DSPIC33FJ32MC204-E/ML - 16-bit DSC 40MIPS 32KB Flash | Microchip
部品番号: DSPIC33FJ32MC204-E/ML ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.2 | $6.20 |
| 10 | $5.55 | $55.50 |
| 100 | $4.85 | $485.00 |
| 500 | $4.3 | $2,150.00 |
| 1,000 | $3.85 | $3,850.00 |
DSPIC33FJ32MC204-E/ML 概要
A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy, a DSC sits above a general-purpose MCU for control-loop tasks: it executes fast math (multiply-accumulate, barrel shifting) needed by field-oriented motor control, digital power conversion, and sensor-fusion algorithms while retaining Flash memory, interrupts, and rich on-chip peripherals.
Key features include two PWM generators with independent timebases for complementary or independent PWM outputs, Peripheral Pin Select (PPS) that allows remapping of digital peripherals to arbitrary pins for layout flexibility, and a 16-bit fixed-point DSP engine with a barrel shifter and multiple internal bus architectures. The -E suffix indicates the extended industrial temperature range of -40C to +125C, supporting enclosed motor drives and automotive-adjacent environments.
Architecturally, the dsPIC33FJ32MC204 operates from a single 3.0V to 3.6V supply, uses a CMOS process, and supports low-power modes including Sleep and Idle. On-chip analog peripherals (ADC with simultaneous sampling capability) and communication interfaces (UART, SPI, I2C) reduce external component count. Boundary-scan support aids production test.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, digital power supplies such as PFC and LLC converters, and embedded closed-loop control in industrial automation. The dual independent PWM timebases directly address phase-shifted and interleaved topologies.
For design, plan Flash headroom: 32 KB suits compact control firmware, but projects expecting protocol stacks or graphics should consider pin-compatible family members with larger memory. Use the Microchip MA330017 PIM with an Explorer 16 board for rapid evaluation.
This page synthesizes distributor pricing context, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet.
ドロップイン代替品: DSPIC33FJ32MC204-E/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33FJ32MC204-E/ML （同一形状・フットプリント） — 相違点: Package, Core Architecture, Operating Temperature, I/O Ports, Flash Program Memory.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP64MC204-E/ML
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC33FJ32MC204-I/ML
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.37 / 個
データシートを見る →DSPIC33FJ32MC102T-I/ML
✅ ドロップイン✓ 在庫あり
$2.18 / 個
データシートを見る →DSPIC33FJ32GP304-I/ML
✅ ドロップイン✓ 在庫あり
$3.49 / 個
データシートを見る →DSPIC33FJ16GS504-E/ML
✅ ドロップイン✓ 在庫あり
$6.21 / 個
データシートを見る →DSPIC33FJ32MC204-E/ML 最大定格＆電気的特性
| Core Architecture | 16-bit fixed-point DSC |
| Max Clock Frequency | 40 MHz (40 MIPS) |
| Program Memory (Flash) | 32 KB |
| RAM | 2 KB |
| 電源電圧 | 3.0 V to 3.6 V |
| PWM Generators | 2 with independent timebases |
| Peripheral Pin Select | Yes (PPS) |
| DSP Engine | Barrel shifter, MAC, multiple internal buses |
| 動作温度 | -40C to +125C (E grade) |
| パッケージ | 44-QFN (8x8 mm) |
| 実装タイプ | Surface Mount |
| Process Technology | CMOS |
| Low-Power Modes | Sleep, Idle |
| Boundary Scan | Yes |
| Family Migration | Pin-compatible with PIC24F, PIC24H, dsPIC30F, dsPIC33F families |
| Evaluation Tool | MA330017 PIM for Explorer 16 |
DSPIC33FJ32MC204-E/ML 44-qfn (8x8 mm) ピン配置ガイド
DSPIC33FJ32MC204-E/ML (44-qfn (8x8 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33FJ32MC204-E/ML.
