LFE2-20E-5F484C - 21K LUT FPGA, 331 I/O | Lattice
部品番号: LFE2-20E-5F484C ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
LFE2-20E-5F484C 概要
An FPGA is a programmable semiconductor whose lookup tables, registers, interconnect, and dedicated blocks can be configured after manufacture. The LFE2-20E-5F484C belongs to the ECP2 FPGA family and provides a hardware platform for parallel logic, state machines, interfaces, control logic, and DSP pipelines. Its 331 I/O make the package especially useful when the design requires substantial external connectivity.
The supplied distributor information identifies the device as an ECP2 FPGA with 21K LUTs, 331 I/O, DSP support, 1.2 V operation, and a -5 speed designation. The package is identified as 484-BBGA. Detailed timing, memory, configuration, electrical, and temperature data are not present in the supplied source excerpts, so those values are not asserted here. The design should be checked against the manufacturer datasheet before layout, power budgeting, or production qualification.
A -5 FPGA speed designation indicates the manufacturer’s speed-grade family, but the operating-temperature grade and timing margins are not stated in the verified excerpts. The 1.2 V core supply is the confirmed supply value, while external I/O supply requirements, configuration voltage, and power consumption require the full manufacturer documentation. The 484-BBGA package requires a PCB footprint and thermal design appropriate for a large fine-pitch BGA.
Typical design uses include industrial automation, communications equipment, video and image processing, embedded control, and general-purpose programmable logic. The large I/O count can support external memory, parallel buses, sensor interfaces, transceiver connections, and control peripherals. DSP capability can reduce external processing hardware when the design uses fixed-point or parallel signal-processing functions implemented within the FPGA.
For a new PCB, preserve the exact Lattice package pinout and ball assignment, define clean power and ground planes, and validate high-speed routing with the complete timing and pinout documentation. Do not treat distributor snippets as a substitute for the manufacturer datasheet. This page consolidates the verified distributor identity, package, density, I/O, voltage, and sourcing information while explicitly separating unknown technical details.
The practical advantage of this part is its combination of moderate FPGA logic density, extensive I/O, DSP support, and a 1.2 V core architecture. It is more suitable than a small logic device when a design needs substantial parallel connectivity, while the -5 grade should be selected only after confirming timing requirements against the complete Lattice documentation.
ドロップイン代替品: LFE2-20E-5F484C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
LFE2-20E-5F484I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LFE2-20E-5FN484C
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LFEC20E-5F484C
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LFE2M20SE-5F484C
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LFE2-20E-5F484C
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →LFE2-20E-5F484C 最大定格＆電気的特性
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Cell Density | 21K LUTs |
| Input/Output Count | 331 I/O |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -5 |
| DSP Capability | DSP |
| パッケージ | 484-BBGA |
| Package Type | BGA |
| Terminal Count | 484 balls |
| 実装タイプ | Surface Mount |
| Programmable Device | Yes |
| FPGA Family | LatticeECP2 |
| Logic Technology | 90 nm CMOS |
LFE2-20E-5F484C bga ピン配置ガイド
LFE2-20E-5F484C (bga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LFE2-20E-5F484C.
詳細は データシート をご参照ください。
主な用途
LFE2-20E-5F484C の用途: 6 件s: Industrial Automation Control, Communications and Network Interface, Video and Image Processing, Embedded Control and Data Acquisition, DSP Accelerator and Signal Processing, Test and Measurement Equipment.
Industrial Automation Control
LFE2-20E-5F484C fits industrial automation designs that combine parallel control logic with numerous external fieldbus, sensor, actuator, and machine-interface signals. Its verified 21K LUT capacity provides substantial programmable logic for sequencing, state machines, interlocks, and diagnostics, while 331 I/O can reduce the need for external interface expansion. The 484-BBGA package also provides a high pin count for routed control buses and dedicated peripheral connections. Before release, verify timing margins, I/O standards, power rails, and the exact pin map in the Lattice documentation.
おすすめ
Communications and Network Interface
The ECP2 FPGA architecture of LFE2-20E-5F484C is suitable for communications equipment requiring parallel packet handling, fixed-function protocol logic, and flexible I/O allocation. The 21K LUT figure supports moderate protocol processing and control functions, while the 331 I/O count can accommodate data buses, control signals, and multiple external interfaces. The -5 speed designation should be validated against the required clock rate using the complete family timing data. Confirm the FPGA’s supported I/O standards, configuration method, and signal-integrity requirements before layout.
