HSFPAR003A - Piezoresistive Force Sensor, SMD | Alps Alpine
部品番号: HSFPAR003A ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.2 | $132.00 |
| 100 | $11.85 | $1,185.00 |
| 500 | $10.4 | $5,200.00 |
| 1,000 | $9.1 | $9,100.00 |
HSFPAR003A 概要
A force sensor (also called a load cell or pressure sensor in this category) is a transducer that converts an applied mechanical force or pressure into a quantifiable electrical signal. Piezoresistive force sensors use the piezoresistive effect, where strain-induced changes in silicon resistance produce a differential voltage output proportional to applied force. Within the sensor taxonomy, the HSFPAR003A sits at: force sensor -> pressure/load sensor -> MEMS transducer -> sensor IC. It is intended for both industrial measurement and consumer-electronics integration.
Key differentiating features include the SMD mounting form factor with connector connection for system integration, the silicon-diaphragm piezoresistive bridge topology (rather than polymer or strain-gauge foil), and high linearity relative to competing polymer force-sensing technologies. The compact package enables integration into space-constrained product designs such as handheld instruments, appliance controls, and IoT edge devices where a polymer FSR would be too thick or non-linear.
Typical applications include depth-of-water detection in white goods and appliances, load/weight detection in smart kitchen scales, force feedback in game controllers and industrial HMI panels, and tactile/load sensing in robotics and medical monitoring devices. The high linearity supports direct analog read-out through an ADC, eliminating the lookup-table correction typically required for polymer FSRs.
When designing with this part, follow Alps Alpine's recommended SMD pad layout and connector-cable assembly instructions to preserve mechanical repeatability. Bridge excitation should be a low-noise regulated voltage or current source; signal conditioning with an instrumentation amplifier is recommended because the bridge output is in the millivolt range.
This page synthesizes distributor pricing, pin/connector reference, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Pricing references reflect distributor data as of 2026-10-14.
ドロップイン代替品: HSFPAR003A — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
HSFPAR001A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
HSFPAR002A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
HSFPAR004A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
HSFPAR005A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
HSFPAR003A 最大定格＆電気的特性
| センサタイプ | Force Sensor (Piezoresistive, Load / Pressure) |
| Series | HSFPAR |
| Operating Function | Load detection, Depth of water detection |
| Mounting Method | Surface Mount (SMD) with Connector connection |
| Sensing Principle | Piezoresistive bridge on silicon diaphragm |
| Linearity Characteristic | Higher linearity vs polymer FSR force sensors |
| 出力タイプ | Analog differential (bridge) |
| Package Type | SMD, Tape & Reel packaging |
| RoHS ステータス | Compliant (Alps Alpine product line policy) |
HSFPAR003A smd, tape & reel packaging ピン配置ガイド
HSFPAR003A (smd, tape & reel packaging パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: HSFPAR003A.
詳細は データシート をご参照ください。
主な用途
HSFPAR003A の用途: 6 件s: Depth of Water Detection in White Goods, Smart Kitchen and Bathroom Scales, Force Feedback in Game Controllers and HMI, Tactile Sensing in Robotics, Medical Monitoring and Diagnostic Devices, Industrial Load Monitoring and IoT Edge Sensing.
Depth of Water Detection in White Goods
The HSFPAR003A's piezoresistive silicon-diaphragm bridge delivers high-linearity load measurement required for water-depth sensing in washing machines, dishwashers, and water softeners. With the SMD-with-connector package the sensor mounts directly on the appliance control PCB and couples to a pressure port, translating hydrostatic head into a millivolt-level differential bridge output. Compared with polymer FSR water-level sensors, the HSFPAR003A provides better repeatability across fill cycles and tolerates detergent chemistry that would degrade polymer sensors.
おすすめ
Smart Kitchen and Bathroom Scales
Consumer smart scales require high-linearity force measurement in a compact form factor that can be assembled on automated SMT lines. The HSFPAR003A's SMD-with-connector packaging supports tape-and-reel pick-and-place, while the silicon-diaphragm piezoresistive bridge eliminates the lookup-table correction required by polymer FSRs. A four-sensor HSFPAR003A platform plus an instrumentation amplifier and 24-bit ADC delivers sub-gram resolution for body-weight and ingredient-scale products in the consumer/IoT domain.
おすすめ
Force Feedback in Game Controllers and HMI
Modern game controllers and industrial human-machine-interface panels need compact, repeatable force-sensing elements under thumbsticks, triggers, and panel buttons. The HSFPAR003A's small SMD footprint and high-linearity piezoresistive output make it well suited to capturing thumb pressure for adaptive triggers or panel-button force grading. Its millivolt-level bridge output feeds directly into a low-noise instrumentation amplifier and on-chip ADC, with response time tuned by the mechanical coupling rather than sensor bandwidth.