詳細は データシート をご参照ください。
主な用途
DSPIC33FJ32MC204-E/ML の用途: 6 件s: BLDC / PMSM Motor Control, Digital Power Conversion (PFC / LLC), Industrial Automation and Sensor Nodes, Embedded Closed-Loop Control Systems, Automotive-Adjacent Actuator Control, Battery-Powered Portable Instruments.
BLDC / PMSM Motor Control
The DSPIC33FJ32MC204-E/ML is purpose-built for brushless DC and permanent-magnet synchronous motor drives. Its two PWM generators with independent timebases generate the three-phase complementary PWM with hardware dead-time insertion, while the 40 MIPS DSP core executes field-oriented control current loops in tens of microseconds. Peripheral Pin Select routes encoder, ADC-trigger, and fault inputs optimally on the 44-pin QFN, and the extended -40C to +125C E-grade tolerates enclosed drive temperatures. Placed as the sole controller between current-sense shunts and the gate-driver stage, it eliminates external DSP chips; the trade-off is that 2 KB RAM requires disciplined FOC state-variable budgeting.
おすすめ
Digital Power Conversion (PFC / LLC)
In switch-mode power supplies such as PFC front-ends and LLC resonant converters, the DSPIC33FJ32MC204-E/ML replaces analog control loops with firmware. The independent PWM timebases directly support phase-shifted full-bridge and interleaved topologies, and the 40 MIPS core closes voltage and current loops faster than 20 kHz switching periods demand. The on-chip ADC samples voltage and current feedback synchronously with PWM for minimal control latency. Compared with fixed-function controllers, firmware enables adaptive soft-start and fault handling, but the designer must budget the 32 KB Flash for both control code and compensator logic; the GS-family DSPIC33FJ16GS504-E/ML is a specialized alternative for pure digital power.
おすすめ
Industrial Automation and Sensor Nodes
For industrial automation nodes, the DSPIC33FJ32MC204-E/ML provides 40 MIPS of signal processing with UART, SPI, and I2C for factory fieldbus front-ends, vibration-monitoring sensors, and actuator control. Peripheral Pin Select maps communication and timing peripherals to whichever of the 44 pins suits the PCB, simplifying connector placement and layer routing. The extended -40C to +125C temperature range and CMOS low-power modes (Sleep and Idle) suit sealed enclosures near motors. A typical node uses the DSP engine to run FFT-based vibration analysis locally before transmitting over RS-485, reducing upstream bandwidth; 2 KB RAM caps buffer depth, so window sizes must be chosen accordingly.
おすすめ
Embedded Closed-Loop Control Systems
Generic closed-loop control - positioning stages, pressure regulators, thermal systems - benefits from the DSPIC33FJ32MC204-E/ML's single-cycle MAC and barrel shifter for PID and filter computations. At 40 MIPS, a PID loop with 16-bit arithmetic executes in a few microseconds, leaving ample margin for 10 kHz-plus update rates. The 32 KB Flash holds control law, ramp generators, and a communication stack simultaneously. Designers migrating from dsPIC30F or PIC24H devices get seamless code migration per Microchip's family documentation. The key design consideration is interrupt latency budgeting: keep high-priority control ISRs short and push non-critical tasks such as protocol parsing to the main loop to preserve loop determinism.
おすすめ
Automotive-Adjacent Actuator Control
While not AEC-Q100 qualified, the -40C to +125C extended E-grade of the DSPIC33FJ32MC204-E/ML makes it suitable for harsh-environment actuator control in off-highway equipment, agricultural machinery, and industrial vehicles where full automotive qualification is not contractually required. The dual independent PWM timebases drive DC actuator H-bridges or pump inverters, and the DSP core handles position feedback decoding from hall or resolver signals at 40 MIPS. The 44-QFN (8x8 mm) package conserves PCB area in compact actuator housings. Engineers must verify vibration and lifetime requirements independently, since Microchip does not claim automotive qualification for this specific part number.
