ICS650R-12 MPEG Clock Synthesizer | Renesas Electronics
部品番号: ICS650R-12 ✗ 生産終了ICS650R-12 概要
A clock synthesizer is a timing IC that converts a stable reference frequency into one or more derived clock signals. Clock synthesizers and PLL-based timing devices form part of the clock and timing hierarchy within integrated circuits, where they sit between a crystal or oscillator reference and the digital logic requiring synchronized system clocks. The ICS650R-12 family is intended for system-peripheral applications, making its reference frequency, output behavior, and board footprint the principal design considerations.
Key characteristics include one clock-generation circuit, a crystal-based reference input, clock output, low-jitter operation, and a 20-pin SSOP package. Its surface-mount construction supports compact consumer and industrial equipment designs, while the specified 0°C to 70°C operating range makes it appropriate for room-temperature commercial environments. The MPEG designation identifies its intended timing role, while the PLL architecture provides frequency multiplication and clock-generation flexibility relative to a simple buffered crystal oscillator.
The ICS650R-12 is identified as an obsolete or end-of-life component. New production should therefore be approached cautiously, while existing equipment may require a form-fit-function replacement or a deliberate clock-tree redesign. Because the device is no longer active, engineers should confirm lifecycle status, electrical limits, pin mapping, crystal requirements, and output timing before committing a replacement to production.
Typical uses include MPEG decoder and encoder platforms, multimedia processing systems, digital set-top equipment, and other system-peripheral subsystems requiring a synthesized clock. In these systems, the crystal reference establishes the timing foundation while the synthesizer distributes a stable derived clock to processors, memory interfaces, converters, and other clock-consuming blocks. This integration reduces the number of separate oscillators required in a multi-clock design.
PCB implementation requires close attention to the 20-pin SSOP footprint, crystal support components, trace lengths, and grounding. Place the reference-crystal network near the device, keep clock traces short, maintain a continuous ground reference, and follow the manufacturer pin-description table when assigning every connection. Review the obsolete-part notices and cross-reference tools before redesigning around a different PLL or clock generator.
This page consolidates lifecycle information, confirmed device characteristics, practical application guidance, and verified replacement constraints. It also separates known specifications from parameters that require confirmation from the manufacturer datasheet, helping engineers make an informed sourcing or redesign decision for this legacy MPEG clock synthesizer.
ドロップイン代替品: ICS650R-12 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
ICS650R-12T
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ICS650R-12 仕様
| Product Type | MPEG clock synthesizer |
| Clock Generation Method | Analog/digital PLL techniques |
| Number of Circuits | 1 circuit |
| Reference Input | 14.31818 MHz parallel-resonant crystal |
| 出力タイプ | Clock |
| 動作温度範囲 | 0°C to 70°C |
| 実装タイプ | SMD surface mount |
| パッケージ | 20-pin SSOP |
| Jitter Performance | Low jitter |
| Cost Class | Low cost |
| Performance Class | High performance |
| Application Category | System-peripheral clock source |
| Input Clock Type | Crystal input |
ICS650R-12 20-pin ssop ピン配置ガイド
ICS650R-12 (20-pin ssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: ICS650R-12.
詳細は データシート をご参照ください。
主な用途
ICS650R-12 の用途: 6 件s: MPEG Decoder Clocking, MPEG Encoder Platform, Digital Set-Top Equipment, Multimedia Processor System, Audio and Video Interface System, Legacy System-Peripheral Timing.
MPEG Decoder Clocking
The ICS650R-12 fits an MPEG decoder timing block that requires a stable reference-derived clock rather than an independently free-running oscillator. Its 14.31818 MHz crystal input provides the frequency reference, while the analog and digital PLL architecture produces the clock used by the decoder and associated system peripherals. This arrangement supports compact SMD implementation in a 20-pin SSOP and avoids allocating a separate timing device for every subsystem. The design trade-off is that the ICS650R-12 is obsolete, so a new decoder platform should normally use an active clock generator selected from current power, output-count, jitter, and package requirements. For an existing board, preserve the crystal network and clock topology and validate startup, output phase, and downstream timing before substituting the ICS650R-12T order variant.
おすすめ
MPEG Encoder Platform
An MPEG encoder platform can use the ICS650R-12 as a central system-peripheral clock source for processor, memory, and data-conversion timing. The low-jitter PLL-based architecture derives synchronized clock signals from the specified 14.31818 MHz parallel-resonant crystal, reducing the number of independent oscillators in a multi-domain multimedia board. Its surface-mount 20-pin SSOP package supports compact assembly, while the 0°C to 70°C range fits controlled indoor equipment. Because the ICS650R-12 is obsolete, engineers should qualify any continuation for production availability and confirm all timing margins against the original design. The ICS650R-12T can serve as an order-form alternative when the underlying die, electrical configuration, and package match have been confirmed.
