Analog Devices

LT1637IS8 - 1.1MHz Micropower R-R Op Amp | Analog Devices

部品番号: LT1637IS8 ✓ 生産中
2.7 V to 44 V Vdss Less than 250 µA Id 8-pin SO Package
MOQ: 1 |

LT1637IS8 概要

Analog Devices LT1637IS8 is a micropower, over-the-top operational amplifier with a 1.1 MHz gain-bandwidth product, 0.4 V/µs slew rate, and rail-to-rail input and output operation. The device accepts single or split supplies with a total voltage from 2.7 V to 44 V and is offered in an 8-pin SO package.

An operational amplifier is an analog signal-conditioning device that uses high open-loop gain to amplify voltage differences between its differential inputs. The LT1637 belongs to the precision amplifier hierarchy, combining low quiescent current with input and output swing close to the supply rails. This combination makes it useful where low power, wide supply range, and usable signal headroom are more important than high bandwidth.

The principal performance features are a 1.1 MHz gain-bandwidth product, 0.4 V/µs slew rate, less than 250 µA operating quiescent current, and a shutdown mode that reduces quiescent current to 3 µA while placing the output in a high-impedance state. According to the manufacturer datasheet, the amplifier is reverse-supply protected and supports single or split supplies across a 2.7 V to 44 V total voltage range.

The LT1637 uses rail-to-rail input and output stages to maximize usable voltage range in low-voltage systems. Its over-the-top operation permits input and output voltages to extend beyond the conventional rail-to-rail range under suitable operating conditions. This architecture is particularly valuable in battery-powered instrumentation, where the amplifier must process signals with limited supply headroom while drawing minimal standby current.

Typical uses include low-power sensor signal conditioning, portable measurement systems, industrial process monitoring, battery-operated test equipment, and general-purpose buffering. The shutdown function is useful when a periodically sampled sensor must be isolated between measurements, while the wide total supply range permits operation from low-voltage single supplies or higher-voltage split supplies.

Designers should account for input bias current, output drive, capacitive-load stability, and the transition into shutdown when selecting external compensation and passive components. The SO package is a surface-mount option for compact analog circuits, and a bypass capacitor should be placed close to the supply pins to minimize supply-noise coupling into the amplifier.

This page combines the LT1637 family specifications, ordering-code distinctions, package details, application guidance, and verified drop-in alternatives. It is intended to help engineers identify the correct electrical variant, preserve the existing PCB footprint, and plan power-consumption and signal-conditioning layouts before releasing a design to production.

ドロップイン代替品: LT1637IS8 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

LT1637IS8#PBF

✅ ドロップイン
📦 8-SO
Lead-free ordering designation for the same LT1637IS8 base device; electrical ratings remain 1.1 MHz gain-bandwidth product and 0.4 V/µs slew rate, a 0% key-parameter difference

📋 参考代替品(カタログ未掲載)

LT1637IS8#TR

✅ ドロップイン
📦 8-SO
Tape-and-reel ordering version of LT1637IS8; key electrical ratings remain 1.1 MHz gain-bandwidth product, 0.4 V/µs slew rate, and less than 250 µA operating current, a 0% key-parameter difference

📋 参考代替品(カタログ未掲載)

LT1637IS8#TRPBF

✅ ドロップイン
📦 8-SO
Lead-free tape-and-reel ordering version of LT1637IS8; key electrical ratings remain 1.1 MHz gain-bandwidth product and 0.4 V/µs slew rate, a 0% key-parameter difference

📋 参考代替品(カタログ未掲載)

LT1637IS8 最大定格&電気的特性

Product Type Single precision operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 1.1 MHz
Slew Rate 0.4 V/µs
Total Supply Voltage 2.7 V to 44 V
Operating Quiescent Current Less than 250 µA
Shutdown Quiescent Current 3 µA
Input Type Rail-to-rail
出力タイプ Rail-to-rail
Shutdown Output State High impedance
Reverse Supply Protection Supported
パッケージ 8-pin SO
実装タイプ Surface mount
動作温度範囲 -40 °C to +85 °C
Production Status Production

LT1637IS8 8-pin so ピン配置ガイド

LT1637IS8 (8-pin so パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LT1637IS8 の 8-pin so パッケージピン配置図

詳細なピン配置データはありません: LT1637IS8.

詳細は データシート をご参照ください。

主な用途

LT1637IS8 の用途: 6 件s: Battery-Powered Sensor Signal Conditioning, Portable Measurement Systems, Industrial Process Monitoring, Battery-Operated Test Equipment, Low-Power Buffering, Precision Analog Signal Amplification.

