ICS570BT - 170MHz Zero-Delay Clock Buffer | Renesas
部品番号: ICS570BT ✓ 生産中ICS570BT 概要
A zero-delay buffer is a clock-distribution component that reproduces an input clock at its outputs while compensating for internal propagation delay. By combining a phase-locked loop with buffer functions, the ICS570BT can support multiple logic domains that require closely related clock signals. The fanout configuration permits one input clock to be distributed to one output, while the spread-spectrum capability can reduce electromagnetic emissions in systems where controlled clock spectral shaping is useful.
The ICS570BT's key documented characteristics include a 170 MHz maximum frequency and an 8-SOIC package. Its zero-delay-buffer architecture uses proprietary analog/digital PLL techniques to control phase and timing relationships. The device is intended for synchronizing outputs in personal computers, data communications, graphics, and video systems, and its off-chip feedback paths can allow system-level timing loops to eliminate delay through other devices.
The device combines frequency multiplication and zero-delay buffering in one timing IC. This integration can reduce the number of separate clock-handling components required in a board design. The fanout architecture is particularly useful when a single high-speed reference must feed downstream digital logic, while the spread-spectrum feature provides an additional method for controlling spectral content. Designers should still evaluate loop stability, output jitter, skew, and power-supply requirements against the exact operating conditions of the target system.
Typical applications include personal-computer clock synchronization, data-communication equipment, graphics systems, video infrastructure, and other high-speed digital platforms. In these systems, the ICS570BT can provide a common clock reference while maintaining timing alignment among multiple output domains. Its 170 MHz ceiling makes it suitable for systems whose functional clock rates remain below that limit, including communications interfaces, processor support circuits, and clock-distribution networks.
When designing around the ICS570BT, preserve the recommended input, output, and decoupling connections in the manufacturer application guidance. Keep high-speed traces short, use a controlled reference plane, and place support components close to their associated pins. Because the part combines PLL and buffer functions, validate startup, feedback configuration, output phase, and system-level skew across voltage and temperature rather than assuming ideal zero-delay behavior.
This product page consolidates the verified 170 MHz frequency, one-output fanout architecture, 8-SOIC package, zero-delay-buffer function, spread-spectrum capability, sourcing links, and practical selection guidance. It also distinguishes documented facts from specifications that must be confirmed in the manufacturer datasheet before schematic release, timing validation, or production procurement.
ドロップイン代替品: ICS570BT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストICS570BT 仕様
| Product Type | Fanout distribution, spread-spectrum clock generator and zero-delay buffer |
| Maximum Frequency | 170 MHz |
| 出力数 | 1 output |
| Architecture | Multiplier and zero-delay buffer |
| PLL Technique | Proprietary analog/digital phase-locked-loop technique |
| Spread Spectrum | Supported |
| パッケージ | 8-SOIC |
| Package Width | 3.90 mm |
| 実装タイプ | Surface mount |
| Termination/Packing Code | BT ordering code |
ICS570BT 3.90 mm ピン配置ガイド
ICS570BT (3.90 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ICS570BT.
詳細は データシート をご参照ください。
主な用途
ICS570BT の用途: 6 件s: Personal Computer Clock Synchronization, Data Communication Equipment, Graphics and Video Clocking, High-Speed Digital Logic Distribution, Spread-Spectrum EMI Control, System Timing Feedback Networks.
Personal Computer Clock Synchronization
The ICS570BT is suited to synchronizing related clock outputs in personal-computer platforms because it combines a 170 MHz zero-delay buffer, spread-spectrum generation, and off-chip feedback in one 8-SOIC device. The feedback path can be incorporated into a system-level timing loop to compensate for delay elsewhere in the design, helping maintain phase alignment across processor support, memory, bus, and I/O clock domains. Engineers should use the manufacturer application guidance to establish PLL settings and connection details, then confirm startup behavior, output phase, and downstream setup-and-hold margins under the intended supply and temperature conditions.
