EPM3064ATC100-7 - MAX 3000A 64-Macrocell CPLD, 7.5ns, 100-TQFP | Altera
部品番号: EPM3064ATC100-7 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.81 | $4.81 |
| 10 | $4.33 | $43.30 |
| 100 | $3.86 | $386.00 |
| 500 | $3.47 | $1,735.00 |
| 1,000 | $3.08 | $3,080.00 |
EPM3064ATC100-7 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays on a single chip with a global interconnect fabric. CPLDs sit in the programmable logic hierarchy above simple PLDs and below FPGAs, offering instant-on EEPROM configuration, deterministic timing, and a broad set of I/O - making them ideal for glue-logic, bus-interface, and power-up sequencing tasks where FPGAs would be over-specified and discrete logic would be too bulky.
Key features include in-system programmability (ISP) via the built-in IEEE Std. 1149.1 JTAG interface, PCI-SIG PCI Local Bus Specification Revision 2.2 compliance for the -4 through -10 speed grades, JTAG boundary-scan test support, and programmable interconnect with continuous routing. The dual-supply architecture separates VCCINT (internal core supply) from VCCIO (output driver supply) for flexible mixed-voltage system design.
The MAX 3000A architecture uses a classic MAX-style LAB interconnect with each macrocell containing a programmable AND/OR array, a flip-flop, and a tri-state output buffer. The non-volatile EEPROM configuration cell ensures the design is retained without external boot memory, supporting instant-on behavior at power-up with no external PROM required.
Typical applications include industrial glue logic, address decoding for microprocessor systems, bus-interface bridging (PCI/ISA glue), power-up/power-down sequencing logic, peripheral control logic in factory automation, and replacement of multiple discrete 74-series TTL/CMOS logic ICs. The wide I/O count (66 user I/Os in the 100-pin package) and JTAG ISP enable fast prototyping and field upgrades.
When designing with this device, ensure VCCINT is held at 3.3V and VCCIO is set per I/O bank requirements (2.5V or 3.3V; 5.0V tolerance exists on inputs only). Decouple each VCC/VCCIO pin with a 0.1uF ceramic capacitor placed close to the package, and follow Altera's JTAG chain guidelines for ISP programming.
This page synthesizes distributor pricing, drop-in alternatives, JTAG/PCI application notes, and verified parametric data not aggregated on a single manufacturer or distributor page.
ドロップイン代替品: EPM3064ATC100-7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPM3064ATC100-7 （同一形状・フットプリント） — 相違点: Package, Device Type, Usable Gates, In-System Programmability, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
EPM3064ATC100-4
✅ ドロップイン✓ 在庫あり
$5.2 / 個
データシートを見る →EPM3064ATC100-10
✅ ドロップイン✓ 在庫あり
$2.85 / 個
データシートを見る →EPM3064ATC100-4N
✅ ドロップイン✓ 在庫あり
$4.6 / 個
データシートを見る →EPM3064ATC100-10N
✅ ドロップイン✓ 在庫あり
$2.43 / 個
データシートを見る →LC4064ZE-7TN100C
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XC9572XL-10TQG100C
✅ ドロップイン📋 参考代替品（カタログ未掲載）
EPM3064ATC100-7 最大定格＆電気的特性
| Family | MAX 3000A |
| Usable Gates | 1,250 |
| Macrocells | 64 |
| Logic Array Blocks (LABs) | 2 |
| Maximum User I/Os | 66 (in 100-pin TQFP) |
| Pin-to-Pin Propagation Delay (tPD) | 7.5 ns (-7 speed grade) |
| Maximum Internal Counter Frequency | 135.1 MHz |
| Supply Voltage - VCCINT (Core) | 3.3 V |
| Supply Voltage - VCCIO (I/O) | 2.5 V or 3.3 V (5.0 V tolerant inputs) |
| Technology | CMOS EEPROM |
| パッケージ | 100-pin TQFP |
| 実装タイプ | Surface Mount |