🧩

Battery-Powered Sensor Signal Conditioning

The LT1637IS8 fits low-power sensor front ends that require amplification close to the source. Its less-than-250-µA operating current limits continuous overhead, while the 3-µA shutdown mode can reduce demand between measurements. Rail-to-rail input and output operation preserves usable signal range when the sensor and amplifier share a 2.7 V to 44 V total supply. The 1.1 MHz gain-bandwidth product is suitable for many low-frequency sensor signals, while the 0.4 V/µs slew rate supports moderate-amplitude transients. Place the device close to the sensor source to reduce noise pickup, and use the shutdown control only after confirming its logic level and output-state requirements.

📱

Portable Measurement Systems

The LT1637IS8 supports portable meters and low-power measurement systems where every microamp of supply demand affects battery life. Its 1.1 MHz gain-bandwidth product is adequate for buffering and amplifying lower-bandwidth sensor outputs, while rail-to-rail operation provides more signal swing than a conventional amplifier restricted to the supply rails. The wide 2.7 V to 44 V total-voltage range also allows the amplifier to be used in single or split-supply arrangements. In a handheld instrument, keep the input path short, maintain a stable reference return, and place the supply bypass capacitor at the device to reduce coupling from the switched power source.

🏭

Industrial Process Monitoring

The LT1637IS8 is appropriate for process-monitoring inputs that require operation from a relatively high industrial supply while keeping analog signal paths compact. Its total supply capability reaches 44 V, and rail-to-rail input and output stages improve signal utilization at the system rails. The 0.4 V/µs slew rate permits reasonable response to step-like sensor changes without requiring a high-speed amplifier. Because industrial transducers can be noisy and grounded at different potentials, use appropriate input filtering, isolation, or protection ahead of the amplifier, and verify the common-mode range against the exact sensor output.

🖥️

Battery-Operated Test Equipment

The LT1637IS8 can serve buffering and gain stages in battery-operated test equipment where low standby consumption and flexible supply voltage are important. Its operating current below 250 µA reduces continuous power demand, while shutdown operation at 3 µA is useful when the instrument enters a non-measuring state. A 1.1 MHz gain-bandwidth product supports many precision and general-purpose signal-conditioning tasks, and the 0.4 V/µs slew rate helps preserve waveform shape. Place the amplifier near the protected input connector, keep high-impedance nodes short, and include a local bypass capacitor to prevent external supply activity from modulating the measured signal.

⚡

Low-Power Buffering

The LT1637IS8 works as a low-power buffer for slow sensor, reference, or control signals when the source cannot directly drive the following stage. Rail-to-rail input and output behavior improves the available signal range, and the amplifier's 2.7 V minimum total supply supports compact systems. The 1.1 MHz gain-bandwidth product is suitable for unity-gain buffering across a broad class of low-frequency and moderate-bandwidth nodes. When driving a capacitive load, check the stability guidance in the manufacturer datasheet and add an isolation resistor if required. Avoid placing high-impedance feedback or input traces beside switching nodes to prevent injected current from producing output errors.

🔧

Precision Analog Signal Amplification

The LT1637IS8 provides a combination of precision-oriented operation, 1.1 MHz bandwidth, and low supply current for general analog amplification. Its rail-to-rail input stage accepts signals near either supply rail, while the rail-to-rail output stage allows the amplified result to use more of the available voltage span. The 0.4 V/µs slew rate limits large-signal distortion when driving moderate loads. Designers should use short, guarded feedback paths and maintain clean grounding around the 8-pin SO footprint. If the source has high source impedance, account for input bias current and capacitance to prevent gain or stability errors.

