ISL26312FVZ-T7A - 12-bit 125kSPS Dual-Channel SAR ADC | Renesas
部品番号: ISL26312FVZ-T7A ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.95 | $5.95 |
| 10 | $5.4 | $54.00 |
| 100 | $4.62 | $462.00 |
| 500 | $4.05 | $2,025.00 |
| 1,000 | $3.55 | $3,550.00 |
ISL26312FVZ-T7A 概要
A SAR ADC is a type of data converter that compares the sampled input voltage against a precision DAC one bit at a time over successive clock cycles, achieving deterministic latency and excellent DC accuracy at moderate sampling rates. SAR converters sit in the broader hierarchy: data converter -> ADC -> SAR ADC -> precision acquisition IC -> mixed-signal semiconductor. They are preferred over delta-sigma or pipeline ADCs whenever multiplexed multi-channel inputs, low power, simple SPI/QSPI/MICROWIRE digital interfaces, and excellent AC performance are needed in industrial instrumentation.
Key features of the ISL26312FVZ-T7A include 12-bit resolution, 125 kSPS throughput, two differential input channels (selectable from up to four single-ended or two differential inputs through an internal analog multiplexer), an SPI/QSPI/MICROWIRE-compatible serial interface, and a wide 2.7 V to 5.25 V analog supply range that supports single-supply 3.3 V or 5 V rails.
Technical depth comes from the proprietary input multiplexer with an integrated input buffer amplifier, which reduces input drive requirements and minimizes channel-to-channel crosstalk. The device draws microamp-level supply current at lower sample rates, and offers a hardware power-down pin for battery-sensitive applications. Linearity is maintained across the industrial -40 C to +125 C temperature range, supported by a built-in track/hold and a robust internal reference option.
Typical applications include industrial process control loops, multi-channel data-acquisition front-ends, isolated sensor signal chains, PLC analog input modules, and battery-powered instrument clusters where the combination of low power draw and clean 12-bit DC performance yields high measurement integrity.
When designing with this part, place a 10 nF ceramic decoupling capacitor directly at the AVDD pin and a 1 uF bypass at DVDD to keep the SAR comparator noise floor low. The REFIN/REFOUT pin accepts either an external reference or uses the internal 2.5 V reference - drive REFOUT with a low-ESR 10 uF ceramic for best AC performance.
This page synthesizes distributor pricing, drop-in alternatives within the ISL26310/11/12/13/14/15/19 family, and practical design notes not collected in the manufacturer datasheet alone.
ドロップイン代替品: ISL26312FVZ-T7A — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ISL26312FVZ-T7A （同一形状・フットプリント） — 相違点: Package, Input Configuration, Resolution, ADC Architecture, Digital Interface.
クイック比較ツール — 並列比較する代替部品を選択:
ISL26310FVZ-T7A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL26313FVZ-T7A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL26314FVZ-T7A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL26311FVZ-T7A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL26315FVZ-T7A
✅ ドロップイン✓ 在庫あり
$2.52 / 個
データシートを見る →ISL26319FVZ-T7A
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL26312FVZ-T7A 最大定格＆電気的特性
| Part Number | ISL26312FVZ-T7A |
| 分解能 | 12 bit |
| サンプリングレート | 125 kSPS |
| Number of Inputs | 2 differential (MUX-up to 4 single-ended / 2 differential) |
| Converter Architecture | SAR (Successive Approximation Register) |
| Input Configuration | Single-ended and differential inputs |
| Analog Supply Voltage | 2.7 V to 5.25 V |
| Digital Supply Voltage | 2.7 V to 5.25 V |
| DNL | 0.7 LSB (typ) |
| 基準電圧 | Internal 2.5 V or external |
| Digital Interface | SPI / QSPI / MICROWIRE-compatible serial |
| 動作温度 | -40 C to +125 C |
| パッケージ | 16-pin TSSOP |
| 実装タイプ | Surface Mount |
| Shipping Carrier | Tape & Reel, 7-inch (T7A suffix) |
| RoHS ステータス | Compliant |
| HSUSA Code | 8542390000 |
ISL26312FVZ-T7A ピン構成
