EP20K1000CB652C7NJ - APEX 20KC FPGA 1M Gates 652-BGA | Altera
部品番号: EP20K1000CB652C7NJ ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $255 | $2,550.00 |
| 100 | $220 | $22,000.00 |
| 500 | $195 | $97,500.00 |
| 1,000 | $175 | $175,000.00 |
EP20K1000CB652C7NJ 概要
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to perform a wide range of digital logic functions. FPGAs sit hierarchically within programmable logic devices (PLDs), which themselves belong to the broader digital IC and ASIC-replacement category. Modern FPGAs combine configurable logic blocks (CLBs), programmable interconnect, embedded memory, multipliers/DSP slices, and high-speed transceivers, enabling hardware-level parallelism far beyond what general-purpose microcontrollers or DSPs can achieve at comparable cost for a given workload.
Key features of the EP20K1000CB652C7NJ include 488 user I/O pins, 327,680 bits of embedded memory, four phase-locked loops (PLLs) for clock management, MultiCore embedded memory architecture, and pin compatibility with the APEX 20KE family for design reuse. The 652-pin FCBGA package supports high-density board designs with controlled-impedance signal integrity for parallel and serial high-speed interfaces.
Architecturally, the APEX 20KC combines LUT-based logic with embedded system blocks that can each implement dual-port RAM, ROM, or content-addressable memory. The 0.15-micron copper interconnect reduces propagation delay and dynamic power versus the aluminum-process APEX 20K, while remaining pin-compatible so existing 20KE boards accept the 20KC device without re-layout.
Typical applications include high-speed telecom backplanes, parallel DSP pipelines, ASIC prototyping, industrial imaging and video processing, and military/aerospace signal processing. The 488 I/O and abundant internal memory also make this part suitable for legacy system sustainment and form-fit-function replacement programs.
When designing with this part, engineers must plan for the 1.8V core supply and provide adequate decoupling around the BGA footprint. JTAG configuration via the ByteBlaster or MasterBlaster cable is supported, but Quartus II software (legacy Altera IDE) is required for synthesis, place-and-route, and bitstream generation.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet summary, helping procurement and engineering teams evaluate the EP20K1000CB652C7NJ for both new designs and legacy sustainment programs.
ドロップイン代替品: EP20K1000CB652C7NJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP20K1000CB652C7NJ （同一形状・フットプリント） — 相違点: Operating Temperature, Process Technology, Package, Speed Grade, Family.
クイック比較ツール — 並列比較する代替部品を選択:
EP20K1000EBC652-3
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EP20K1000CBC652
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EP20K1000CB652C7N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
EP20K1000CB652C8N
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
EP20K600CB652C7
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1320 / 個
データシートを見る →EP20K1000CB652C7NJ 最大定格＆電気的特性
| Family | APEX 20KC |
| Logic Elements | 38,400 |
| System Gates | 1,000,000 |
| Embedded Memory | 327,680 bits |
| User I/O Pins | 488 |
| Maximum Frequency | 375.94 MHz |
| Process Technology | 0.15 um CMOS (all-layer copper) |
| Core Supply Voltage | 1.8 V |
| パッケージ | 652-pin FCBGA (FineLine BGA) |
| 実装タイプ | Surface Mount |
| 動作温度 | Commercial (0C to +70C) per C7 speed grade |
| Configuration Interface | JTAG (ByteBlaster/MasterBlaster) + serial/parallel modes |
| PLLs | 4 |
| Pin-Compatible Family | APEX 20KE |
| Design Software | Quartus II (legacy Altera IDE) |
| Lifecycle | Obsolete - last time buy per Altera PCN |
EP20K1000CB652C7NJ 652-pin fcbga (fineline bga) ピン配置ガイド
EP20K1000CB652C7NJ (652-pin fcbga (fineline bga) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP20K1000CB652C7NJ.
詳細は データシート をご参照ください。
主な用途
EP20K1000CB652C7NJ の用途: 6 件s: Telecom Backplane Aggregation, ASIC Prototyping, Industrial Imaging and Video Processing, Military/Aerospace Signal Processing, Legacy Sustainment and Form-Fit-Function Replacement, Digital Signal Processing (DSP) Datapath Implementation.
Telecom Backplane Aggregation
The EP20K1000CB652C7NJ's 488 user I/O pins and 1,000,000 system gates make it well-suited for high-density telecom backplane aggregation fabrics where parallel LVDS or HSTL buses aggregate multiple lower-speed serial links. With 327,680 bits of embedded memory it can buffer packet payloads on-chip, eliminating external SRAM. The 652-pin FCBGA package supports the controlled-impedance routing required for 100 MHz+ parallel backplane operation, while the 4 PLLs provide multiple clock domains needed for system-side and line-side synchronization.
おすすめ
ASIC Prototyping
With 38,400 logic elements and 1 million system gates, the EP20K1000CB652C7NJ can emulate mid-complexity ASIC designs (typical gate-equivalent of 500-800K ASIC gates) for pre-silicon validation. Its MultiCore architecture combining LUTs with embedded system blocks allows accurate modeling of SRAM/ROM macros alongside random logic. Engineers can iterate RTL in Quartus II, perform real-time at-speed verification, and debug with SignalTap embedded logic analyzer, reducing tape-out risk for the target ASIC.