おすすめ製品の概要

LT1637IS8#TR Tape-and-reel ordering option of the same amplifier 使用用途: Battery-Powered Sensor Signal Conditioning, Portable Measurement Systems, Battery-Operated Test Equipment, Low-Power Buffering LT1637IS8#PBF Lead-free ordering option of the same amplifier 使用用途: Battery-Powered Sensor Signal Conditioning, Portable Measurement Systems, Industrial Process Monitoring, Battery-Operated Test Equipment, Low-Power Buffering, Precision Analog Signal Amplification LT1637IS8#TRPBF Lead-free tape-and-reel production ordering option 使用用途: Industrial Process Monitoring, Precision Analog Signal Amplification
What is the operating voltage of LT1637IS8?
The LT1637IS8 operates from a 2.7 V to 44 V total supply voltage, including single-supply and split-supply configurations. According to the Analog Devices LT1637 datasheet, the wide operating range allows the same amplifier family to serve low-voltage portable circuits and higher-voltage industrial instrumentation while retaining rail-to-rail input and output capability.
What are the key specifications of LT1637IS8 that engineers should know?
The LT1637IS8 provides a 1.1 MHz gain-bandwidth product, 0.4 V/µs slew rate, rail-to-rail input and output, and less than 250 µA operating quiescent current. The Analog Devices datasheet also specifies a shutdown mode that reduces quiescent current to 3 µA and makes the output high impedance, while reverse-supply protection is included for improved system robustness.
Where can I download the LT1637IS8 datasheet PDF?
The official LT1637 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/1637fd.pdf. The document covers the LT1637 family’s 2.7 V to 44 V supply range, 1.1 MHz gain-bandwidth product, shutdown behavior, electrical characteristics, package options, and typical application circuits.
Where can I find the LT1637IS8 pinout?
Use the pin-description table and package drawings in the official Analog Devices LT1637 datasheet before assigning PCB tracks. The LT1637IS8 uses an 8-pin SO package, designated 8-SO in distributor listings. Confirm the exposed or connected pin functions, shutdown logic, supply connections, and bypass-capacitor requirements directly against the current manufacturer drawing.
Is LT1637IS8 suitable for battery-powered sensor circuits?
Yes, the LT1637IS8 is suitable for battery-powered sensor circuits because its operating quiescent current is less than 250 µA and shutdown current falls to 3 µA. Its 1.1 MHz gain-bandwidth product and 0.4 V/µs slew rate are adequate for many low-frequency conditioning tasks, while rail-to-rail input and output operation preserves signal range at low supply voltages.
What can replace LT1637IS8 without changing the PCB?
LT1637IS8#PBF is the lead-free ordering-code option for the same LT1637IS8 device and retains the 8-SO footprint and family electrical characteristics. LT1637IS8#TR and LT1637IS8#TRPBF also use the 8-pin SO package, but their ordering codes indicate tape-and-reel and production treatment. Verify the exact suffix, operating-temperature grade, and reel requirements before substitution.
Is LT1637IS8 the same as LT1637IS8#PBF?
LT1637IS8 and LT1637IS8#PBF refer to the same base LT1637 family device, with the suffix distinguishing ordering and packaging information such as lead-free processing. Both are associated with the 8-pin SO configuration. Procurement should use one complete approved MPN rather than treating the base and suffixed ordering codes as separate technical designs.
When should I choose LT1637IS8 over LT1637HS8?
Choose LT1637IS8 when shutdown is not required and the design benefits from the standard LT1637 function set. LT1637HS8 is identified in the family documentation as a functional equivalent rather than a form-fit-function alternate. Because shutdown-pin behavior can differ, confirm that the existing PCB and control logic match the electrical functions required by the selected device.
LT1637IS8 vs LT1637HS8 - which is better for a low-power design?
The LT1637IS8 is the standard family choice with a 1.1 MHz gain-bandwidth product, 0.4 V/µs slew rate, and less than 250 µA operating current. LT1637HS8 is described as a functional equivalent, but its shutdown implementation may differ. For a fixed PCB, use LT1637HS8 only after verifying pin-level compatibility and the required shutdown-control voltage.
Where can I buy LT1637IS8 online?
Use the Request a Quote form on this page to request LT1637IS8 availability, current commercial terms, and the appropriate ordering suffix. The form is the appropriate route for an exact purchase inquiry because LT1637IS8 can be ordered under multiple packaging and processing codes, including LT1637IS8#PBF and LT1637IS8#TR.
What is the price of LT1637IS8?
Use the Request a Quote form on this page for the current price of LT1637IS8. Commercial pricing can depend on the exact suffix, quantity, reel or tube requirement, and production status. The quoted inquiry should specify LT1637IS8 and any required lead-free, tape-and-reel, or extended-temperature ordering code.
What is the lead time for LT1637IS8?
Request the current lead time through the Request a Quote form on this page. Lead time may vary with the selected LT1637 ordering suffix, production quantity, and packaging requirement. Analog Devices identifies the LT1637 as a production device, but a firm schedule should be confirmed for the complete MPN and delivery format.
Is LT1637IS8 in stock?
Current LT1637IS8 inventory should be confirmed through the Request a Quote form on this page. The complete ordering code and required package format should be included in the request because LT1637IS8, LT1637IS8#PBF, and LT1637IS8#TR describe related catalog entries with different ordering or delivery conditions.
What is the best Analog Devices equivalent for LT1637IS8?
The closest identified Analog Devices equivalent is LT1637IS8#PBF, which belongs to the same LT1637 family and uses the same 8-SO configuration with the lead-free ordering designation. The manufacturer lists the LT1637 as production. For applications requiring a shutdown-control function, verify the pin and logic requirements rather than selecting a different family solely by bandwidth.
How much quiescent current does LT1637IS8 use?
The LT1637IS8 draws less than 250 µA during normal operation and approximately 3 µA in shutdown. According to the Analog Devices LT1637 datasheet, shutdown places the output in a high-impedance state while sharply reducing current consumption. The shutdown value is useful for estimating standby demand in periodically sampled sensor and instrumentation systems.

