LT1579CS-5#PBF - 300mA Dual-Input Smart Battery Backup LDO | ADI
部品番号: LT1579CS-5#PBF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.43 | $5.43 |
| 10 | $4.84 | $48.40 |
| 100 | $4.15 | $415.00 |
| 500 | $3.46 | $1,730.00 |
| 1,000 | $2.85 | $2,850.00 |
| 3,000 | $2.64 | $7,920.00 |
LT1579CS-5#PBF 概要
An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input-to-output differential is small — the 'dropout' voltage is the minimum headroom required to keep regulation intact. The LT1579 sits within the broader hierarchy of linear regulators -> voltage regulators -> power management ICs -> semiconductor devices, and the dual-input smart-battery variant targets any system that must remain alive across a primary/backup power handover (USB ↔ Li-Ion, wall adapter ↔ supercap, mains ↔ battery).
Key features of the LT1579CS-5#PBF include seamless automatic input switching without glitches, low 50 µA quiescent current (7 µA in shutdown) for battery-life extension, fixed 5V output with ±3% tolerance, integrated reverse-current blocking between the two inputs, and a secondary select pin (S2) that lets designers force a specific input as the priority source. The SOIC-16 narrow-body package provides a manageable footprint while the exposed thermal path supports continuous 300 mA delivery at moderate ambient temperatures.
Architecturally the LT1579 combines a precision bandgap reference, two PNP-style pass elements arranged in a diode-OR topology, integrated MOSFET switch control, and the dual-comparator supervisor block. This integrated approach eliminates the discrete FETs, Schottky diodes, supervisor ICs, and sequencer glue logic that a discrete dual-rail ORing solution would otherwise require, reducing both PCB area and BOM cost.
Typical applications include battery backup for SRAM/real-time-clock supplies in meters and data loggers, USB/AC-wall-adapter power handover in portable instrumentation, supercap-backed ride-through for PLC and industrial controllers, uninterruptible supplies for microcontrollers and security sensors, and load-sharing between solar harvest and battery in remote telemetry nodes.
When designing with the LT1579CS-5#PBF, observe the 400 mV dropout rating and select input capacitance (≥10 µF low-ESR) and output capacitance (≥10 µF low-ESR, no minimum ESR window required) per the datasheet to guarantee stability across the full 0 to 300 mA load range.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: LT1579CS-5#PBF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
LT1579CS#PBF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LT1579CS-5#TRPBF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LT1579CS-3.3#PBF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LT1579CS-3#PBF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LT1579IS-5#PBF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LT1579CS-5#PBF 仕様
| トポロジー | Dual-input single-output LDO linear regulator |
| Output Voltage (Fixed) | 5 V |
| Output Voltage Tolerance | ±3 % |
| 出力電流（最大） | 300 mA |
| 入力電圧範囲 | 2.7 V to 20 V (each input) |
| ドロップアウト電圧 | 400 mV (typical at 300 mA) |
| 静止電流 | 50 µA (operating) |
| シャットダウン電流 | 7 µA |
| Number of Inputs | 2 (with seamless priority switching) |
| On-Chip Comparators | 2 (one per input for status monitoring) |
| Status Flags | 2 open-drain (STAT1, STAT2) |
| Secondary Select Pin (S2) | Yes (input priority override) |
| パッケージ | 16-lead SOIC-N (narrow body) |
| 実装タイプ | Surface Mount |
| Lead Finish | Matte Tin (Pb-free) |
| RoHS / Pb-free Status | Pb-free (PBF suffix), RoHS compliant |
| Manufacturer | Analog Devices (formerly Linear Technology) |
LT1579CS-5#PBF ピン構成
| ピン 1 | IN1 — Primary input voltage source (2.7 V to 20 V) |
| ピン 2 | IN2 — Backup input voltage source (2.7 V to 20 V) |
| ピン 3 | OUT — Regulated 5 V output |
| ピン 4 | GND — Ground |
| ピン 5 | SHDN — Shutdown pin (active high) |
| ピン 6 | S2 — Secondary select pin (force priority input) |
| ピン 7 | STAT1 — Open-drain status flag for IN1 |
| ピン 8 | STAT2 — Open-drain status flag for IN2 |
| ピン 9 | CMP1A — Comparator 1 input A |
| ピン 10 | CMP1B — Comparator 1 input B |
| ピン 11 | CMP1OUT — Comparator 1 output |
| ピン 12 | CMP2A — Comparator 2 input A |
| ピン 13 | CMP2B — Comparator 2 input B |
| ピン 14 | CMP2OUT — Comparator 2 output |
| ピン 15 | NC — Not connected (per datasheet) |
| ピン 16 | NC — Not connected (per datasheet) |
主な用途
LT1579CS-5#PBF の用途: 6 件s: Battery Backup for SRAM / Real-Time Clock, USB / Wall-Adapter Power Handover in Portable Instruments, Ride-Through for Industrial PLC / Controller Boards, Solar Harvest + Battery Power Sharing, Security / Alarm Panel Always-On Rail, Data Logger / Metering Battery Ride-Through.