おすすめ
Digital Set-Top Equipment
The ICS650R-12 is appropriate for the clock subsystem of a legacy digital set-top receiver that uses MPEG decoding and multiple peripheral blocks. A crystal-locked PLL provides a consistent timing reference, while the low-jitter architecture helps maintain reliable coordination among video processing, memory, and communications circuitry. Its 20-pin SSOP footprint suits compact consumer-electronics construction, and the specified 0°C to 70°C operating range matches many indoor environments. For a replacement project, compare clock amplitude, supply voltage, PLL lock behavior, output count, and exact pin mapping with the original schematic. The obsolete lifecycle status means that new production should include a second-source or redesign plan rather than relying on a single legacy clock source.
おすすめ
Multimedia Processor System
The ICS650R-12 can support a multimedia processor system where several functional blocks require clocks derived from one stable reference. The 14.31818 MHz crystal reference and PLL architecture provide a common timing origin, helping reduce clock drift and inter-domain synchronization complexity compared with several unrelated oscillators. The device's single-circuit implementation and compact SSOP package make it suitable for established SMD boards, while its low-jitter specification is relevant to video, audio, and data-transfer pipelines. When designing around the part, route the crystal and PLL loop with short, controlled traces and provide a continuous ground reference. For new systems, compare the obsolete ICS650R-12 against current clock generators based on output count, supply range, jitter, RMS jitter, and power before committing the architecture.
おすすめ
Audio and Video Interface System
The ICS650R-12 can supply a common clock reference for a legacy audio and video interface subsystem that includes converters and communication controllers. Centralizing clock generation in a PLL-based synthesizer supports repeatable operation of the multimedia pipeline, and the specified low-jitter performance is valuable where audio, video, and control traffic share a board. The 20-pin SSOP package reduces board area compared with many discrete oscillator arrangements. A practical implementation should isolate sensitive analog and digital sections, keep the crystal loop compact, and confirm that downstream devices accept the generated clock amplitude and frequency. For an active-design alternative, current clock ICs should be selected only after checking jitter, supply voltage, output topology, and whether the original 20-pin footprint can be retained.
おすすめ
Legacy System-Peripheral Timing
The ICS650R-12 was designed specifically for system-peripheral clock generation, making it suitable for maintaining a legacy control, memory, and interface timing section. Its single PLL circuit can provide a shared clock to multiple peripheral blocks while the external 14.31818 MHz crystal establishes the reference. The SMD package and low-cost positioning support repair and continuation programs where changing the board architecture would be expensive. Replacement engineering should begin with a complete pinout comparison, then verify supply sequencing, crystal startup margin, output frequency, duty cycle, and downstream tolerances under temperature. The ICS650R-12T may support assembly continuity if its order suffix is confirmed to have identical electrical characteristics. For higher-volume new equipment, a redesign to an active PLL or clock generator offers better supply assurance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ICS650R-12 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ICS650R-12T |
|---|---|---|
| Package | 20-pin SSOP | 20-pin SSOP |
| Brand | Renesas Electronics | Renesas Electronics |
| Device Type | MPEG clock synthesizer | MPEG clock synthesizer |
| Clock Architecture | Analog/digital PLL techniques | Analog/digital PLL techniques |
| Reference Input | 14.31818 MHz parallel-resonant crystal | 14.31818 MHz parallel-resonant crystal |
| Number of Circuits | 1 circuit | 1 circuit |
| Operating Temperature | 0°C to 70°C | 0°C to 70°C |
| Mounting Type | SMD surface mount | SMD surface mount |
| Output Type | Clock | Clock |
| Lifecycle Status | Obsolete | Obsolete |
主な差別化要因
- Directly retains the legacy MPEG clock-synthesizer architecture (vs ICS650R-12T)
- Preserves the established 14.31818 MHz reference architecture (vs ICS650R-12T)
- Maintains the confirmed 20-pin SSOP footprint and temperature range (vs ICS650R-12T)
設計ノート
Keep the reference crystal, load-capacitor network, and oscillator path close to the ICS650R-12 pins. Use the manufacturer application circuit and pin-description table to determine grounding and component placement. Avoid routing the crystal traces beneath digital clock lines or across plane splits, because leakage and crosstalk can reduce startup margin. Maintain a continuous ground reference beneath the timing section and verify the final layout against the datasheet reference design.
Treat every clock output as a high-speed timing signal even though the ICS650R-12 is intended for low-jitter system-peripheral use. Route outputs as short, direct traces with uninterrupted reference planes, avoid unnecessary stubs, and provide suitable source and load termination based on the output specification. Confirm rise time, duty-cycle limits, load capacitance, and downstream input thresholds before allowing a clock to drive a long bus or multiple unbuffered loads.
Do not substitute the ICS650R-12 solely because another PLL clock generator has the same nominal output frequency. Compare the complete pin map, supply voltage, crystal oscillator topology, load capacitance, PLL configuration, output amplitude, clock count, and package dimensions. The obsolete lifecycle status also makes continuation planning important: secure a controlled supply, define incoming inspection criteria, and qualify a second source or redesign before using the device in a long-lived production program.
コンプライアンス情報
The obsolete legacy-clock status is confirmed, but no definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN.