ICS348RPT - 200MHz Quad PLL Clock Synthesizer | Renesas
部品番号: ICS348RPT ✓ 生産中ICS348RPT 概要
A PLL-based clock synthesizer is a timing IC that locks an internal oscillator to an external reference and then produces one or more programmable clock outputs. This architecture allows a system designer to derive multiple related frequencies from one reference source. The ICS348RPT combines four PLL channels with field-programmability, making it suitable for systems requiring multiple independently configurable clock domains and flexible output ratios.
Key features include a 200 MHz maximum output frequency, four PLL outputs, PLL bypass capability, LVCMOS output logic, and clock or crystal input support. Its 20-terminal QSOP package measures 8.65 mm by 3.9 mm. The component uses CMOS technology, has a surface-mount mounting design, and carries a JESD-609 code of e0. Tape-and-reel packaging supports automated assembly and high-volume manufacturing.
The ICS348RPT is a clock-generation and distribution device rather than a general-purpose timing controller. Its programmable output structure can be used to establish relationships among reference, feedback, and output clocks while maintaining a single-board reference architecture. Designers should compare frequency limits, input format, output logic level, programming interface, and package details before using it in a new design.
Typical uses include communications equipment, test and measurement systems, industrial control electronics, and embedded digital platforms that need several derived clocks. In such systems, the quad architecture can reduce the number of separate oscillator and divider combinations while preserving central control of clock relationships. LVCMOS outputs are particularly useful when downstream receivers require a conventional single-ended clock interface.
A critical design consideration is signal integrity. Route clock outputs over controlled-impedance traces, provide a continuous reference plane, and keep clock circuitry away from high-current switching paths. Decoupling should be placed close to the supply pins, and unused outputs should be terminated according to the receiver and board requirements. Validate source-to-endpoint timing and jitter margins on the final layout.
This product page combines the manufacturer-level identity, confirmed package and timing characteristics, practical clock-tree design guidance, and a focused comparison of documented VersaClock family alternatives. Use the manufacturer datasheet for programming registers, electrical limits, recommended application circuits, and the authoritative pin-description table before completing a production design.
ドロップイン代替品: ICS348RPT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ICS348RPT (同一形状・フットプリント) — 相違点: Input Types, PLL Bypass, Package, Package Width, Product Type.
ICS348RP
✅ ドロップイン価格はお問い合わせください
データシートを見る →ICS348RIPT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICS348RIPLFT
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICS348RPT 仕様
| Product Type | Quad PLL field-programmable VersaClock synthesizer |
| Maximum Output Frequency | 200 MHz |
| Number of PLLs | 4 |
| PLL Bypass | Yes |
| Input Types | Clock or crystal |
| Output Logic | LVCMOS |
| Technology | CMOS |
| パッケージ | 20-pin QSOP |
| Package Type | SSOP |
| 実装タイプ | Surface mount |
| Package Length | 8.65 mm |
| Package Width | 3.9 mm |
| Number of Terminations | 20 |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Temperature | 70°C |
| Moisture Sensitivity Level | MSL 1 |
| JESD-609 Code | e0 |
| ECCN Code | EAR99 |
| RoHS ステータス | Non-RoHS Compliant |
| Pbfree Code | No |
ICS348RPT 3.9 mm ピン配置ガイド
ICS348RPT (3.9 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ICS348RPT.
詳細は データシート をご参照ください。
主な用途
ICS348RPT の用途: 6 件s: Communications Clock Tree, Industrial Control Electronics, Test and Measurement Instrumentation, Embedded Digital Platform, Data Acquisition and Conversion, Network Interface Clocking.
Communications Clock Tree
The ICS348RPT fits communications equipment that derives several related timing signals from one reference clock. Its four PLL channels and 200 MHz maximum output frequency provide a compact way to establish multiple clock domains, while clock input support allows an existing reference to be reused. LVCMOS outputs are suitable for conventional single-ended receivers when amplitude and timing requirements are met. In a practical implementation, route each output as a short controlled-impedance trace, keep a continuous return plane beneath the clock network, and verify edge rate, duty cycle, jitter, and receiver setup margin on the final board.
おすすめ
Industrial Control Electronics
ICS348RPT can support industrial control and data-acquisition equipment that requires locally generated clock signals for processors, converters, or communication transceivers. Four programmable PLL outputs allow one reference to feed several functional blocks, reducing discrete oscillator and divider combinations. The documented 0°C to 70°C operating range fits ordinary indoor industrial-envelope conditions, but extended-temperature requirements need separate qualification. Designers should reserve local filtering, provide stable supply decoupling, and isolate clock traces from motor-control switching nodes to prevent jitter coupling into the timing network.