| ピン 1 | AVDD — Analog supply voltage (2.7 V to 5.25 V) |
| ピン 2 | REFIO — Reference input/output (internal 2.5 V or external) |
| ピン 3 | IN0+ — Differential positive input channel 0 |
| ピン 4 | IN0- — Differential negative input channel 0 |
| ピン 5 | IN1+ — Differential positive input channel 1 |
| ピン 6 | IN1- — Differential negative input channel 1 |
| ピン 7 | GND — Analog ground |
| ピン 8 | /CS — Active-low chip select (SPI) |
| ピン 9 | SCLK — Serial clock input (SPI) |
| ピン 10 | DOUT/DRDY — Serial data output / data ready |
| ピン 11 | DIN — Serial data input (SPI) |
| ピン 12 | /PD — Active-low power-down input |
| ピン 13 | DVDD — Digital supply voltage |
| ピン 14 | DGND — Digital ground |
| ピン 15 | /RESET — Active-low reset input |
| ピン 16 | NC — Not connected (per datasheet) |
主な用途
ISL26312FVZ-T7A の用途: 6 件s: Industrial Process Control Data Acquisition, Multi-Channel Sensor Signal Chain, Programmable Logic Controller (PLC) Analog Input Modules, Battery-Powered Field Instrumentation, Medical Patient Monitoring Sensors, Factory Automation Encoder and Vibration Monitoring.
Industrial Process Control Data Acquisition
The ISL26312FVZ-T7A suits multi-loop industrial process control boards where 2 differential channels digitize 4-20 mA sensor outputs after precision current-sense amplification. Its 125 kSPS throughput oversamples the slowly varying process variables (typically <100 Hz of interest) by a factor of 1000 or more, supporting digital averaging to effective >14-bit resolution in firmware. The internal input buffer amplifier minimizes cross-talk between adjacent channels, while the 2.7 V to 5.25 V supply range lets the part sit on a 24-V-rail-derived isolated 5 V supply without an extra LDO. Using a 10 nF AVDD bypass ceramic and a 1 uF REFOUT capacitor, the SAR noise floor is held low enough to resolve 12-bit codes at full speed.
おすすめ
Multi-Channel Sensor Signal Chain
For bridge-type pressure, strain-gauge, and thermocouple front-ends, the ISL26312FVZ-T7A digitizes differential sensor outputs directly without an external instrumentation amplifier in many cases. The proprietary input buffer reduces drive requirements to <1 kohm source impedance, letting the SAR ADC settle to 12-bit accuracy within the acquisition window. Multi-channel thermistor or RTD boards benefit from the wide -40 C to +125 C operating range matching industrial environmental requirements. The internal 2.5 V reference is ratiometric to sensor excitation, while the low power consumption (~1.5 mA at 125 kSPS) supports handheld or battery-backed measurement systems.
おすすめ
Programmable Logic Controller (PLC) Analog Input Modules
PLC analog input modules require a multi-channel 12-bit ADC with deterministic latency and robust isolation. The ISL26312FVZ-T7A provides two differential channels per chip, allowing PLC designers to scale channel count by paralleling the part on a common SPI bus tied to the MCU. The SAR architecture's single-cycle conversion gives fixed, predictable latency across all inputs - critical for closed-loop PLC control. The wide 2.7 V to 5.25 V supply lets the chip share a 5 V or 3.3 V backplane, and the 16-pin TSSOP footprint supports 24-ch density on a typical 100x100 mm industrial module.
おすすめ
Battery-Powered Field Instrumentation
Portable handheld instruments, wireless sensor nodes, and remote monitoring devices benefit from the ISL26312FVZ-T7A's low power draw and hardware power-down pin. The /PD pin can reduce supply current to microamp-level standby between scans, extending battery life significantly when duty-cycling measurements every few seconds. The wide supply voltage lets the part run directly from a lithium 3.6 V cell after a simple boost converter, eliminating the need for an additional LDO. Its 125 kSPS throughput can be dialed down via the SCLK rate to consume even less current at lower scan rates, making it a flexible choice for power-budgeted designs.