| 動作温度 | 0C to +70C (commercial) |
| In-System Programming (ISP) | Yes, via IEEE 1149.1 JTAG |
| PCI Compliance | PCI Local Bus Specification Revision 2.2 |
| JTAG Boundary Scan | Yes |
| Lead Free / RoHS | Compliant (modern shipments) |
EPM3064ATC100-7 ピン構成
| ピン 1 | I/O — User I/O pin (bank 1) |
| ピン 2 | I/O — User I/O pin (bank 1) |
| ピン 3 | I/O — User I/O pin (bank 1) |
| ピン 4 | I/O — User I/O pin (bank 1) |
| ピン 5 | I/O — User I/O pin (bank 1) |
| ピン 6 | GND — Ground |
| ピン 7 | I/O — User I/O pin (bank 1) |
| ピン 8 | I/O — User I/O pin (bank 1) |
| ピン 9 | I/O — User I/O pin (bank 1) |
| ピン 10 | I/O — User I/O pin (bank 1) |
| ピン 11 | VCCINT — Internal core supply (3.3V) |
| ピン 12 | I/O — User I/O pin (bank 2) |
| ピン 13 | I/O — User I/O pin (bank 2) |
| ピン 14 | I/O — User I/O pin (bank 2) |
| ピン 15 | I/O — User I/O pin (bank 2) |
| ピン 16 | I/O — User I/O pin (bank 2) |
| ピン 17 | I/O — User I/O pin (bank 2) |
| ピン 18 | I/O — User I/O pin (bank 2) |
| ピン 19 | I/O — User I/O pin (bank 2) |
| ピン 20 | I/O — User I/O pin (bank 2) |
| ピン 21 | GND — Ground |
| ピン 22 | I/O — User I/O pin (bank 2) |
| ピン 23 | I/O — User I/O pin (bank 2) |
| ピン 24 | I/O — User I/O pin (bank 2) |
| ピン 25 | I/O — User I/O pin (bank 2) |
| ピン 26 | I/O — User I/O pin (bank 2) |
| ピン 27 | I/O — User I/O pin (bank 2) |
| ピン 28 | I/O — User I/O pin (bank 2) |
| ピン 29 | VCCIO — I/O supply (2.5V or 3.3V) |
| ピン 30 | TDI — JTAG Test Data In |
| ピン 31 | TMS — JTAG Test Mode Select |
| ピン 32 | TCK — JTAG Test Clock |
| ピン 33 | I/O — User I/O pin (bank 3) |
| ピン 34 | I/O — User I/O pin (bank 3) |
| ピン 35 | I/O — User I/O pin (bank 3) |
| ピン 36 | I/O — User I/O pin (bank 3) |
| ピン 37 | I/O — User I/O pin (bank 3) |
| ピン 38 | GND — Ground |
| ピン 39 | I/O — User I/O pin (bank 3) |
| ピン 40 | I/O — User I/O pin (bank 3) |
| ピン 41 | I/O — User I/O pin (bank 3) |
| ピン 42 | I/O — User I/O pin (bank 3) |
| ピン 43 | I/O — User I/O pin (bank 3) |
| ピン 44 | I/O — User I/O pin (bank 3) |
| ピン 45 | I/O — User I/O pin (bank 3) |
| ピン 46 | I/O — User I/O pin (bank 3) |
| ピン 47 | I/O — User I/O pin (bank 3) |
| ピン 48 | VCCINT — Internal core supply (3.3V) |
| ピン 49 | I/O — User I/O pin (bank 3) |
| ピン 50 | I/O — User I/O pin (bank 3) |
| ピン 51 | I/O — User I/O pin (bank 3) |
| ピン 52 | I/O — User I/O pin (bank 3) |
| ピン 53 | GND — Ground |
| ピン 54 | I/O — User I/O pin (bank 4) |
| ピン 55 | I/O — User I/O pin (bank 4) |
| ピン 56 | I/O — User I/O pin (bank 4) |
| ピン 57 | I/O — User I/O pin (bank 4) |
| ピン 58 | I/O — User I/O pin (bank 4) |
| ピン 59 | I/O — User I/O pin (bank 4) |
| ピン 60 | I/O — User I/O pin (bank 4) |
| ピン 61 | I/O — User I/O pin (bank 4) |
| ピン 62 | VCCIO — I/O supply (2.5V or 3.3V) |
| ピン 63 | I/O — User I/O pin (bank 4) |
| ピン 64 | I/O — User I/O pin (bank 4) |
| ピン 65 | I/O — User I/O pin (bank 4) |
| ピン 66 | I/O — User I/O pin (bank 4) |
| ピン 67 | I/O — User I/O pin (bank 4) |
| ピン 68 | GND — Ground |
| ピン 69 | I/O — User I/O pin (bank 4) |
| ピン 70 | I/O — User I/O pin (bank 4) |
| ピン 71 | I/O — User I/O pin (bank 4) |
| ピン 72 | I/O — User I/O pin (bank 4) |
| ピン 73 | I/O — User I/O pin (bank 4) |
| ピン 74 | I/O — User I/O pin (bank 4) |
| ピン 75 | I/O — User I/O pin (bank 4) |
| ピン 76 | I/O — User I/O pin (bank 4) |
| ピン 77 | VCCINT — Internal core supply (3.3V) |
| ピン 78 | I/O — User I/O pin (bank 1) |
| ピン 79 | I/O — User I/O pin (bank 1) |
| ピン 80 | I/O — User I/O pin (bank 1) |
| ピン 81 | I/O — User I/O pin (bank 1) |