おすすめ
Test and Measurement Instrumentation
The ICS348RPT is appropriate for test and measurement instruments that need multiple derived clocks for converters, digitizers, logic analyzers, or communication interfaces. Its quad-PLL architecture supports centralized clock management, and the 200 MHz ceiling accommodates many low-to-medium-speed acquisition and control systems. A robust implementation should use a low-noise reference, short clock traces, solid ground references, and output termination selected from the receiver characteristics. Validate both frequency accuracy and phase-noise contribution at the points where they can affect measurement resolution or instrument interoperability.
おすすめ
Embedded Digital Platform
ICS348RPT can provide programmable clocks for embedded digital platforms that coordinate processor buses, memory interfaces, serial links, and peripheral converters. A single reference distributed through four PLL outputs can simplify clock planning when multiple ratios are required. Because the device uses LVCMOS outputs, downstream devices must be checked for compatible voltage, rise time, and input capacitance. Place decoupling close to the package, preserve the recommended return path, and avoid stub-heavy test-point arrangements that degrade edge quality or create unwanted reflections.
おすすめ
Data Acquisition and Conversion
The ICS348RPT is well suited to clocking data converters and acquisition chains where multiple sampling or interface clocks must remain frequency-related. Quad PLL outputs provide flexible clock allocation, while PLL bypass offers a path for configurations that require direct reference behavior. Confirm the maximum output frequency against every converter lane or interface, and account for setup and hold requirements at the destination device. Short routes, continuous ground planes, controlled series termination where appropriate, and measured eye margins provide more reliable results than nominal frequency compatibility alone.
おすすめ
Network Interface Clocking
ICS348RPT can serve network-interface equipment that requires local generation of reference-related clocks from an established system reference. Its four independently programmable PLL channels permit several logical or physical blocks to use related timing signals, which can simplify clock-tree architecture. LVCMOS output compatibility must be confirmed at each receiver, and the clock network should remain separated from Ethernet magnetics, high-speed switching nodes, and power-converter loops. Measure jitter and phase noise at the receivers when the system depends on deterministic timing margins or maintains a high-speed data link.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ICS348RPT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ICS348RP | ICS348RIPT | ICS348RIPLFT |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-pin QSOP | 20-pin QSOP | 20-pin QSOP | 20-pin QSOP |
| Product Type | Quad PLL field-programmable VersaClock synthesizer | VersaClock synthesizer | VersaClock synthesizer | VersaClock synthesizer |
主な差別化要因
- Four PLL channels in one clock-synthesizer package (vs ICS348RP)
- Documented 200 MHz maximum output frequency (vs ICS348RIPT)
- Single clock or crystal reference with LVCMOS outputs (vs ICS348RIPLFT)
- Commercial-temperature QSOP implementation (vs ICS348RP)
設計ノート
Route every LVCMOS clock output over a continuous reference plane with a short, direct path to its receiver. Avoid test-point stubs unless their loading has been included in edge-rate and timing analysis. When traces are long or topology cannot be kept controlled, evaluate source or source-and-end termination with the actual receiver capacitance. Confirm output rise and fall times, maximum load, and duty-cycle limits against the manufacturer electrical-characteristics tables.
Place the clock synthesizer close to the reference source and the clock-consuming devices, while keeping the output network away from switch-mode power loops and high-slew-current signals. Maintain a continuous ground or reference plane beneath the QSOP and clock routes to limit radiated emissions and susceptibility. Decoupling capacitors should connect to the relevant supply and ground pins with short paths, and the exposed or routed connections must follow the package land pattern in the manufacturer drawing.
Do not treat every similarly named VersaClock suffix as interchangeable without checking the program ID, register map, input configuration, output count, electrical limits, temperature range, and package drawing. A valid drop-in decision requires the same footprint and terminal function as well as compatible operating conditions. After substituting a related family member, perform frequency, phase, jitter, and output-voltage measurements with the final reference source and receivers connected.
Clock edges can radiate harmonics even when their fundamental frequency is moderate. Keep the clock loop area small, use a solid reference plane, avoid routing beneath high-current power paths, and maintain separation from sensitive analog inputs. If radiated emissions are marginal, reduce edge speed only when timing permits, add a source termination with the correct impedance, or revise the output fanout rather than adding indiscriminate capacitance that may disturb the PLL and downstream timing.
コンプライアンス情報
The component record states Non-RoHS Compliant, Pbfree Code No, JESD-609 code e0, and EAR99. No manufacturer-authoritative REACH, halogen-free, conflict-minerals, or automotive-qualification statement is available.