おすすめ
Industrial Imaging and Video Processing
The device's 488 I/O and abundant internal memory make it effective for parallel pixel processing pipelines in machine vision and broadcast video equipment. Embedded system blocks can implement line buffers and frame buffers, while LUT-based datapaths perform real-time pixel transforms, color space conversion, and edge detection at video rates up to 375.94 MHz. The FCBGA package provides the thermal headroom and signal integrity needed for sustained parallel video throughput in factory-floor imaging systems.
おすすめ
Military/Aerospace Signal Processing
The APEX 20KC's mature copper-interconnect process and documented reliability make it a candidate for legacy defense and aerospace systems where re-qualification cost outweighs the benefits of migrating to newer families. The device's deterministic LUT-based architecture is well understood for safety-critical DSP functions such as radar pulse compression, beamforming, and EW signal generation. For new military designs, however, consult DSCC-qualified parts or move to a current radiation-tolerant family such as Microsemi/RTAX.
おすすめ
Legacy Sustainment and Form-Fit-Function Replacement
The EP20K1000CB652C7NJ is most commonly sourced today for legacy system sustainment programs - aircraft, ships, and industrial control systems originally designed around APEX 20K/KE/KC where the PCB and firmware must remain unchanged. Authorized obsolete-stock distributors (Rochester Electronics, legacy Altera distributors) maintain franchised inventory with full traceability and original test programs. Engineers performing FFF replacement should verify the date code, lot traceability, and counterfeit-mitigation documentation before integration.
おすすめ
Digital Signal Processing (DSP) Datapath Implementation
The 20KC's embedded system blocks can implement multiplier-accumulators, FIR filters, and FFT butterflies when configured with arithmetic mode, enabling DSP datapaths in the 100-300 MHz range without external DSP chips. For SDR baseband processing, channelization, or software-defined radio modems, the EP20K1000CB652C7NJ provides a balance of logic and memory for moderate-complexity algorithms. For higher DSP throughput, migrate to Stratix II/III/IV with dedicated DSP blocks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP20K1000CB652C7NJ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP20K1000EBC652-3 | EP20K1000CBC652 | EP20K1000CB652C7N | EP20K1000CB652C8N | EP20K600CB652C7 |
|---|---|---|---|---|---|---|
| Package | 652-pin FCBGA | 652-pin FCBGA - same | 652-pin FCBGA - same | 652-pin FCBGA - same | 652-pin FCBGA - same | 652-pin FCBGA - same |
| Brand | Altera (Intel FPGA) | Altera | Altera | Altera | Altera | Altera |
| System Gates | 1,000,000 | 1,000,000 | 1,000,000 | 1,000,000 | 1,000,000 | 600,000 (-40%) |
| Logic Elements | 38,400 | 38,400 | 38,400 | 38,400 | 38,400 | 23,040 (-40%) |
| User I/O | 488 | 488 | 488 | 488 | 488 | 488 |
| Process / Family | 0.15um APEX 20KC | 0.18um APEX 20KE | 0.15um APEX 20KC | 0.15um APEX 20KC | 0.15um APEX 20KC | 0.15um APEX 20KC |
| Speed Grade | -7 (375.94 MHz) | -3 (slower) | -7 | -7 | -8 (slower) | -7 |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Lifecycle | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
主な差別化要因
- Highest-density 20KC speed grade available （vs EP20K600CB652C7)
- Faster speed grade than -8 variant （vs EP20K1000CB652C8N)
- Pin-compatible upgrade from APEX 20KE （vs EP20K1000EBC652-3)
設計ノート
The 652-pin FCBGA package requires a multi-layer PCB (typically 6-8 layers minimum) with microvia or via-in-pad technology for reliable BGA assembly. Use a 1.0 mm ball pitch (or 1.27 mm for the older FineLine variant) and follow Altera's recommended land pattern and solder paste stencil. Decouple each VCCINT/VCCIO pin with a 0.1uF X7R ceramic placed as close as physically possible to the ball, plus bulk 10-47uF tantalum or polymer capacitors on each supply plane.
Do not confuse the 'CB652' package suffix (652-pin FCBGA, 1.27 mm pitch FineLine) with the later 'CB652C7N' form. The trailing 'J' suffix in 'C7NJ' indicates an extended temperature or screening option that must be verified against the device datasheet before substituting. Always confirm the full MPN including all suffix characters match the original Altera datasheet order code when sourcing obsolete stock.
Differential pairs (LVDS, PECL) should be length-matched within 50 mils for 100 MHz operation and within 20 mils for 200+ MHz. Route each LVDS pair on a single inner layer with continuous ground plane reference, and avoid routing over power plane splits. The 4 PLLs each require their own quiet analog VCC plane (VCC_PLL) decoupled with a Pi filter (ferrite bead + 0.1uF + 10uF) to minimize jitter.
コンプライアンス情報
Lead-free per 'N' suffix in MPN. RoHS/REACH status not stated in the verified web data. AEC-Q100 not applicable - this is an FPGA, not an automotive analog IC. Halogen-free status not stated. Conflict minerals compliance not stated.
