FortiAP-432FR - Wi-Fi 6 Rugged C1D2 Outdoor AP | Fortinet
部品番号: FortiAP-432FR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
FortiAP-432FR 概要
An outdoor industrial access point is a wireless transceiver that bridges Wi-Fi client devices to a wired Ethernet backbone while surviving environmental extremes. Within the network hierarchy, it sits at the access layer, managed centrally by the integrated WLAN controller of any FortiGate security appliance or through FortiLAN Cloud provisioning. The FortiAP family (also written FortiAP FAP-series) spans indoor, outdoor, and ruggedized models; the 432FR occupies the rugged hazardous-location tier.
Key features include three radios: one 802.11b/g/n/ax 4x4 radio at 2.4 GHz, one 802.11a/n/ac/ax 4x4 radio at 5 GHz (both supporting 4 spatial streams and MU-MIMO), plus a dedicated third 802.11a/b/g/n/ac Wave 2 2x2 radio typically used for scanning, RF management, or IoT services. Integrated Bluetooth/BLE and Zigbee radios enable IoT sensor and asset-tracking deployments. Uplink connectivity is provided by one 10/100/1000/2500 Base-T RJ45 port with a secondary 10/100/1000 Base-T RJ45 port and an RJ45 console port.
Architecturally, the 432FR operates as a controlled (thin) AP under FortiGate or FortiLAN Cloud management, inheriting Fortinet Security Fabric policies, WPA3/WPA2 enterprise security, and zero-touch provisioning. External dual-band N-Type omnidirectional antennas allow operators to place antennas optimally while keeping the electronics in the protected enclosure; an integrated mounting bracket for antennas plus wall/pole mounting hardware is included.
Typical applications include hazardous-location industrial Wi-Fi (oil and gas, chemical plants, grain silos), harsh outdoor transportation and port networks, and industrial IoT backhauls carrying Zigbee and BLE sensor traffic.
A key design consideration is power: the unit supports 802.3at-class powering requirements per the Fortinet data sheet, and the operating range of -40C to +60C must be respected in enclosure and thermal planning. Verified pricing as of 2026-10-19 is not published uniformly; the 1-year FortiCare Premium Support (FC-10-FR432-247-02-12) lists at $201.00 with street pricing near $173.58.
This page synthesizes distributor listings, Fortinet documentation links, comparable model analysis, and practical deployment guidance not found in the manufacturer data sheet alone.
ドロップイン代替品: FortiAP-432FR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
FortiAP-432F
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
FortiAP-431F
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
FortiAP-433F
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
FortiAP-432FR-A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
FortiAP-432FR 仕様（メーカー公開）
| Product Type | Tri-radio outdoor industrial wireless access point |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| Radio 1 | 802.11b/g/n/ax 4x4, 2.4 GHz |
| Radio 2 | 802.11a/n/ac/ax 4x4, 5 GHz |
| Radio 3 | 802.11a/b/g/n/ac Wave 2 2x2 (dedicated scanning/IoT radio) |
| Spatial Streams | 4 (per primary radio) |
| Max Aggregate Throughput | 3.47 Gbit/s (up to 3549 Mb/s) |
| IoT Radios | Bluetooth/BLE + Zigbee |
| Uplink Port | 1x 10/100/1000/2500 Base-T RJ45 (2.5 GbE) |
| Secondary Port | 1x 10/100/1000 Base-T RJ45 |
| Console Port | RJ45 |
| Antennas | External dual-band N-Type omnidirectional (not included); integrated antenna mounting bracket included |
| Hazardous Location Certification | UL Class 1 Division 2 (C1D2) |
| Ingress Protection | IP67 |
| 動作温度 | -40C to +60C |
| Mounting | Wall/pole mount with integrated bracket |
| Management | FortiGate integrated WLAN controller or FortiLAN Cloud |
| PoE Out | 802.3af PoE-out supported (per distributor listing) |
FortiAP-432FR インターフェースとコネクタ
FortiAP-432FR は、メーカーが公開している以下のインターフェースとコネクタを備えています: ワイヤレス, 電力入力。拡張ヘッダーのピン配置、コネクタのピン番号、電気的制限はメーカーのドキュメントで定義されています。
| ワイヤレス | IEEE 802.11a/b/g/n/ac/ax (Wi-Fi 6) |
| 電力入力 | 802.3af PoE-out supported (per distributor listing) |
詳細は メーカー資料 をご参照ください（拡張ヘッダーのピン配置とコネクタのピン番号の詳細）。
電力・熱特性
| 動作温度 | -40C to +60C |
| 電力入力 | 802.3af PoE-out supported (per distributor listing) |
メーカーが公開している FortiAP-432FR の電力入力および熱パラメータ。
主な用途
FortiAP-432FR の用途: 6 件s: Oil and Gas Hazardous-Area Wi-Fi, Industrial Manufacturing and Plant Floor Coverage, Transportation and Ports Networks, Industrial IoT Sensor Backhaul, Mining and Remote Site Connectivity, Chemical and Grain Processing Facilities.
