EFM32G842F32G-E-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
部品番号: EFM32G842F32G-E-QFP64 ✓ 生産中EFM32G842F32G-E-QFP64 概要
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G842 belongs to the EFM32 Gecko family, placing it in the hierarchy of 32-bit MCU, embedded microcontroller, semiconductor, and energy-sensitive embedded control platform. This family combines ARM Cortex-M3 processing with peripherals designed for low-power sensing, communications, industrial monitoring, and portable products.
The device provides 32 kB of Flash for firmware and 8 kB of RAM for working data, while 53 digital I/O pins allow direct connection to sensors, indicators, human-interface interfaces, and external control signals. Three 16-bit timers support periodic measurement, motor-control timing, or timing-base functions. The listing also identifies a 4 x 22 LCD interface and AES capability, providing dedicated resources for human-readable displays and hardware-assisted encryption without requiring separate peripheral devices.
The Cortex-M3 architecture supports efficient 32-bit instruction execution, fast interrupt handling, and a compact software model for event-driven embedded control. Low-energy modes and fast wake-up behavior allow the processor to remain in a low-power state between events, then respond quickly when sensor, communication, or user-interface activity requires processing. These characteristics make the MCU suitable for duty-cycled systems in which average energy use is more important than continuous processing performance.
Typical uses include industrial sensor nodes, building automation endpoints, energy meters, low-power communications equipment, compact environmental monitors, and consumer products with LCD displays. The 64-pin package provides substantially more I/O capacity than a small 20- or 32-pin microcontroller, making it useful when a design needs parallel control inputs, display connections, analog peripheral access, or several communication interfaces while retaining a moderate board footprint.
PCB implementation should preserve the manufacturer's recommended power, decoupling, clock, and programming connections. Place the MCU's decoupling capacitors close to the appropriate supply pins, route sensitive clock and communications paths away from fast-switching nodes, and use a ground plane that supports both signal return paths and thermal dissipation. Before firmware release, validate reset behavior, sleep-mode wake-up, timer accuracy, and the peripheral assignments required by the target board.
This product page combines manufacturer specifications, package details, sourcing information, and engineering-focused alternatives and design guidance. It also distinguishes exact drop-in candidates from options with different memory configurations, helping engineers assess PCB reuse without overlooking the changes required for firmware, memory, or production sourcing.
ドロップイン代替品: EFM32G842F32G-E-QFP64 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EFM32G842F32G-E-QFP64 (同一形状・フットプリント) — 相違点: Package, Timers, Digital I/O Pins, Flash Memory, LCD Support.
EFM32G842F32-QFP64
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G842F64-QFP64
✅ ドロップイン価格はお問い合わせください
データシートを見る →EFM32G842F64G-E-QFP64R
✅ ドロップイン📋 参考代替品(カタログ未掲載)
EFM32G841F32G-E-QFP64
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32G841F64G-E-QFP64
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EFM32G842F32G-E-QFP64 最大定格&電気的特性
| Core | ARM Cortex-M3, 32-bit |
| Maximum Clock Speed | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 8 kB |
| Digital I/O Pins | 53 pins |
| Timers | 3 x 16-bit timers |
| LCD Support | 4 x 22 LCD |
| Security Feature | AES hardware encryption |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 64-TQFP, 10 x 10 mm |
| 実装タイプ | Surface mount |
EFM32G842F32G-E-QFP64 64-tqfp, 10 x 10 mm ピン配置ガイド
EFM32G842F32G-E-QFP64 (64-tqfp, 10 x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EFM32G842F32G-E-QFP64.
詳細は データシート をご参照ください。
主な用途
EFM32G842F32G-E-QFP64 の用途: 6 件s: Industrial Sensor Nodes, Building Automation Endpoints, Energy Metering Equipment, LCD-Equipped Portable Instruments, Low-Power Communications Equipment, Security-Enabled Embedded Control.
Industrial Sensor Nodes
The EFM32G842F32G-E-QFP64 fits industrial sensor nodes that combine several discrete inputs with duty-cycled processing. Its 53 digital I/O pins leave capacity for digital sensors, threshold inputs, status indicators, and actuator interlocks, while the 32 MHz Cortex-M3 core can process measurements and communication routines without raising the clock beyond the device's stated maximum. Fast wake-up behavior is valuable when a node must remain mostly asleep but respond promptly to an external event. The 1.98 V to 3.8 V operating range also allows the MCU to operate from a regulated low-voltage rail, although regulator selection must account for sensor and radio loads separately.
