, such as Microchip MCP14A series drivers.
おすすめ
Digital Power Conversion
In digital power supplies such as LLC converters, totem-pole PFC stages, and solar micro-inverters, the MCPWM of the DSPIC33EP512MC204-I/PT provides the precise complementary PWM, phase-shifted outputs, and fast fault shutdown needed for safe power-stage control. The 70 MIPS core sustains control loops at 100-300 kHz sampling rates typical of modern digital power, and the on-chip comparators implement cycle-by-cycle overcurrent limiting in hardware without CPU intervention - a critical safety feature when the loop must react within one switching period. Firmware implements voltage-mode or average-current-mode control with the DSP engine. Note that the 3.0-3.6V supply and -40C to +85C industrial grade mean the isolation and feedback circuitry must level-shift appropriately from the power-stage ground domain.
おすすめ
UPS and Inverter Systems
Single-phase UPS and grid-tie inverter control benefits from the DSPIC33EP512MC204-I/PT's combination of MCPWM (SPWM generation with dead time), fast ADC synchronized to the PWM carrier, and 512 KB Flash that accommodates anti-islanding algorithms, power-quality logging, and communication stacks in one firmware image. The hardware QEI can interface rotary encoders on engine-generator sets, while the DSP engine computes RMS line-voltage and current measurements in real time. The 48 KB RAM buffers waveform captures for grid-fault analysis. Because the part operates from 3.0-3.6V only, designers should power it from a precision 3.3V LDO and use the on-chip brown-out and watchdog features to guarantee safe inverter shutdown during supply transients, per Microchip motor-control reference designs.
おすすめ
Industrial Automation and Robotics
In factory automation nodes, the DSPIC33EP512MC204-I/PT serves as a real-time actuator controller: the QEI reads incremental encoder feedback from servo axes, MCPWM drives stepper or servo power stages, and 512 KB Flash holds motion profiles plus a UART/CAN protocol stack. The four DMA channels offload ADC and UART transfers, freeing the 70 MIPS core for multi-axis coordination math. The -40C to +85C industrial temperature grade suits unconditioned control-cabinet environments. System designers commonly pair it with a host PLC over CAN using MCP2515-class controllers; the DSC handles the deterministic 10-20 kHz servo inner loop while the PLC handles sequencing. A practical tip: use the multiple PGECx/PGEDx pairs to expose an in-board ICSP header for field firmware updates.
おすすめ
Electric Vehicle Auxiliary Systems
Beyond traction, EV subsystems such as electronic water pumps, cooling-fan modules, HVAC blowers, and oil pumps use compact FOC drives where the DSPIC33EP512MC204-I/PT's integration - MCPWM, op amps, comparators, QEI - reduces board area and BOM count in space-constrained housings. The 70 MIPS core runs position-observer-based sensorless algorithms while the on-chip op amps condition phase-current shunts at zero external amplifier cost. The -40C to +85C grade covers under-hood auxiliary ambients. Because qualification often requires AEC-grade parts, verify the automotive variant (DSPIC33EP512MC204-E/PT suffix family) with Microchip before committing to the -I grade in safety-relevant EV applications, and design the 3.3V rail from the vehicle 12V net through a qualified buck regulator with transient suppression.
おすすめ
Sensor Signal Conditioning and Data Acquisition
The on-chip operational amplifiers and 12-bit ADC make the DSPIC33EP512MC204-I/PT a compact signal-conditioning controller for industrial sensors such as pressure bridges, thermocouples (with cold-junction handling), and magnetic encoders. The op amps can be configured as gain stages ahead of the ADC, and the DSP engine applies digital filtering (IIR/FIR) at 70 MIPS, enabling sample rates in the hundreds of kilosamples per second with real-time preprocessing. DMA channels stream converted data to the 48 KB RAM without CPU loading, and UART/SPI results feed a host. One caution: op-amp bandwidth and ADC performance figures are specified in the family datasheet and should be verified against your signal bandwidth before relying on internal amplification for high-precision metrology chains.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP512MC204-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP256MC504-I/PT | DSPIC33EP512GP504T-E/PT | DSPIC33EP32GP504T-I/PT |
|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 512 KB | 256 KB | 512 KB | 32 KB |
| CPU Speed | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS |
| Motor Control PWM (MCPWM) | Yes | Yes | No (GP-series output compare) | No (GP-series output compare) |
| On-chip Op Amps | Yes | Yes | No | No |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Grade | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) |
主な差別化要因
- Full motor-control peripheral set with 512 KB Flash （vs DSPIC33EP512GP504T-E/PT)
- Double the program memory of the low-cost sibling （vs DSPIC33EP256MC504-I/PT)
- Industrial temperature grade on the primary device （vs DSPIC33EP512GP504T-E/PT)
設計ノート
Connect every VDD and VSS pin pair - the dsPIC33E family datasheet requires all power pins to be tied, with a 100 nF ceramic decoupling capacitor at each VDD pin placed within 5 mm of the pin, plus one bulk 4.7-10 uF capacitor per device. The 44-TQFP exposed center area should have a via-stitched ground pad to reduce impedance. ICSP programming requires matching PGECx/PGEDx pairs: route your programming header to one complete pair (e.g., PGEC2+PGED2) and keep traces short; do not mix pins from different pairs, or MPLAB X debugging will fail.
The DSPIC33EP512MC204-I/PT operates only from 3.0V to 3.6V; exceeding 3.6V on VDD is a hard failure risk, so add a local LDO (e.g., MCP1755) or precision buck with soft-start rather than tapping a 5V rail. For motor-control designs, star-ground the analog reference (AVDD/AVSS) separately from PWM gate-driver return currents, and place a ferrite plus 100 nF on AVDD. Estimated current draw is tens of mA at 70 MIPS plus I/O load - size the rail accordingly and verify brown-out reset (BOR) is enabled so the DSC never executes with a marginal supply.
Three frequent issues: (1) using unpaired PGEC/PGED pins for ICSP - always use a matched pair per the datasheet; (2) omitting the ADC-to-PWM trigger synchronization - sample phase currents away from PWM switching edges using the MCPWM trigger, or noise will corrupt FOC feedback; (3) assuming 5V tolerance - this is a 3.3V-only device, so any 5V sensor or bus (e.g., RS-232) needs level shifting. Also confirm the exact peripheral set (MCPWM, op amps) exists on your chosen variant, since GP-series pin-compatible parts lack them.
コンプライアンス情報
Compliance status not stated in the provided verified data; confirm RoHS/REACH/lead-free status on the Microchip product page or distributor environmental datasheets before procurement.