| ピン 82 | I/O — User I/O pin (bank 1) |
| ピン 83 | I/O — User I/O pin (bank 1) |
| ピン 84 | GND — Ground |
| ピン 85 | I/O — User I/O pin (bank 1) |
| ピン 86 | I/O — User I/O pin (bank 1) |
| ピン 87 | I/O — User I/O pin (bank 1) |
| ピン 88 | I/O — User I/O pin (bank 1) |
| ピン 89 | I/O — User I/O pin (bank 1) |
| ピン 90 | I/O — User I/O pin (bank 1) |
| ピン 91 | I/O — User I/O pin (bank 1) |
| ピン 92 | I/O — User I/O pin (bank 1) |
| ピン 93 | VCCIO — I/O supply (2.5V or 3.3V) |
| ピン 94 | OE2/GCLK2 — Output enable 2 / Global clock 2 |
| ピン 95 | INPUT/GCLK — Dedicated input / Global clock |
| ピン 96 | INPUT/OE1 — Dedicated input / Output enable 1 |
| ピン 97 | TDO — JTAG Test Data Out |
| ピン 98 | GND — Ground |
| ピン 99 | I/O — User I/O pin (bank 1) |
| ピン 100 | I/O — User I/O pin (bank 1) |
主な用途
EPM3064ATC100-7 の用途: 7 件s: Industrial Glue Logic Replacement, PCI Bus Interface / Glue Logic, Power-Up / Power-Down Sequencing Logic, Microprocessor Address Decoding and Chip-Select Generation, LED Display and Multiplexed Panel Drivers, Factory Automation Sensor Multiplexing, Legacy Peripheral Interface Bridging.
Industrial Glue Logic Replacement
The EPM3064ATC100-7 is purpose-built to replace 5-15 discrete 74-series TTL/CMOS logic ICs in industrial glue logic applications, where its 64 macrocells and 2 LABs can implement the equivalent of 200-400 discrete gates while fitting in a single 100-pin TQFP. With 7.5 ns pin-to-pin propagation delay and 135.1 MHz internal counter frequency, it comfortably handles address decoding, interrupt prioritization, and chip-select generation for legacy 8/16-bit microprocessor boards. The EEPROM-based non-volatile configuration eliminates the boot PROM required by SRAM-based FPGAs, simplifying the BOM and reducing board area. JTAG-based ISP (IEEE 1149.1) allows field upgrades without removing the chip from the board, a key requirement for factory-floor equipment that cannot easily be taken offline. The wide operating temperature range and 3.3V VCCINT with 5V-tolerant inputs make it compatible with both modern 3.3V microcontrollers and legacy 5V peripheral ICs. Industrial designers favor this part for cost-sensitive PLC I/O expansion modules, motor-control front-end logic, and sensor-signal conditioning boards.
おすすめ
PCI Bus Interface / Glue Logic
The EPM3064ATC100-7 is fully compliant with the PCI Local Bus Specification Revision 2.2 in the -7 speed grade, making it ideal for PCI add-in card glue logic including address decoding, command validation, and bus-cycle state machines. With 66 user I/Os and 7.5 ns pin-to-pin delay, the device comfortably meets PCI's 33 MHz / 66 MHz timing requirements while leaving headroom for state-machine logic. The dual VCCINT (3.3V core) and VCCIO (2.5V or 3.3V I/O) supplies allow mixed-voltage interfacing with both 5V-tolerant legacy peripherals and modern 3.3V ASICs. Designers use this CPLD to implement PCI target devices, configuration-space registers, and arbiter front-end logic without resorting to a full FPGA. The 100-pin TQFP package is the standard footprint for PCI card designs, enabling drop-in upgrades between -4, -7, and -10 speed grades. JTAG boundary-scan support (IEEE 1149.1) enables in-system test access to all pins, a critical requirement for PCI compliance testing. Designers building legacy PCI cards still in production use this part for its deterministic timing, instant-on behavior, and proven long-term reliability.