おすすめ
Video and Image Processing
LFE2-20E-5F484C can serve as a programmable front end for image and video systems that require parallel pixel, timing, control, and data-processing logic. Its 21K LUTs and DSP capability are useful for deterministic filtering, feature extraction, color processing, or test-pattern generation, while 331 I/O provides connectivity to sensors, memory, serializers, and display controllers. The exact supported I/O voltage, memory interface, and maximum video timing must be verified in the manufacturer datasheet. The 484-BBGA footprint requires careful ball-escape and signal-integrity planning.
おすすめ
Embedded Control and Data Acquisition
The LFE2-20E-5F484C is appropriate for embedded control systems that require deterministic hardware logic alongside sensor acquisition and actuator control. A design can use LUTs and registers for timing, filtering, sequencing, and protocol handling, while DSP blocks can accelerate fixed-point arithmetic. The 331 I/O figure allows direct connection to multiple sensors, switches, memories, and converters, reducing external glue logic when pin resources are carefully assigned. Verify electrical limits, configuration storage, clocking, and power sequencing in the full manufacturer documentation.
おすすめ
DSP Accelerator and Signal Processing
The verified DSP capability of LFE2-20E-5F484C makes it useful for fixed-point filtering, waveform generation, correlation, and parallel signal-processing pipelines. The 21K LUT capacity allows surrounding control, addressing, and data-format logic to be integrated with the DSP blocks, reducing the need for separate programmable logic in suitable designs. Performance depends on the exact DSP architecture, clocking, memory resources, and speed grade, which are not supplied in the excerpts. Confirm those details and the I/O budget before committing to the device.
おすすめ
Test and Measurement Equipment
LFE2-20E-5F484C can support programmable test and measurement systems that coordinate sequencing, acquisition, pattern generation, and result analysis. Its 331 I/O can connect test fixtures, status signals, clocks, memories, and communication ports, while 21K LUTs support timing and control logic around the DSP resources. The large 484-BBGA package demands careful thermal, power, and escape-routing design. Timing margins, I/O standards, and any high-speed interface requirements must be validated with the complete Lattice documentation before production.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LFE2-20E-5F484C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LFE2-20E-5F484I | LFE2-20E-5FN484C | LFEC20E-5F484C | LFE2M20SE-5F484C | LFE2-20E-5F484C |
|---|---|---|---|---|---|---|
| Package | 484-BBGA | 484-BBGA family candidate | 484-BBGA | 484-BBGA family candidate | 484-BBGA family candidate | 484-BBGA |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
主な差別化要因
- High verified I/O availability for parallel systems （vs LFE2-20E-5F484I)
- DSP capability is explicitly identified for the target （vs LFEC20E-5F484C)
- Confirmed core supply and speed designation （vs LFE2M20SE-5F484C)
設計ノート
Start the layout by obtaining the manufacturer’s exact 484-BBGA ball map, land pattern, and escape-routing guidance. Reserve continuous power and ground planes, place decoupling close to the relevant supply balls, and route high-speed signals with controlled impedance. Because the verified data confirms the package and ball count but not the full pinout or stack-up requirements, do not finalize the PCB footprint from distributor summaries alone.
Build the power tree around the verified 1.2 V core requirement, then confirm every auxiliary and I/O supply from the complete Lattice datasheet. Separate noisy digital activity from sensitive analog or external interface sections where practical, and validate power sequencing against configuration requirements. The supplied excerpts do not state current consumption, tolerance, startup behavior, or decoupling values, so those values must not be guessed.
A 484-BBGA design requires disciplined escape routing and signal-integrity planning. Keep clock and configuration paths short, avoid routing high-speed signals through power-plane splits, and use the manufacturer’s recommended ball assignments and I/O standards. Establish a timing-closure plan around the -5 speed designation and the actual clock targets. The verified excerpts do not provide maximum frequency or I/O timing values, so validation must use the complete family documentation.
Do not substitute a related Lattice MPN solely because it has a similar 484-BBGA package. Confirm logic resources, I/O count, voltage rails, speed grade, temperature grade, configuration method, memory resources, and qualification. The cross-reference results name several candidates, but search snippets are not proof of drop-in equivalence. Verify the exact ordering table and pin map before releasing a replacement or respin.
コンプライアンス情報
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, conflict-mineral, or automotive qualification status for LFE2-20E-5F484C. AEC-Q100 is recorded as not applicable because the verified data does not identify this device as an automotive-qualified part.