Oil and Gas Hazardous-Area Wi-Fi
The FortiAP-432FR fits oil rigs, refineries, and fuel-storage terminals because its UL Class 1 Division 2 certification legally permits installation where flammable vapors may appear under abnormal conditions, and its IP67 enclosure resists salt fog, washdown, and dust. The tri-radio Wi-Fi 6 design provides up to 3.47 Gbit/s for worker tablets, voice handsets, and video inspection cameras across 2.4 GHz and 5 GHz, while the external N-Type antennas let engineers position radiators away from process equipment. Integrated BLE and Zigbee support tank-level sensors and asset tags without extra gateways. Managed through the site FortiGate, the AP inherits segment-specific security policies, keeping OT and IT traffic separated on the same wireless fabric.
おすすめ
Industrial Manufacturing and Plant Floor Coverage
In factories and process plants, the FortiAP-432FR survives washdown, vibration, and temperature swings from -40C to +60C that would disable indoor access points. The dedicated third 802.11ac Wave 2 2x2 radio continuously scans the spectrum so the 4x4 client radios stay committed to throughput, important where AGVs, barcode scanners, and HMI panels coexist with heavy 2.4 GHz interference. Wi-Fi 6 OFDMA and MU-MIMO sustain deterministic latency for mobile HMIs, and Zigbee/BLE radios connect condition-monitoring sensors directly. Because the unit is managed by FortiGate or FortiLAN Cloud, plant IT can push SSID and firewall policy changes fleet-wide without truck rolls to the floor, reducing maintenance windows on safety-critical networks.
おすすめ
Transportation and Ports Networks
Rail yards, ports, and highway corridors demand wide-temperature outdoor Wi-Fi with flexible antenna placement; the FortiAP-432FR addresses both with its -40C to +60C rating and external dual-band N-Type omnidirectional antennas on an included mounting bracket. The 2.5 GbE uplink backhauls aggregated traffic from cranes, gate readers, and CCTV wireless bridges without the 1 GbE bottleneck of standard outdoor APs. Wi-Fi 6 4x4 MU-MIMO at up to 3549 Mb/s serves dense vehicle-mounted terminals, while PoE-out (802.3af per distributor listings) can power a nearby IP camera or sensor node from the same AP, cutting cabling runs. FortiLAN Cloud enables zero-touch provisioning at remote, unmanned sites.
おすすめ
Industrial IoT Sensor Backhaul
The FortiAP-432FR doubles as an IoT convergence point: its integrated Bluetooth/BLE and Zigbee radios terminate telemetry from asset tags, vibration sensors, gas detectors, and environmental monitors, while the Wi-Fi 6 radios and 2.5 GbE uplink transport aggregated data to plant historians. This eliminates dedicated Zigbee gateways in hazardous areas, reducing both device count and the number of C1D2-certified enclosures required. The third 2x2 radio can operate as a dedicated WIPS/scanning radio to detect rogue IoT devices, a compliance requirement in many industrial security standards. Latency for Zigbee mesh data is independent of Wi-Fi load because the radios operate on separate silicon, keeping sensor reporting deterministic even during peak WLAN usage.