おすすめ
Power-Up / Power-Down Sequencing Logic
The EPM3064ATC100-7's EEPROM-based non-volatile configuration makes it ideal for power-sequencing applications in multi-rail systems, where the CPLD must wake up in a known state and orchestrate the startup order of DC-DC converters, ASICs, and FPGAs. The 7.5 ns pin-to-pin delay is fast enough to assert and de-assert enable signals with microsecond precision, while 64 macrocells provide sufficient logic capacity for sequencing 8-16 independent rails with adjustable delays. The 3.3V VCCINT rail can typically be powered directly from an always-on supply or a small LDO, ensuring the CPLD is the first device to come alive in the system. With 66 user I/Os, designers can wire the CPLD directly to each rail's enable pin without external buffers. The JTAG ISP interface allows firmware engineers to update sequencing order in the field without re-spinning the PCB, a major advantage over hard-wired sequencer ICs. Industrial and telecom power systems commonly use this part for ATX-style sequencing, hot-swap controller logic, and PMBus-compatible rail monitoring. The deterministic, glitch-free EEPROM configuration ensures no spurious enable signals during power transitions.
おすすめ
Microprocessor Address Decoding and Chip-Select Generation
The EPM3064ATC100-7 is a classic choice for address decoding and chip-select generation in 8/16/32-bit microprocessor systems, replacing 3-5 cascaded 74-series decoders (74HC138, 74HC139, 74HC154) with a single programmable device. With 64 macrocells and 7.5 ns pin-to-pin delay, the CPLD can decode 24-bit address buses and generate up to 16 individual chip-select outputs, each programmable with wait-state insertion and timing edges. The 66 user I/Os in the TQFP-100 package easily accommodate both wide address buses and multiple peripheral enables. Designers commonly use this part in legacy x86 embedded boards, 8051/MIPS system designs, and DSP daughter cards where deterministic chip-select timing is critical. The JTAG ISP interface enables last-minute address-map changes during prototype bring-up, eliminating the need for decoder-array rework. Combined with the EEPROM-based instant-on behavior, this part ensures peripherals are not spuriously selected during power-up - a common pitfall with discrete decoders that briefly glitch during supply ramp.
おすすめ
LED Display and Multiplexed Panel Drivers
The EPM3064ATC100-7 excels in LED display driver and multiplexed panel applications, where its 64 macrocells can implement the row/column scanning state machine, brightness PWM, and display memory addressing logic. With 135.1 MHz internal counter frequency, the device can drive multiplexed 7-segment displays, dot-matrix LED panels, and small character LCD interfaces with refresh rates well above the 60Hz flicker limit. The 66 user I/Os accommodate direct connections to 8-row by 8-column dot-matrix panels without external driver ICs in smaller designs. The 7.5 ns pin-to-pin delay ensures clean timing edges for multiplexing without ghosting or crosstalk between rows. EEPROM configuration means the display pattern, brightness curves, and scan order are retained across power cycles without external flash. Industrial control panels, point-of-sale terminals, and instrument front panels commonly use this part for its deterministic timing and ability to consolidate multiple TTL driver chips into a single programmable device.
おすすめ
Factory Automation Sensor Multiplexing
The EPM3064ATC100-7 is widely used in factory automation for sensor multiplexing and protocol bridging, where its 66 user I/Os and 7.5 ns timing can interface between industrial sensor arrays and a central PLC or controller. The device can implement custom serial protocols (RS-485, SPI, I2C, Modbus bridges), sensor de-bouncing, and time-multiplexing logic for cost-optimized analog front-ends. With 3.3V VCCINT and 5V-tolerant inputs, the CPLD easily bridges between modern 3.3V microcontrollers and 5V industrial sensor families. The wide industrial operating temperature range and robust CMOS EEPROM technology make it suitable for unattended factory-floor deployment. JTAG ISP enables firmware updates over the fieldbus without opening control cabinets, a major advantage for retrofit projects. Designers commonly use this part to consolidate 4-6 discrete protocol converter ICs into a single programmable device, reducing BOM cost and PCB area in PLC analog input modules, distributed I/O racks, and machine-vision front-end interfaces.
