IRS20955STRPBF - 2-Channel Audio Line Driver | Infineon
部品番号: IRS20955STRPBF ✗ 生産終了IRS20955STRPBF 概要
ドロップイン代替品: IRS20955STRPBF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: IRS20955STRPBF （同一形状・フットプリント） — 相違点: Output Current, Over-Current Protection, Device Type, Manufacturer, Supply Voltage.
IRS20953
✅ ドロップイン📋 参考代替品（カタログ未掲載）
IRS20956
✅ ドロップイン📋 参考代替品（カタログ未掲載）
IRS20957SPBF
✅ ドロップイン価格はお問い合わせください
データシートを見る →IRS20955SPBF
✅ ドロップイン価格はお問い合わせください
データシートを見る →IRS20955SPBF
✅ ドロップイン価格はお問い合わせください
データシートを見る →IRS20955STRPBF 最大定格＆電気的特性
| Device Type | Audio line driver and peripheral driver |
| Channel Count | 2 channels |
| 電源電圧 | 12 V |
| 動作温度 | -40 C to +125 C |
| Package Type | SOIC-16 |
| Package Outline | MS-012AC |
| ピン数 | 16 pins |
| 実装タイプ | Surface mount |
| Output Power | 120 W x 2 channels |
| Rated Output Voltage | 100 V |
| Output Current | 1.2 A |
| 出力構成 | Two-output high-side/low-side half-bridge driver |
| PWM Input | Floating PWM input |
| Over-Current Protection | Programmable bidirectional over-current protection with self-reset |
| Preset Function | Programmable preset |
| RoHS ステータス | RoHS compliant |
| Manufacturer | International Rectifier, acquired by Infineon Technologies |
IRS20955STRPBF ms-012ac ピン配置ガイド
IRS20955STRPBF (ms-012ac パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: IRS20955STRPBF.
詳細は データシート をご参照ください。
主な用途
IRS20955STRPBF の用途: 6 件s: Class D stereo audio amplifier, Portable powered speaker, Multichannel home audio amplifier, Automotive audio amplifier, Industrial audio control amplifier, Professional audio output stage.
Class D stereo audio amplifier
IRS20955STRPBF fits a two-channel Class D audio amplifier because the verified family description identifies it as a 120 W x 2-channel driver. Its floating PWM input supports implementation with the appropriate external half-bridge power stage, while programmable bidirectional over-current protection with self-reset adds a useful protection function near the output transistors. The 16-pin SOIC-16 package is suitable for compact audio equipment. Exact gate-drive timing, dead time, current thresholds, and external MOSFET selection must come from the manufacturer datasheet and application circuit before production use.
おすすめ
Portable powered speaker
IRS20955STRPBF can serve as the gate-driver control device in a portable speaker design requiring two amplified channels. The verified operating-temperature range of -40 C to +125 C gives the device broad industrial temperature capability, while its 2-channel organization simplifies control of left and right outputs. The floating PWM input is useful when the amplifier architecture permits external gate-drive circuitry. Designers should account for supply limitations, external MOSFET dissipation, copper heat spreading, and the verified 1.2 A output listing in the final power-stage design.
おすすめ
Multichannel home audio amplifier
IRS20955STRPBF is appropriate for multichannel home-audio power stages that use two independent Class D outputs per device. Its verified two-channel architecture permits multiple packages to drive left, right, center, and surround channels, while the programmable preset and bidirectional over-current functions provide configurable output-stage behavior. The SOIC-16 package simplifies assembly relative to larger power packages, but it does not dissipate the power-transistor losses itself. Keep MOSFETs, gate drivers, and heat sinks thermally separate from the logic circuitry.
おすすめ
Automotive audio amplifier
IRS20955STRPBF can be evaluated for automotive audio systems because a verified component listing identifies the temperature grade as automotive and specifies operation from -40 C to +125 C. Its two-channel driver arrangement and programmable over-current protection are relevant to vehicle audio power stages, where fault handling and wide temperature operation are important. However, the retrieved data does not explicitly state AEC-Q100 qualification, so automotive production use requires obtaining the current Infineon qualification statement and confirming all AEC-Q100 requirements.
おすすめ
Industrial audio control amplifier
IRS20955STRPBF can support industrial audio equipment that requires dual PWM-driven outputs and integrated protection logic. The verified operating range of -40 C to +125 C supports designs exposed to a broad industrial ambient range, and the programmable bidirectional over-current protection with self-reset is useful for controlled output-stage recovery after a fault. The SOIC-16 device should be paired with suitably rated external power transistors and an appropriate thermal strategy. Industrial qualification status beyond the listed temperature range remains [DATA_NEEDED].
おすすめ
Professional audio output stage
IRS20955STRPBF is suitable for professional audio output stages built around external MOSFET half-bridges, particularly where two-channel control and programmable protection simplify the driver architecture. The verified IRS20955 family rating of 120 W x 2 channels indicates the intended class of power-amplifier application, while the floating PWM input provides a defined control interface for the external stage. Validate total harmonic distortion, output-current margin, protection timing, and thermal performance in the complete amplifier because those system-level results are not included in the retrieved snippets.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: IRS20955STRPBF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | IRS20953 | IRS20956 | IRS20957 | IRS20955 | IRS20955S |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
主な差別化要因
- Two-channel integration reduces separate driver count （vs IRS20955)
- Integrated bidirectional over-current protection （vs IRS20953)
- Floating PWM input simplifies half-bridge implementation （vs IRS20956)
- Wide operating temperature range （vs IRS20957)
設計ノート
Design the IRS20955STRPBF supply and gate-drive paths around the external MOSFET power stage rather than treating the 1.2 A output listing as a complete amplifier-current specification. Confirm the device's absolute maximum ratings, quiescent current, undervoltage behavior, and gate-drive voltage in the current manufacturer datasheet. Use the floating PWM input with suitable gate resistors and local decoupling, and verify dead time across the complete switching cycle.
Place the driver close to the external power transistors while keeping the SOIC-16 thermal path unobstructed on the PCB. Most amplifier heat is generated in the MOSFETs, so provide copper spreading, a suitable heatsink, and planned airflow according to the actual output power. Use the manufacturer thermal data to calculate junction temperature; the retrieved excerpts do not provide a verified SOA curve or junction-to-ambient resistance.
Route PWM and gate-drive traces as short, impedance-controlled paths, and keep switching-node copper away from the floating PWM input and programming networks. Use a solid ground plane, place input and bypass capacitors at their associated pins, and provide a low-impedance return for each half-bridge. Verify dead time, ringing, channel crosstalk, and output distortion with oscilloscope measurements before production release.
Do not infer that the family relationship alone guarantees a drop-in substitution. Verify the SOIC-16 pin functions, PWM polarity, fault timing, current thresholds, voltage ratings, and external component values for each IRS20953, IRS20956, IRS20957, IRS20955, or IRS20955S candidate. Also confirm whether the design requires the verified programmable bidirectional over-current protection with self-reset behavior.
コンプライアンス情報
RoHS compliance is stated in the verified technical listing. A component listing identifies the temperature grade as automotive, but explicit AEC-Q100 qualification was not present in the supplied data.
