EP4CE22F17I8LN - 22,320 LE Industrial Cyclone IV E FPGA
部品番号: EP4CE22F17I8LN ✓ 生産中EP4CE22F17I8LN 概要
A field-programmable gate array is a programmable-logic semiconductor that combines configurable logic, memory, programmable I/O, and embedded digital resources on one device. The FPGA belongs to the Cyclone IV E hierarchy, where “Cyclone IV E” identifies the device family and “FPGA” identifies its role as a reconfigurable digital-logic platform. The EP4CE22 density is intended for embedded control, interface bridging, signal processing, and general-purpose parallel logic rather than processor-dominated systems.
The EP4CE22F17I8LN provides 22,320 logic elements and 594 Kb of block RAM. Its speed grade 8 identifies the performance class used for timing analysis, while the industrial temperature designation supports operation from -40 °C to 100 °C junction temperature. The 1.2 V core voltage is a key design constraint because the FPGA also requires suitable bank-specific supply rails for its external I/O standards. A 256-pin FBGA provides a compact surface-mount footprint but requires careful via, escape-routing, and thermal-management practices.
The “F17” ordering code identifies the physical package and pin arrangement, while “I8” identifies the industrial-temperature and speed-grade combination. The “LN” suffix is retained as part of the exact ordering code. Configuration, programming, JTAG boundary-scan access, and user I/O behavior depend on the selected configuration scheme and device architecture. Designers should use the pin-description table in the manufacturer datasheet when assigning board nets and must preserve the required power, ground, configuration, and decoupling connections for this exact F17 package.
Typical uses for EP4CE22F17I8LN include industrial control modules, multi-channel data acquisition, protocol conversion, video timing, communications equipment, and embedded test systems. In these applications, the FPGA can implement parallel control logic, interface state machines, packet processing, timing generation, or local data pipelines while 594 Kb of block RAM provides on-chip storage. The compact FBGA is advantageous for space-constrained equipment, although board complexity increases compared with a leaded package.
When planning a PCB around EP4CE22F17I8LN, prioritize uninterrupted power and ground planes, short return paths beneath the device, and decoupling capacitors placed directly at the relevant supply pins. Follow the manufacturer’s escape-routing guidance for configuration signals and differential I/O. Program the device and validate timing with the Quartus design flow, using the EP4CE22F17 speed-8 timing model and the F17 pin constraints.
This page combines the exact ordering-code details, package characteristics, sourcing references, configuration guidance, and a same-footprint comparison of closely related Cyclone IV E options. It also distinguishes genuine ordering-code differences from alternatives that would require a different FPGA, package, pinout, or board redesign.
ドロップイン代替品: EP4CE22F17I8LN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
EP4CE22F17I7LN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EP4CE22F17C8LN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EP4CE22F17C7LN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EP4CE22F17I6LN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EP4CE22F17C6LN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
EP4CE22F17I8LN 最大定格&電気的特性
| Device Type | Cyclone IV E field-programmable gate array |
| Logic Elements | 22,320 |
| Block RAM Capacity | 594 Kb |
| Core Supply Voltage | 1.2 V |
| Speed Grade | Grade 8 |
| Temperature Grade | Industrial |
| 動作温度範囲 | -40 °C to 100 °C junction |
| パッケージ | 256-pin FBGA |
| Package Dimensions | 17 mm x 17 mm |
| Package Family Code | F17 |
| 実装タイプ | Surface mount |
| Packaging | Tray |
| Programmable Logic | 22,320 configurable logic elements |
| Embedded Memory | 594 Kb block RAM |
EP4CE22F17I8LN f17 ピン配置ガイド
EP4CE22F17I8LN (f17 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP4CE22F17I8LN.
詳細は データシート をご参照ください。
主な用途
EP4CE22F17I8LN の用途: 6 件s: Industrial Control and Automation, Data Acquisition and Signal Processing, Communications Protocol Conversion, Video Timing and Display Control, Embedded Test and Measurement, Automotive and Heavy-Duty Control.
Industrial Control and Automation
The EP4CE22F17I8LN fits industrial control systems that require deterministic parallel logic across multiple sensors, actuators, and machine interfaces. Its 22,320 logic elements can implement state machines, interlocks, counters, protocol handling, and timing logic, while 594 Kb of block RAM supports local buffering between acquisition and control stages. The industrial rating covers -40 °C to 100 °C junction temperature, making it appropriate for factory equipment where enclosure temperature varies. Keep the FPGA core at 1.2 V, use separate bank supplies where required, and validate all interfaces with the exact F17 pin assignments.
おすすめ
Data Acquisition and Signal Processing
EP4CE22F17I8LN is suitable for parallel data-acquisition front ends that combine filtering, channel interleaving, trigger handling, and data packing before transfer to a processor. The FPGA's 22,320 logic elements support parallel datapaths and control structures, and its 594 Kb of block RAM can buffer samples or implement finite-state-machine processing without external memory. Use the device for deterministic acquisition timing and maintain separate clock and I/O supply domains according to the manufacturer pin table. Signal timing must be reanalyzed with the selected speed-grade timing model because replacing grade 8 with a lower-grade option can narrow setup and hold margins.
おすすめ
Communications Protocol Conversion
The EP4CE22F17I8LN can bridge legacy parallel and serial interfaces in communications equipment by implementing framing, endian conversion, FIFOs, and protocol state machines. Its 594 Kb of block RAM is useful for buffering traffic between domains with different clock rates, while 22,320 logic elements provide parallel datapath capacity. The F17 256-pin FBGA keeps the device compact but requires deliberate escape routing for differential or high-speed interfaces. Assign each interface to the appropriate I/O bank and voltage, constrain all clocks in Quartus, and verify timing after any speed-grade substitution.
おすすめ
Video Timing and Display Control
EP4CE22F17I8LN is applicable to video timing, pixel conversion, test-pattern generation, and display-control modules that require reconfigurable parallel logic. The 22,320 logic elements can implement timing generators, counters, gamma tables, overlay control, and interface adapters, while 594 Kb of block RAM accommodates line buffers or small frame-processing stages. The industrial-temperature grade supports equipment operating beyond typical office conditions. Video interfaces require careful data-bus timing, source-synchronous routing, and suitable I/O-bank voltages, so use the manufacturer F17 pinout and Quartus timing constraints rather than generic BGA assumptions.
おすすめ
Embedded Test and Measurement
The EP4CE22F17I8LN can serve as the programmable control and acquisition core in compact test systems, where sequencing, pattern generation, timing control, and result logging must be customized. Its 22,320 logic elements and 594 Kb of block RAM are well suited to parallel counters, pattern generators, acquisition pipelines, and communication state machines. The industrial grade covers -40 °C to 100 °C junction temperature for use in factory or laboratory instrumentation. Synchronize sampling paths to dedicated clock pins, preserve a continuous ground reference beneath the FBGA, and treat changes in speed grade as timing changes requiring complete recompilation and validation.
おすすめ
Automotive and Heavy-Duty Control
EP4CE22F17I8LN is suited to robust control modules requiring an industrial-temperature programmable-logic device for sensor conditioning, actuator sequencing, diagnostics, and communications. The device can implement redundant state machines and local data handling while its 22,320 logic elements provide parallel control capacity. Because automotive qualification is not established by the industrial-temperature designation alone, vehicle programs must separately verify quality-system, reliability, AEC-Q100, and environmental requirements. The 256-pin FBGA also demands a stable power plan, adequate via-in-pad or via-adjacent escape routing, and thermal validation in the completed enclosure.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP4CE22F17I8LN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP4CE22F17I7LN | EP4CE22F17C8LN | EP4CE22F17C7LN | EP4CE22F17I6LN | EP4CE22F17C6LN |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 256-FBGA (F17) | 256-FBGA (F17) - same | 256-FBGA (F17) - same | 256-FBGA (F17) - same | 256-FBGA (F17) - same | 256-FBGA (F17) - same |
| Logic Elements | 22,320 | 22,320 | 22,320 | 22,320 | 22,320 | 22,320 |
| Block RAM | 594 Kb | 594 Kb | 594 Kb | 594 Kb | 594 Kb | 594 Kb |
| Core Supply | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | Grade 8 | Grade 7 | Grade 8 | Grade 7 | Grade 6 | Grade 6 |
| Temperature Grade | Industrial | Industrial | Commercial | Commercial | Industrial | Commercial |
| Package Dimensions | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm |
主な差別化要因
- Higher timing class within the same EP4CE22 F17 family (vs EP4CE22F17I7LN)
- Industrial-temperature capability for wider operating environments (vs EP4CE22F17C8LN)
- Combines the EP4CE22 resource level with a compact 17 mm by 17 mm package (vs EP4CE22F17I6LN)
設計ノート
Use the manufacturer power plan for the 1.2 V core and every I/O bank. Place the required bypass capacitance directly beside the associated supply and ground balls, preserve uninterrupted reference planes beneath the FPGA, and route each rail to the pins through low-impedance paths. Validate startup sequencing, rail tolerance, and worst-case current in the Quartus power-planning tool; the 1.2 V core rating alone does not describe the complete board supply requirement.
Design the PCB specifically for the F17 256-pin FBGA rather than a generic 256-ball footprint. Follow the manufacturer escape-routing pattern for configuration, clock, and high-speed interface balls, maintain the required ball-pad geometry, and provide inspection access for assembly. Continuous ground copper and short via connections from power balls are especially important because the compact package has limited escape space and no long package leads through which heat and current can disperse.
Separate clocks, high-speed data buses, and sensitive analog-adjacent digital interfaces in the board layout even when their logical domains are related. Use short point-to-point clock routes, provide continuous return paths, and avoid plane splits beneath switching nodes. After component placement, inspect every user I/O against the F17 pin table and confirm that each signal's voltage standard is supported by the selected bank before releasing the PCB for fabrication.
Do not treat the EP4CE22F17I8LN, EP4CE22F17I7LN, and commercial-temperature variants as unconditional substitutes. The I versus C ordering segment changes the temperature grade, while 6, 7, and 8 identify different timing classes. Recompile the design with the alternate device, review all timing reports, and verify the pinout, configuration behavior, power requirements, and operating environment before approving a drop-in replacement.
コンプライアンス情報
The manufacturer ordering page contains trade-compliance and material-attribute information, but individual compliance conclusions are not reproduced here. The industrial-temperature grade must not be interpreted as AEC-Q100 qualification.