DSPIC33EP512MC506T-E/MR - 16-bit 60 MIPS DSC 512KB Flash | Microchip
部品番号: DSPIC33EP512MC506T-E/MR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.12 | $14.12 |
| 10 | $12.95 | $129.50 |
| 100 | $11.8 | $1,180.00 |
| 500 | $10.95 | $5,475.00 |
| 1,000 | $10.4 | $10,400.00 |
DSPIC33EP512MC506T-E/MR 概要
A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded hierarchy, the dsPIC33EP family sits above general-purpose 8-bit and 16-bit MCUs and below full DSPs, providing deterministic control-loop execution for motor control, digital power conversion, and sensing applications that require both C-language programmability and hardware DSP throughput.
Key features include the 16-bit dsPIC33EP core with DSP instruction extensions, 512KB of self-programmable FLASH, and a rich peripheral set covering CANbus, I2C, IrDA, LINbus, QEI (quadrature encoder interface), SPI, and UART/USART connectivity per Microchip product documentation. The QEI peripheral is particularly significant: it directly decodes encoder feedback without CPU overhead, making the device well suited to servo and BLDC motor drives.
Technically, the dsPIC33EP architecture pairs the CPU with on-chip peripherals such as timers, DMA channels, and high-speed PWM modules typical of the MC (motor control) subfamily, enabling field-oriented control (FOC) and complementary PWM generation with dead-time insertion. The extended temperature grade (-E) supports -40C to +125C operation, allowing placement near power stages in industrial drives.
Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and solar inverters, and industrial automation nodes requiring CAN or LIN connectivity.
Design consideration: the 64-VQFN 9x9 mm package requires a solid ground plane and careful decoupling on the 3V to 3.6V supply; thermal pads on the MR variant must be well soldered for the extended temperature range.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP512MC506T-E/MR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP512MC506T-E/MR （同一形状・フットプリント） — 相違点: Package, Communication Interfaces, Core, Operating Temperature, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP512MC506T-I/MR
✅ ドロップイン✓ 在庫あり
$4.2 / 個
データシートを見る →DSPIC33EP512MC506T-H/MR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33EP256MC506-E/MR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128MC506-E/MR
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
価格はお問い合わせください
データシートを見る →DSPIC33EP512GM606-E/MR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP512MC506T-E/MR 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC33EP DSC core |
| Maximum CPU Speed | 60 MIPS |
| Program Memory (FLASH) | 512KB (170K x 24) |
| RAM | 24KB |
| 電源電圧 | 3V to 3.6V |
| パッケージ | 64-VQFN (9x9 mm) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +125C (extended, -E grade) |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Timers | 5 |
| DMA Channels | 4 |
| Product Family | dsPIC33EP 33EP (MC motor control subfamily) |
| Packaging | Tape & Reel (T suffix) |
| RoHS ステータス | ROHS3 Compliant |
DSPIC33EP512MC506T-E/MR 64-vqfn (9x9 mm) ピン配置ガイド
DSPIC33EP512MC506T-E/MR (64-vqfn (9x9 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP512MC506T-E/MR.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP512MC506T-E/MR の用途: 6 件s: BLDC / PMSM Motor Control, Digital Power Conversion, Industrial Automation and CAN Networks, Servo Drives and Robotics, Sensor Signal Processing, Automotive and E-mobility Auxiliary Systems.
BLDC / PMSM Motor Control
The DSPIC33EP512MC506T-E/MR is purpose-built for precision motor control: the MC subfamily integrates the quadrature encoder interface (QEI) for direct position feedback and motor-control PWM peripherals for complementary drive with dead-time insertion. The 60 MIPS 16-bit DSP core executes field-oriented control (FOC) current loops at 10-20 kHz with substantial cycle margin, while 512KB FLASH holds FOC firmware, CAN communication stacks, and parameter tables simultaneously. In a servo drive, the QEI decodes encoder pulses in hardware, offloading the CPU for the control algorithm. The -E grade (-40C to +125C) tolerates mounting near power stages where ambient temperatures rise. Trade-off: at large PWM edge rates, careful gate-driver isolation and PCB ground segmentation are needed to keep ADC readings clean.
おすすめ
Digital Power Conversion
In digital power supplies, solar inverters, and PFC stages, the DSPIC33EP512MC506T-E/MR provides the deterministic 60 MIPS throughput needed for high-frequency control loops and the high-speed PWM resolution required for phase-shifted and interleaved topologies. The 16-bit DSP engine with hardware MAC instructions computes PI and predictive control laws in single cycles, while 512KB FLASH supports complex multi-mode firmware including soft-start, fault management, and communication. The extended -40C to +125C operating range allows controller placement inside sealed power enclosures. The 3V to 3.6V supply permits direct interfacing with 3.3V feedback circuitry. Design consideration: ADC sampling must be synchronized to PWM events to avoid switching-noise corruption of current-sense readings.
おすすめ
Industrial Automation and CAN Networks
With integrated CANbus, LINbus, I2C, SPI, and multiple UART/USART ports, the DSPIC33EP512MC506T-E/MR acts as a complete industrial communication node. The on-chip CAN peripheral implements CAN 2.0B messaging in hardware, suitable for CANopen and DeviceNet-style fieldbus nodes in factory automation, while the 4 DMA channels move serial data without CPU intervention. The 512KB FLASH accommodates protocol stacks plus application logic, and the 24KB RAM buffers network telegrams. The extended temperature grade supports DIN-rail and cabinet environments. Combined with the QEI peripheral, the same device can close local motion loops while reporting status over CAN - consolidating what would otherwise require separate controller and communication chips.