おすすめ
Building Automation Endpoints
The EFM32G842F32G-E-QFP64 is well suited to building automation endpoints that supervise switches, inputs, outputs, and local user controls. Its 53 digital I/O pins reduce the need for external GPIO expanders in designs with numerous field signals, while the 32 kB Flash and 8 kB RAM are sufficient for compact protocol stacks, scheduling logic, and diagnostic data. Low-energy operating modes help limit consumption in rooms that are sparsely occupied, and fast wake-up allows endpoint behavior to respond quickly after inactivity. Firmware should still define debounce, failsafe states, and restart behavior for each connected actuator.
おすすめ
Energy Metering Equipment
The EFM32G842F32G-E-QFP64 can serve as the control MCU in compact energy-metering equipment where pulse counting, status tracking, local configuration, and low standby consumption are required. Three 16-bit timers provide dedicated resources for frequency or elapsed-time measurement, while the 53 I/O pins support sensor inputs, display controls, and isolation or interface signals. The Cortex-M3 core can execute measurement processing, calibration routines, and communications between external events. For accurate metering, isolate high-current power paths from the microcontroller ground and follow the manufacturer layout guidance for sensitive analog and timing circuitry.
おすすめ
LCD-Equipped Portable Instruments
The EFM32G842F32G-E-QFP64 is appropriate for portable instruments or handheld service tools that use a local LCD and need a moderate number of controls. Its dedicated 4 x 22 LCD interface simplifies the display connection, and 53 digital I/O pins can support buttons, indicators, external sensors, and communications. The 32 MHz Cortex-M3 core supports responsive menu, measurement, and logging tasks, while low-energy modes help extend operating time between charges. The 64-TQFP package offers more I/O than a small LCD-capable MCU, making it useful when the enclosure exposes several external connections.
おすすめ
Low-Power Communications Equipment
The EFM32G842F32G-E-QFP64 can coordinate communications in low-power sensor and gateway equipment where the radio is active only intermittently. Its fast wake-up behavior permits the MCU to remain in an energy-saving state between packets, receive an interrupt from communications hardware, and process data without excessive startup delay. The 53 I/O pins support the radio interface, configuration controls, status indicators, and auxiliary sensors, while three 16-bit timers can support protocol timing or periodic transmission functions. Keep radio supplies and high-current switching paths isolated from sensitive MCU rails, and calculate average consumption using the datasheet operating modes plus measured radio activity.
おすすめ
Security-Enabled Embedded Control
The EFM32G842F32G-E-QFP64 is suitable for embedded products that need authenticated or encrypted data handling close to the sensor or actuator. Its AES hardware capability accelerates supported cryptographic operations while the 32 MHz Cortex-M3 core manages the surrounding protocol and control logic. The 53 I/O pins permit integration of sensors, secure elements, status indicators, and communication hardware, and the 8 kB RAM supports moderate protocol buffers and working state. Firmware designers should still define key provisioning, certificate validation, failure behavior, and update procedures, because the presence of AES hardware does not by itself secure the complete product architecture.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EFM32G842F32G-E-QFP64 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EFM32G842F32-QFP64 | EFM32G842F64-QFP64 | EFM32G842F64G-E-QFP64R | EFM32G841F32G-E-QFP64 | EFM32G841F64G-E-QFP64 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) |
| CPU Core | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 kB | 32 kB | 64 kB | 64 kB | 32 kB | 64 kB |
| RAM | 8 kB | 8 kB | 16 kB | 16 kB | 8 kB | 16 kB |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
主な差別化要因
- Matches the base device's core, memory, I/O, and footprint (vs EFM32G842F32-QFP64)
- Provides twice the memory without changing the processor speed (vs EFM32G842F64-QFP64)
- Combines 53 I/O pins with a dedicated LCD interface (vs EFM32G841F32G-E-QFP64)
設計ノート
Use the manufacturer power-supply recommendations for the 1.98 V to 3.8 V operating range. Place the required bypass capacitors adjacent to the associated supply and ground pins, keeping their ground returns short and direct to the appropriate plane. If the board includes a radio, sensor heater, relay, or display backlight, separate those loads from the MCU rail so switching current does not create ground bounce or disturb sensitive measurements.
Follow the manufacturer land pattern and pin-assignment guidance for the 64-TQFP 10 x 10 mm package. Preserve access to programming and debug signals, keep clock routing short, and isolate clock and communications routes from switching power nodes. A continuous ground plane helps return high-frequency current, but thermal and analog areas should follow the datasheet layout because uninterrupted copper is not automatically optimal around every sensitive circuit.
Do not assume that every similarly named EFM32G842 ordering code is interchangeable for production. The base, memory-density, temperature, and packing suffixes must be checked against the manufacturer ordering table. Likewise, moving from the 32 kB Flash and 8 kB RAM device to a 64 kB and 16 kB variant requires a new linker-memory assessment even when the physical footprint remains unchanged.
コンプライアンス情報
AEC-Q100 is not applicable to this general-purpose microcontroller. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product entry or declaration.