エンジニアリング参考データ: LT1637IS8 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose LT1637IS8 when the design needs a low-power, single amplifier operating from 2.7 V to 44 V total supply with rail-to-rail input and output, a 1.1 MHz gain-bandwidth product, and a 0.4 V/µs slew rate. Select LT1637IS8#PBF when the approved BOM specifically requires the lead-free ordering code, and use LT1637IS8#TR or LT1637IS8#TRPBF when the assembly process requires the corresponding tape-and-reel format. These options retain the same 8-SO package and key family ratings. Do not treat LT1637HS8 or LT1637MPS8 as automatic replacements: the former is identified as a functional equivalent and may differ in shutdown implementation, while the latter uses a different package. For any substitution, verify the complete suffix, package drawing, pin functions, shutdown logic, temperature grade, and supply limits against the manufacturer datasheet.

代替品との比較

パラメータ この製品 LT1637IS8#PBF LT1637IS8#TR LT1637IS8#TRPBF
Package 8-SO 8-SO 8-SO 8-SO
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Gain-Bandwidth Product 1.1 MHz 1.1 MHz 1.1 MHz 1.1 MHz
Slew Rate 0.4 V/µs 0.4 V/µs 0.4 V/µs 0.4 V/µs
Total Supply Voltage 2.7 V to 44 V 2.7 V to 44 V 2.7 V to 44 V 2.7 V to 44 V
Operating Quiescent Current Less than 250 µA Less than 250 µA Less than 250 µA Less than 250 µA
Shutdown Quiescent Current 3 µA 3 µA 3 µA 3 µA
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Reverse Supply Protection Supported Supported Supported Supported
Ordering Treatment Base LT1637IS8 ordering code Lead-free Tape and reel Tape and reel, lead-free

主な差別化要因

  • Low-current operation with rail-to-rail signal swing (vs LT1637IS8#PBF)
  • Wide total supply-voltage range (vs LT1637IS8#TR)
  • Shutdown reduces standby consumption (vs LT1637IS8#TRPBF)

設計ノート

Use the shutdown function when the amplifier is only needed during periodic measurements. Normal operating quiescent current is below 250 µA, while shutdown reduces it to 3 µA and places the output in a high-impedance state. Confirm the shutdown-pin voltage levels and output behavior in the manufacturer pin table, and ensure that no external node forces the output away from its intended state.

Place the supply bypass capacitor and any required compensation components close to their associated LT1637IS8 pins. Keep input and feedback traces short, particularly when the source impedance is high, because board leakage and parasitic capacitance can alter effective bias current and phase margin. Route shutdown and supply traces away from sensitive amplifier inputs to minimize injected noise during switching.

Do not select LT1637HS8 as an automatic substitute for LT1637IS8 solely because it is listed as a functional equivalent. Its shutdown arrangement can differ, and the LT1637IS8 family includes ordering codes for lead-free and tape-and-reel delivery. Confirm the complete approved MPN, package, temperature grade, pin functions, and shutdown logic before releasing a replacement to production.

Check output drive and capacitive-load stability before using the 0.4 V/µs slew rate to process fast edges. Use the manufacturer stability guidance and isolate large capacitive loads with a series resistor when necessary. Because the amplifier is rail-to-rail, check input and output behavior near both supply rails at the actual signal level, temperature, and load rather than assuming ideal rail limits.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The #PBF ordering suffix identifies a lead-free catalog option, but separate RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 statements were not included. Compliance remains unknown except where an ordering treatment is explicitly identified.

関連検索

LT1637IS8 LT1637IS8 datasheet LT1637IS8 datasheet pdf LT1637IS8 pinout LT1637IS8 equivalent LT1637IS8 replacement LT1637IS8 cross reference LT1637IS8 footprint LT1637IS8 price LT1637IS8 stock Analog Devices LT1637IS8 LT1637IS8 vs LT1637HS8 LT1637IS8 application circuit LT1637 8-SO pinout

関連部品&用語

Analog Devices Linear Technology LT1637IS8 LT1637IS8#PBF LT1637IS8#TR LT1637IS8#TRPBF LT1637HS8 LT1637MPS8 LT1637 Operational amplifier Precision amplifier Rail-to-rail input Rail-to-rail output Gain-bandwidth product Slew rate Quiescent current Shutdown mode Reverse supply protection Over-the-top operation 8-SO package SOIC family Surface mount Single-supply operation Split-supply operation Sensor signal conditioning Battery-powered instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示