おすすめ
Servo Drives and Robotics
Multi-axis robotic joints and servo drives benefit from the DSPIC33EP512MC506T-E/MR combination of QEI encoder input, motor-control PWM, and 60 MIPS DSP throughput. A single DSC can run cascaded position/velocity/current loops for one axis at kilohertz rates while handling trajectory commands over UART or CAN. The 512KB FLASH stores trajectory tables, homing routines, and safety logic; the -E temperature rating covers enclosures adjacent to motors where +85C is routinely exceeded. Hardware QEI counting removes interrupt-latency uncertainty from position measurement, improving loop stability at high speeds. For multi-axis systems, one DSPIC33EP512MC506 per axis with CAN interconnection gives a scalable, deterministic architecture used widely in industrial robotics designs.
おすすめ
Sensor Signal Processing
The DSP engine of the DSPIC33EP512MC506T-E/MR - with hardware multiply-accumulate, barrel shifter, and dual operand fetch - accelerates digital filtering (FIR/IIR), FFT analysis, and RMS computation on sensor data streams. Applications include vibration monitoring, power-quality metering, and ultrasonic sensing, where 60 MIPS sustains real-time filtering at audio and ultrasonic sample rates. The 24KB RAM holds filter delay lines and FFT buffers, while 512KB FLASH keeps calibration tables and communication firmware. I2C and SPI interfaces connect external precision ADCs, and UART links results to host systems. The extended temperature range suits outdoor and cabinet-mounted condition-monitoring equipment operating from -40C to +125C.
おすすめ
Automotive and E-mobility Auxiliary Systems
While the standard -E grade is not AEC-Q100 qualified, the DSPIC33EP512MC506T-E/MR with its -40C to +125C range, on-chip CAN, and LIN connectivity fits non-safety-critical automotive auxiliary applications such as pump and fan controllers, actuator drives, and body-control subnodes in off-road and commercial equipment. The QEI input reads position from throttle, valve, or wiper actuators; motor-control PWM drives brushed or BLDC loads. 512KB FLASH supports future firmware expansion and OTA-style updates via bootloader. Designers targeting full automotive qualification should verify with Microchip whether a Q-variant of the dsPIC33EP512MC506 family is available, and always apply ISO 7637 transient protection on supply and CAN lines.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP512MC506T-E/MR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP512MC506T-I/MR | DSPIC33EP512MC506T-H/MR | DSPIC33EP256MC506-E/MR | DSPIC33EP128MC506-E/MR | DSPIC33EP512GM606-E/MR |
|---|---|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) MR | 64-VQFN (9x9 mm) MR - same | 64-VQFN (MR, 64-terminal PQCC) - same | 64-VQFN (9x9 mm) MR - same | 64-VQFN (9x9 mm) MR - same | 64-VQFN (9x9 mm) MR - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Speed | 16-bit dsPIC33EP, 60 MIPS | 16-bit, 60 MIPS | 16-bit, 60 MIPS | 16-bit, 60 MIPS | 16-bit, 60 MIPS | 16-bit, 60 MIPS |
| FLASH Program Memory | 512KB (170K x 24) | 512KB (170K x 24) | 512KB family (confirm per revision datasheet) | 256KB | 128KB | 512KB |
| Motor-Control Peripherals (QEI, MC PWM) | Yes (MC subfamily) | Yes (MC subfamily) | Yes (MC subfamily) | Yes (MC subfamily) | Yes (MC subfamily) | Partial (GM general-purpose peripherals) |
| Supply Voltage | 3V to 3.6V | 3V to 3.6V | 3V to 3.6V | 3V to 3.6V | 3V to 3.6V | 3V to 3.6V |
主な差別化要因
- Extended -40C to +125C temperature grade in the MR VQFN-64 footprint （vs DSPIC33EP512MC506T-I/MR)
- Maximum 512KB FLASH within the pin-compatible MC506 family （vs DSPIC33EP256MC506-E/MR)
- MC (motor-control) subfamily peripherals （vs DSPIC33EP512GM606-E/MR)
設計ノート
The dsPIC33EP512MC506 requires a 3V to 3.6V supply with core regulation handled internally. Decouple every VDD pin pair with a 100 nF ceramic capacitor placed within 2 mm of the pin, plus at least one bulk 10 uF capacitor per supply domain. On the 64-VQFN (MR) package, all VDD/VSS pairs must be connected - do not float any supply pins even if a peripheral domain is unused. Estimated: at 60 MIPS with peripherals active, typical core current is in the tens-of-mA range; size the 3.3V regulator accordingly with headroom for FLASH programming current.
The 9x9 mm VQFN-64 uses a fine-pitch (0.5 mm) land pattern; use NSMD pads with via-in-pad or dog-bone escape routing on outer layers. Solder the center thermal pad to a stitched ground plane array - for the extended -40C to +125C grade this pad is the primary heat path, so an unsoldered or voided thermal pad will cause junction temperatures to exceed estimates. Place the crystal or external oscillator close to the OSC pins with guard ground, and keep CAN/LIN transceiver routing (e.g., to an MCP2551) away from PWM switch-node traces.
Configuration words (FOSC, FWDT, FPOR, FICD) are stored in FLASH at programming time - mismatched oscillator configuration is the most common cause of a 'dead' board; verify the oscillator selection matches your hardware (EC, XT, or internal FRC with PLL). When substituting DSPIC33EP512MC506T-I/MR for the -E part, remember the +85C ceiling: an enclosure designed around 105C ambient will fail with the industrial part. Also confirm that code size plus bootloader and reserve space fits if dropping from 512KB to 256KB/128KB FLASH family members.
コンプライアンス情報
ROHS3 Compliant per distributor specification data (mcu-supplier.com). No AEC-Q100 qualification stated in provided data - verify with Microchip for automotive use. REACH, halogen-free, and conflict-minerals declarations not found in provided data.