Battery Backup for SRAM / Real-Time Clock
The LT1579CS-5#PBF provides the canonical uninterruptible 5 V rail for SRAM and RTC chips. Its dual-input switchover architecture lets a primary 5 V rail (e.g. AC adapter) power the load during normal operation while a coin-cell or supercap-backed rail takes over at the instant of AC loss, with zero output glitch per the ADI LT1579 datasheet (1579f). The 7 µA shutdown current extends cell lifetime in power-down states. Place a 10 µF low-ESR cap on each input and on VOUT to ride out the millisecond-scale switchover event.
おすすめ
USB / Wall-Adapter Power Handover in Portable Instruments
Portable test and measurement equipment often runs from USB or a wall adapter, but must keep recording on its internal Li-Ion pack when the cable is unplugged. The LT1579CS-5#PBF wires USB 5 V to IN1 and the 3.6–4.2 V Li-Ion rail to IN2; the chip's automatic priority logic hands the load over in microseconds with no MCU intervention. The 50 µA quiescent current adds negligible drain while idle, and the 300 mA output easily supports a microcontroller, ADC, and display backlight. Use a 10 µF X7R ceramic on each input/output for stability.
おすすめ
Ride-Through for Industrial PLC / Controller Boards
PLC and industrial controller boards must survive brownouts of tens of milliseconds without resetting. The LT1579CS-5#PBF lets a 24 V supply (via an upstream buck) drive IN1 while a supercap-fed 5 V rail (held by a separate charger) drives IN2; the chip's seamless handover keeps the microcontroller and I/O logic alive through the dropout. STAT1/STAT2 pins flag the host MCU so firmware can log the event. The 400 mV dropout at 300 mA means IN2 needs only ~5.4 V to stay in regulation, easing the supercap energy budget.
おすすめ
Solar Harvest + Battery Power Sharing
Remote telemetry nodes powered by a small solar panel must seamlessly share load between the harvester and a Li-Ion or LiPo battery. The LT1579CS-5#PBF routes the (regulator-clamped) solar rail to IN1 and the battery to IN2, letting whichever source is healthier at the moment carry the load. This eliminates the discrete diode-OR + MOSFET + supervisor chain that such systems traditionally require, cutting BOM count by 4–6 parts and saving significant PCB area. The 7 µA shutdown current preserves night-time battery capacity.
おすすめ
Security / Alarm Panel Always-On Rail
Home and commercial alarm panels need a 5 V rail that is up the moment the wall supply fails, so the dialer, sensors and microcontroller never lose state. The LT1579CS-5#PBF takes wall 12–18 V DC at IN1 and a sealed lead-acid or Li-Ion backup at IN2, switching seamlessly to backup during a tamper or outage. STAT1/STAT2 give the panel a clean 'on wall' vs 'on battery' flag for logging. The 300 mA capability covers the dialer, PIR sensors, and keypad illumination simultaneously.