おすすめ
Legacy Peripheral Interface Bridging
The EPM3064ATC100-7 is an excellent choice for legacy peripheral interface bridging, where its 66 user I/Os and flexible I/O voltage standards can translate between ISA, VME, PCI, and modern serial buses. With 64 macrocells, designers can implement custom bus arbitration, interrupt steering, and protocol conversion logic without external FIFOs or bus switches in low-throughput applications. The 7.5 ns pin-to-pin delay comfortably handles 33 MHz PCI and legacy 8 MHz ISA timing requirements. JTAG boundary-scan (IEEE 1149.1) provides test access to all pins, critical for legacy board bring-up and field diagnostics. The EEPROM-based configuration retains the bridge logic during power cycles, eliminating the boot sequence issues common with SRAM-based FPGAs. Industrial test equipment, medical imaging boards, and aerospace telemetry systems still rely on this part for its deterministic timing, proven reliability, and ability to operate at 3.3V with 5V-tolerant inputs for direct interfacing with legacy peripheral ICs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPM3064ATC100-7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPM3064ATC100-4 | EPM3064ATC100-10 | LC4064ZE-7TN100C | XC9572XL-10TQG100C |
|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Lattice Semiconductor | Xilinx |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Macrocells | 64 | 64 | 64 | 64 | 72 (+12%) |
| Logic Array Blocks | 2 | 2 | 2 | 4 | 4 |
| Pin-to-Pin Delay (tPD) | 7.5 ns (-7 grade) | 4.5 ns (-4 grade) | 10 ns (-10 grade) | 7.5 ns (-7 grade) | 10 ns (-10 grade) |
| Core Supply (VCCINT) | 3.3 V | 3.3 V | 3.3 V | 1.8 V | 3.3 V |
| I/O Supply (VCCIO) | 2.5V or 3.3V (5V tol) | 2.5V or 3.3V (5V tol) | 2.5V or 3.3V (5V tol) | 1.8V / 2.5V / 3.3V | 3.3 V |
| ISP / JTAG | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) |
| Lifecycle Status | Obsolete (NRND) | Obsolete (NRND) | Obsolete (NRND) | Active | Active (mature) |
主な差別化要因
- Same Altera die, only speed grade differs （vs EPM3064ATC100-10)
- Faster Altera alternative with identical footprint （vs EPM3064ATC100-4)
- Cross-brand Lattice alternative in same package （vs LC4064ZE-7TN100C)
- Active vs obsolete lifecycle status （vs MAX V family (EPM240T100C5N))
設計ノート
The EPM3064ATC100-7 requires dual supplies: VCCINT must be held at 3.3V +/- 5% for the internal core, and VCCIO must be supplied per I/O bank requirements (2.5V or 3.3V). 5V tolerance on inputs exists but VCCIO cannot be set to 5V. Place one 0.1uF ceramic decoupling capacitor as close as possible to each VCCINT and VCCIO pin, with bulk 10-100uF tantalum or polymer caps on each supply rail. Power-up sequence is not strictly required because the EEPROM configuration is non-volatile, but for predictable JTAG ISP behavior bring up VCCINT first, then VCCIO, then drive JTAG signals.
Follow Altera's JTAG chain guidelines when multiple devices share the JTAG bus: connect TDI to TDO of the next device in series, share TMS and TCK in parallel, and place a 4.7k-10k pull-up resistor on TCK and TMS to keep the JTAG state machine in a known state during power-up. For high-speed designs (>50 MHz), keep JTAG trace lengths under 6 inches to prevent signal-integrity issues. Place the JTAG header within 2 inches of the CPLD, and route TDI/TDO away from switching power and clock signals to avoid coupling.
Common design pitfalls with the EPM3064ATC100-7: (1) Do not leave VCCIO floating - this prevents the I/O banks from driving outputs cleanly. (2) Do not use the dedicated INPUT/GCLK pin as a generic user I/O - it has special routing into the LAB clock network. (3) The -7 speed grade timing closure at 135 MHz counter frequency depends on Quartus fitter optimization; always check the timing report before sign-off. (4) For 5V input signals, the input voltage must not exceed VCCIO + 4.0V absolute maximum to avoid latch-up. (5) When migrating designs from older MAX 7000 series, note that the JTAG instruction set differs - update your BSDL file accordingly.
コンプライアンス情報
RoHS and lead-free compliant on modern shipments (EPM3064ATC100-7N suffix). Commercial operating temperature 0C to +70C; industrial-grade variant (-7I) not commonly stocked. Not AEC-Q100 qualified - not recommended for automotive safety applications.