おすすめ
Battery-Powered Portable Instruments
Portable test and measurement instruments use the DSPIC33FJ32MC204-E/ML for signal capture and processing on a single 3.0V to 3.6V lithium-derived rail. The on-chip ADC with flexible scan modes digitizes sensor inputs while the DSP engine performs averaging, RMS computation, and digital filtering without a host processor. Sleep and Idle low-power modes extend battery life between measurements, and Peripheral Pin Select keeps the 44-QFN layout compact for handheld enclosures. Compared with an MCU-plus-DSP chip-set, this single-chip solution cuts BOM cost and quiescent load; the trade-off is 32 KB Flash, so instrument firmware must avoid heavyweight libraries and use fixed-point math throughout.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33FJ32MC204-E/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP64MC204-E/ML | DSPIC33FJ32MC204-I/ML | DSPIC33FJ32MC102T-I/ML | DSPIC33FJ32GP304-I/ML | DSPIC33FJ16GS504-E/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same | 44-QFN (8x8 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 64 KB | 32 KB | 16 KB | 32 KB | 16 KB |
| Core Performance | 16-bit, 40 MIPS (dsPIC33F) | 16-bit, 70 MIPS (dsPIC33E) | 16-bit, 40 MIPS (dsPIC33F) | 16-bit, 40 MIPS (dsPIC33F) | 16-bit, 40 MIPS (dsPIC33F) | 16-bit, 50 MIPS (dsPIC33F GS) |
| Family / Peripheral Focus | Motor Control (MC PWM, 2 independent timebases) | Motor Control (dsPIC33E, +DMA) | Motor Control (identical) | Motor Control value line | General Purpose (no MC PWM) | Digital Power (GS) |
| Temperature Range | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) |
| DMA | No | Yes | No | No | No | No |
主な差別化要因
- Extended -40C to +125C temperature rating （vs DSPIC33FJ32MC204-I/ML)
- Dedicated Motor Control PWM with independent timebases （vs DSPIC33FJ32GP304-I/ML)
- Lower cost per pin versus dsPIC33E upgrade （vs DSPIC33EP64MC204-E/ML)
設計ノート
The dsPIC33F core requires a strict 3.0V to 3.6V supply with fast transient response. Decouple each VDD pin with 0.1 uF ceramic capacitors placed within 2 mm of the pin, plus one bulk 4.7-10 uF capacitor near the package. All VSS pins and the exposed pad must connect to a solid ground plane - on the 44-QFN (8x8 mm) the center pad is the primary thermal and ground path, so use a 3x3 via array under it. If the board shares a supply with motor drive circuitry, add an LC or ferrite filter to keep PWM switching noise out of the VDD rail.
Peripheral Pin Select (PPS) is this device's greatest layout asset: before routing, assign PWM, UART, SPI, and input-capture functions to pins that minimize crossings and keep high-current PWM traces short and wide. Keep the analog inputs away from PWM switching nodes, and use the ADC simultaneous-sampling window triggered from the PWM timebase to sample current away from switching edges. Route MCLR, PGD, and PGC to a 5-pin ICSP header even in production - field firmware updates via bootloader require the bootloader image flashed at programming time.
Three recurring pitfalls with this part: (1) 2 KB RAM is exhausted quickly by FOC variables plus UART buffers - check the linker map early and use fixed-point Q15 math rather than floating point. (2) Configuration fuses (oscillator source, watchdog, PWM pin mode) live in Flash and are only written at device programming; wrong oscillator settings yield a 4x or wrong-frequency clock since Fcy = Fosc/2 for dsPIC33F. (3) The -E grade is rated to +125C ambient, but total power dissipation in the QFN limits it - verify junction temperature with your actual switching activity near the upper limit.
コンプライアンス情報
RoHS/lead-free status typical of Microchip /E-grade QFN parts; AEC-Q100 qualification is not claimed for this part number. Verify current REACH and material declarations from microchip.com for your date code.