おすすめ
Tactile Sensing in Robotics
Robotic grippers, prosthetic fingertips, and tactile skins demand small, low-mass force sensors that integrate into dense arrays without cross-talk. The HSFPAR003A's compact SMD-with-connector form factor enables array mounting on flexible or rigid carriers, while the silicon piezoresistive bridge provides the high linearity needed for grasp-force control. Each sensor is read through a multiplexed instrumentation-amplifier chain feeding an ADC, giving the robot proprioceptive feedback for object handling and delicate manipulation tasks.
おすすめ
Medical Monitoring and Diagnostic Devices
Medical devices such as infusion pumps, patient weighing systems, and respiratory-pressure monitors require force sensors with high linearity, repeatability, and a clean bill-of-materials. The HSFPAR003A's silicon piezoresistive technology provides medical-grade linearity and RoHS-compliant construction, while its SMD-with-connector package simplifies sterilization-friendly assembly. When paired with a low-noise instrumentation amplifier and high-resolution ADC, the HSFPAR003A supports accurate load and pressure measurements in patient-contact medical products.
おすすめ
Industrial Load Monitoring and IoT Edge Sensing
Industrial IoT edge nodes monitor conveyor loading, hopper fill levels, and tool wear through embedded force sensors. The HSFPAR003A's SMD-with-connector package supports conformal-coated industrial assemblies, and its silicon piezoresistive bridge output feeds an ADC and a microcontroller for local decision making before backhaul. Compared to polymer FSRs, the HSFPAR003A offers better long-term stability in dusty, temperature-cycled factory environments typical of Industry 4.0 deployments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: HSFPAR003A — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | HSFPAR001A | HSFPAR002A | HSFPAR004A | HSFPAR005A |
|---|---|---|---|---|---|
| Brand | ALPS Alpine | ALPS Alpine | ALPS Alpine | ALPS Alpine | ALPS Alpine |
| Package | SMD with connector (HSFPAR series) | SMD with connector (HSFPAR series) - same | SMD with connector (HSFPAR series) - same | SMD with connector (HSFPAR series) - same | SMD with connector (HSFPAR series) - same |
| Sensing Principle | Piezoresistive silicon-diaphragm bridge | Piezoresistive silicon-diaphragm bridge | Piezoresistive silicon-diaphragm bridge | Piezoresistive silicon-diaphragm bridge | Piezoresistive silicon-diaphragm bridge |
| Series | HSFPAR | HSFPAR | HSFPAR | HSFPAR | HSFPAR |
| Force Range Suffix | 003 | 001 | 002 | 004 | 005 |
| Mounting Method | Surface mount, connector connection | Surface mount, connector connection | Surface mount, connector connection | Surface mount, connector connection | Surface mount, connector connection |
| Linearity | High (silicon piezoresistive) | High (silicon piezoresistive) | High (silicon piezoresistive) | High (silicon piezoresistive) | High (silicon piezoresistive) |
| Primary Function | Load detection / Depth of water detection | Load detection (force-range variant) | Load detection (force-range variant) | Load detection (force-range variant) | Load detection (force-range variant) |
| Unit Price (qty 1, USD, as of 2026-10-14) | $14.50 | $14.50 (estimated similar tier) | $14.50 (estimated similar tier) | $14.50 (estimated similar tier) | $14.50 (estimated similar tier) |
主な差別化要因
- Higher linearity than polymer FSR sensors （vs Generic polymer FSR (force-sensing resistor))
- SMD-with-connector package for automated assembly （vs Through-hole load cell)
- Dual function: load detection AND depth of water （vs Single-function force sensor)
設計ノート
The HSFPAR003A bridge output is in the millivolt range and is therefore highly susceptible to EMI and ground-loop noise. Route the four bridge traces as a tightly-coupled differential pair with a ground plane beneath, and place the instrumentation amplifier within 10 mm of the sensor pads. Use a buffered low-noise voltage reference for bridge excitation - the Mikroe Force 4 Click reference design demonstrates this topology.
Follow Alps Alpine's recommended SMD land pattern exactly: pad geometry, solder mask, and paste apertures are tuned for the silicon-diaphragm mechanical compliance window. Deviating from the recommended footprint can concentrate solder stress on the diaphragm and shift the bridge offset. Provide a mechanical housing or gasket that transfers applied force to the active diaphragm area, not to the package edges.
Piezoresistive silicon sensors exhibit bridge-offset drift with temperature. Implement software temperature compensation using an on-board thermistor or the MCU's internal temperature sensor, and store per-unit calibration coefficients in non-volatile memory. For high-accuracy scales or depth-of-water applications, perform a two-point calibration at the operating temperature extremes.
Estimated: applying force directly to the connector side of the HSFPAR003A - rather than the active diaphragm - will produce non-linear, low-amplitude output and may permanently damage the silicon diaphragm. Always use the Alps Alpine recommended mechanical coupling (pressure pad or pusher) that distributes load uniformly across the active area. Also avoid over-travel beyond the rated force range, which can fracture the diaphragm.
コンプライアンス情報
RoHS compliance inferred from Alps Alpine product-line policy; REACH, halogen-free, and conflict-minerals status not stated in the verified web data and require manufacturer confirmation.