おすすめ
Medical Patient Monitoring Sensors
Low-power multi-channel patient-monitoring peripherals (e.g. temperature, SpO2 front-ends, respiration) benefit from the ISL26312FVZ-T7A's combination of 12-bit resolution, low power consumption, and ability to operate over the industrial -40 C to +125 C range. The two differential channels can digitize a temperature sensor pair (thermistor bridge) and a SpO2 photodiode channel simultaneously, while the SPI interface lets the host microcontroller enter sleep between conversions. The small 16-pin TSSOP package supports wearable form factors, and the SAR architecture's deterministic conversion latency is critical when one ADC channel is shared between timing-critical and best-effort measurements.
おすすめ
Factory Automation Encoder and Vibration Monitoring
Predictive-maintenance vibration analyzers and factory-automation encoder readers need a SAR ADC that captures fast transients without aliasing while remaining power-efficient. The ISL26312FVZ-T7A's 125 kSPS is comfortable for vibration bands up to 50 kHz at 2.5x oversampling, allowing capture of bearing-fault signatures. The SPI/QSPI/MICROWIRE-compatible serial interface fits direct connection to DSPs and industrial motor-control MCUs. The differential input capability rejects common-mode noise from long motor-cable runs, and the wide temperature grade suits encoder boxes mounted near drive cabinets.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ISL26312FVZ-T7A — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ISL26310FVZ-T7A | ISL26313FVZ-T7A | ISL26314FVZ-T7A | ISL26311FVZ-T7A |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 125 kSPS | 125 kSPS | 125 kSPS | 125 kSPS | 125 kSPS |
| Number of Inputs | 2 differential / 4 SE | 1 differential / 2 SE | 4 differential / 8 SE | 4 differential / 8 SE | 1 differential / 2 SE |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V | 2.7 V to 5.25 V |
| Digital Interface | SPI/QSPI/MICROWIRE | SPI/QSPI/MICROWIRE | SPI/QSPI/MICROWIRE | SPI/QSPI/MICROWIRE | SPI/QSPI/MICROWIRE |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
主な差別化要因
- 2 differential / 4 SE multiplexer inputs in a 16-pin TSSOP footprint （vs ISL26310FVZ-T7A)
- Lower channel overhead than ISL26313 for cost-sensitive designs （vs ISL26313FVZ-T7A)
- Fully pin-compatible family scalability from 1 to 8 channels （vs ISL26310/11/13/14/15/19 family)
設計ノート
Decouple the AVDD pin with a 10 nF X7R ceramic placed within 3 mm of the package pin, and add a 1 uF bulk capacitor at the PCB power-entry node. DVDD should be tied to the same rail or a separate 1.8 V logic supply, decoupled with a 100 nF plus 4.7 uF pair. The internal 2.5 V reference is bypassed on the REFOUT/REFIO pin with a 1 uF to 10 uF low-ESR ceramic, sized to damp the SAR comparator's transient charging pulses at 125 kSPS.
Do not leave the IN- pins floating when running single-ended measurements - tie them directly to analog ground to avoid channel-to-channel leakage paths that manifest as ~3 LSB offset drift with temperature. Pull /CS high between transactions to avoid spurious noise injection. The /PD pin must be brought high within 100 us of power-on to allow the internal bias network to settle before issuing the first conversion command.
Route the analog input traces as differential pairs with matched 50 ohm impedance when possible, keeping them short and away from switching regulator or digital clock traces. Pour an analog ground plane underneath the ADC and stitch it to the digital ground at a single point near the power-entry node. Avoid running SCLK or DOUT parallel to any analog input for more than a few millimeters to prevent digital-coupling artifacts at the 12-bit quantize level.
コンプライアンス情報
RoHS compliant per Renesas product page. Not AEC-Q100 qualified (industrial grade, not automotive). HSUSA export code 8542390000 per Jotrin datasheet listing.