Data Communication Equipment
The ICS570BT can provide a controlled reference clock for data-communication equipment operating below its 170 MHz maximum frequency. Its zero-delay-buffer and PLL architecture is useful when several functional blocks require closely related timing signals, while spread-spectrum operation can help shape the clock spectrum where electromagnetic-emission control is important. Suitability must be checked against the actual link rate, serializer or deserializer requirements, reference-clock tolerance, jitter budget, and board-level skew. Validate the design across supply-voltage and temperature extremes rather than relying only on nominal timing.
Graphics and Video Clocking
Graphics and video systems benefit from the ICS570BT's ability to synchronize clock outputs and use external feedback to remove system-level delay. Its 170 MHz operating ceiling accommodates clock-generation and distribution needs below that frequency, while the one-output architecture is appropriate when each supported clock domain has a dedicated buffer or distributor. The design must account for output phase, jitter, skew, and the setup and hold requirements of graphics controllers, memory interfaces, and video converters. Spread-spectrum parameters should be selected to preserve downstream clock tolerance and video timing quality.
High-Speed Digital Logic Distribution
The ICS570BT can serve as a timing source for high-speed digital logic that requires low propagation delay between the source clock and a registered destination. Its integrated zero-delay buffer and proprietary analog/digital PLL technique provide phase control, while the 170 MHz maximum frequency defines the upper documented operating class. For a processor, accelerator, interface controller, or custom ASIC, verify the required input frequency range, output phase, jitter, skew, and supply range against the manufacturer specifications. PCB construction also matters: short clock traces, a continuous return path, and close placement of decoupling components help preserve signal quality.
Spread-Spectrum EMI Control
The spread-spectrum clock-generator function in the ICS570BT can be used to shape the spectral energy of a system clock and reduce narrowband emissions. This is valuable in equipment containing high-speed processors, communications blocks, or video circuitry where uncontrolled clock harmonics can contribute to electromagnetic interference. Spread spectrum must be configured with the manufacturer's guidance and checked against every clock consumer because spectral spreading can affect jitter, edge placement, and interoperability. The one-output limit also requires a suitable distribution strategy when several domains need the same shaped clock.
System Timing Feedback Networks
The ICS570BT's off-chip feedback capability makes it applicable to system timing architectures in which propagation delay through other devices must be removed. A carefully designed feedback path can allow the PLL to correct phase relationships across local logic and board-level routes, supporting synchronized operation in computer, communications, graphics, and video equipment. Loop stability and phase margin require careful simulation or bench validation, particularly when feedback traces, connectors, or variable loading are involved. Confirm output phase and skew over the complete frequency, voltage, and temperature ranges before using the network in a production design.
エンジニアリング参考データ: ICS570BT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
設計ノート
Route the clock path as a short, controlled-impedance trace with a continuous reference plane and avoid long stubs or test-point branches near the device. Place the input, output, feedback, and decoupling connections according to the manufacturer application diagram. Good return-path continuity is especially important because the 170 MHz operating class can expose trace, connector, and package effects that are not visible in a low-frequency schematic review.
Keep the PLL feedback path short, continuous, and isolated from noisy switching nodes. The off-chip feedback option can correct system-level delay, but excessive trace length, impedance discontinuities, or coupling can alter phase behavior or reduce loop stability. Match the feedback implementation to the reference design, keep the return path intact, and validate both phase margin and startup across the intended operating range before production release.
Do not treat the term zero delay as an absolute guarantee of zero clock latency. External load, feedback-path behavior, board parasitics, and the selected PLL configuration can affect output phase and system skew. Confirm the input frequency range, supply limits, output jitter, operating temperature, and maximum clock rate in the Renesas Electronics ICS570 datasheet, then measure timing at the actual destination pins rather than inferring it from package placement.
When using spread-spectrum operation, coordinate the modulation settings with the system's EMC plan and every downstream clock consumer. Spectral shaping can reduce narrowband clock harmonics, but it may also increase edge-to-edge timing variation. Verify that spread-spectrum mode does not exceed the jitter, setup, hold, or minimum-period limits of the target logic and communications devices.
コンプライアンス情報
The available manufacturer and distributor records do not state the requested environmental and material-compliance statuses. AEC-Q100 is not applicable because ICS570BT is an integrated clock and timing circuit rather than an automotive-qualified discrete semiconductor.