おすすめ
Mining and Remote Site Connectivity
Open-pit mines and remote extraction sites combine extreme cold, dust storms, and long cable runs; the FortiAP-432FR's -40C floor and IP67 sealing directly address the first two, while FortiLAN Cloud management addresses the third by enabling zero-touch deployment of units shipped directly to site technicians. External N-Type antennas allow high-gain sector coverage along haul roads from cabinets at the pit edge. With 4x4 radios delivering up to 3.47 Gbit/s aggregate, the AP carries dispatch tablets, collision-avoidance system data, and crew Wi-Fi simultaneously. Where solar or generator power is used, the single-cable PoE installation reduces infrastructure cost versus APs needing separate power feeds in the same classified zone.
おすすめ
Chemical and Grain Processing Facilities
Chemical plants and grain-handling facilities fall under Class I and Class II hazardous classifications respectively; the FortiAP-432FR's UL Class 1 Division 2 certification and sealed IP67 chassis allow deployment in most Div 2 zones without explosion-proof enclosures, dramatically reducing installation cost compared to housing a standard AP in a purged cabinet. Corrosion-resistant construction withstands chemical atmospheres, and the tri-radio design reserves the third radio for continuous WIPS scanning required by plant cybersecurity policies. Wi-Fi 6 capacity supports mobile operator rounds, e-permit-to-work tablets, and RF-tagged equipment inspection. Integration with FortiGate Security Fabric enforces zone-based OT segmentation, ensuring wireless clients receive only the process-network access their safety case allows.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: FortiAP-432FR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | FortiAP-432FR-A | FortiAP-432F | FortiAP-431F | FortiAP-433F |
|---|---|---|---|---|---|
| Package / Form Factor | Ruggedized IP67 outdoor enclosure, C1D2 certified | Identical ruggedized C1D2 enclosure (regional SKU) | Outdoor enclosure, no C1D2 certification | Outdoor enclosure, no C1D2 certification | Outdoor enclosure, no C1D2 certification |
| Brand | Fortinet | Fortinet | Fortinet | Fortinet | Fortinet |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) | Wi-Fi 6 (802.11ax) |
| Hazardous Location Certification | UL Class 1 Division 2 | UL Class 1 Division 2 | None | None | None |
主な差別化要因
- UL Class 1 Division 2 hazardous-location certification （vs FortiAP-432F)
- Extreme temperature tolerance （vs FortiAP-432F)
- Tri-radio capacity with dedicated scan radio （vs FortiAP-431F)
- Integrated IoT radios （vs FortiAP-432F)
設計ノート
Confirm the AP power budget from the FortiAP series data sheet before selecting PoE injector or switch port class. The 2.5 GbE uplink means a multigigabit PoE switch port is ideal; a 1 GbE feed will cap backhaul below the 3.47 Gbit/s radio capability. If using the 802.3af PoE-out port for a downstream camera, subtract that device's draw from the port budget to avoid brownout at full radio load.
Use only dual-band N-Type antennas rated for the site's hazardous classification. Keep coax runs under 3 meters where possible; at 5 GHz, typical LMR-400-style cable loses roughly 0.3-0.5 dB per meter, which directly cuts EIRP and coverage. Torque N-Type connectors to specification and apply weatherproofing boots, since IP67 rating of the AP does not protect the antenna connectors themselves.
The FortiAP-432FR is a controlled AP: it requires a FortiGate WLAN controller or FortiLAN Cloud license to operate, and firmware must match the FortiOS version per the Fortinet FortiAP/FortiOS compatibility matrix. Do not deploy without ordering FortiCare support (e.g., FC-10-FR432-247-02-12) and management licensing; this is the most common ordering mistake reported by resellers.
UL Class 1 Division 2 certification applies to the AP as installed per Fortinet's mounting instructions; substituting non-certified antennas, drilling the enclosure, or bypassing the supplied mounting bracket can void the hazardous-location rating. Have your process-safety authority review the installation drawing before energizing in classified areas.
コンプライアンス情報
UL Class 1 Division 2 (C1D2) hazardous-location certified and IP67 rated per Fortinet documentation and distributor listings. RoHS/REACH status not stated in provided data.