おすすめ
Data Logger / Metering Battery Ride-Through
Electricity meters, water meters, and remote data loggers must keep their RTC and event log alive across repeated short brownouts. The LT1579CS-5#PBF offers the dual-input rail with 7 µA shutdown quiescent current, which is critical when the meter's primary cell must last the full 10-20 year deployment lifetime. The fixed 5 V output drives the metering MCU directly while a small supercap on the backup rail covers multi-second outages. The S2 pin lets the firmware force-supply from battery when running a radio transmission.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LT1579CS-5#PBF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LT1579CS#PBF | LT1579CS-5#TRPBF | LT1579CS-3.3#PBF | LT1579CS-3#PBF | LT1579IS-5#PBF |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | SOIC-16 (N) | SOIC-16 (N) - same | SOIC-16 (N) - same | SOIC-16 (N) - same | SOIC-16 (N) - same | SOIC-16 (N) - same |
| Output Voltage | 5 V (fixed) | Adjustable (1.5–12 V) | 5 V (fixed, identical die) | 3.3 V (fixed) | 3.0 V (fixed) | 5 V (fixed) |
| Output Current | 300 mA | 300 mA | 300 mA | 300 mA | 300 mA | 300 mA |
| Dropout Voltage | 400 mV | 400 mV | 400 mV | 400 mV | 400 mV | 400 mV |
| Quiescent Current | 50 µA | 50 µA | 50 µA | 50 µA | 50 µA | 50 µA |
| Number of Inputs | 2 | 2 | 2 | 2 | 2 | 2 |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial |
主な差別化要因
- Fully integrated dual-input switchover in one SOIC-16 （vs Discrete diode-OR + supervisor + LDO)
- Same SOIC-16 pinout across the LT1579 fixed-voltage family （vs LT1579CS#PBF (adjustable sister part))
- Dual status flags plus secondary select pin （vs Single-input LDOs without backup intelligence)
設計ノート
Per the ADI LT1579 datasheet (1579f) place a 10 µF low-ESR ceramic capacitor on each input (IN1 and IN2) and a 10 µF low-ESR ceramic capacitor on OUT. The regulator is stable with pure ceramic output capacitance (no minimum ESR window), which simplifies BOM selection. Source impedance on each input must stay low so that during handover the input that just took over the load does not collapse below 5.4 V.
Estimated: at VIN=12 V, VOUT=5 V, IOUT=300 mA, the LT1579 dissipates approximately (12-5) × 0.300 = 2.1 W continuously. The 16-pin SOIC-N has a θJA of approximately 100 °C/W on a 1 oz 2-layer board (per typical JEDEC JESD51 data for similar SOIC-16 packages), giving a junction rise of about 210 °C above 25 °C ambient — well above the 85 °C commercial limit. Use a 4-layer PCB or substantial copper pour (≥1 sq inch) to drop θJA below 50 °C/W for safe operation, or move to the LT1579CS-5 higher-power version in a GN package if thermal headroom is tight.
Common pitfalls: (1) Forgetting that STAT1/STAT2 are open-drain and need pull-up resistors; (2) assuming the SHDN pin is active-low — it is active-high; (3) reversing IN1/IN2 priority and not checking that S2 state at power-up matches the system design intent; (4) relying on the LT1579 to block reverse current without observing the absolute maximum VIN rating of 20 V per input; (5) using the LT1579CS-5 as a low-dropout replacement for a single-input LDO without understanding its 50 µA quiescent baseline.
Use a single ground plane and route IN1/IN2 traces with wide copper (≥40 mil) to minimise parasitic inductance — a 1 nH spike at 300 mA gives only 0.3 mV, but during the millisecond switchover event the parasitic L on the disabled input can ring and confuse the comparator logic. Keep the trace from each STAT pin short to the MCU GPIO and add a 100 kΩ pull-up to VCC.
コンプライアンス情報
Pb-free #PBF suffix confirms RoHS compliance per ADI product marking convention. The LT1579 is not AEC-Q100 qualified; the part is not marketed for automotive applications. Halogen-free status was not specified in the Verified Web Data and is therefore unknown.
