M2GL060-VFG400 - 56.5K Logic Cells FPGA | Microchip
部品番号: M2GL060-VFG400 ✓ 生産中M2GL060-VFG400 概要
An FPGA is a programmable semiconductor whose logic fabric, interconnect, and I/O can be configured after manufacture. Within the device hierarchy, the M2GL060-VFG400 belongs to the IGLOO2 family of flash-based FPGAs, which sits below the broader field-programmable gate array and programmable-logic categories. Flash configuration retains the programmed logic image when power is removed, allowing systems to resume operation without a separate configuration PROM.
The M2GL060-VFG400 provides 56.5K logic elements, 207 user I/O, and an embedded memory subsystem that includes on-chip flash, 32 KB embedded SRAM, and multiple DMA controllers. Its communications-oriented architecture supports applications such as bridging, I/O expansion and conversion, system management, secure connectivity, video and image processing, and industrial control. The 400-LFBGA package supports dense board-level integration while exposing the substantial I/O count required by programmable-logic designs.
Microchip describes the IGLOO2 family as targeting cost-optimized FPGA markets while combining fourth-generation flash-based logic with high-performance communications interfaces. Because the M2GL060 is a low-density member, it is appropriate when a design needs substantial programmable logic but does not require the resources of a larger FPGA. Its non-volatile configuration also helps simplify boot behavior in equipment that must operate immediately after power restoration.
Typical applications include protocol bridging, industrial interface conversion, embedded system management, secure communications, video and image processing, and general-purpose I/O expansion. A board-level design can place the FPGA between processors or sensors and fieldbus networks, allowing parallel data paths, timing constraints, and protocol conversion to be implemented in programmable logic. The 207-I/O count is especially useful for systems that must accommodate multiple buses, control signals, and high-speed data interfaces.
A critical design consideration is that BGA routing, power distribution, decoupling, and programming-tool compatibility must be evaluated before committing the 400-LFBGA footprint to a PCB. Use the IGLOO 2 FPGA Packaging and Pin Descriptions User Guide to assign banks and verify package constraints, and use the IGLOO 2 FPGA and SmartFusion 2 SoC FPGA Datasheet for electrical and functional limits. Software and bitstream compatibility should also be confirmed for the exact device identifier.
This product record combines the manufacturer device information with distributor and cross-reference findings to provide practical selection context. It also organizes the verified FPGA resources, package information, alternatives, applications, and design cautions needed to plan an IGLOO2-based board without relying on a single catalog entry.
ドロップイン代替品: M2GL060-VFG400 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: M2GL060-VFG400 （同一形状・フットプリント） — 相違点: Device Type, Package, Configuration Memory, FPGA Fabric Generation, Logic Elements.
M2GL060-VFG400I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
M2GL060-VF400
✅ ドロップイン価格はお問い合わせください
データシートを見る →M2GL060-VFG400 最大定格＆電気的特性
| Device Type | IGLOO2 low-density field-programmable gate array |
| Logic Elements | 56,500 logic elements |
| User I/O | 207 I/O |
| パッケージ | 400-LFBGA |
| Configuration Memory | On-chip flash |
| FPGA Fabric Generation | Fourth-generation flash-based fabric |
| Embedded SRAM | 32 KB |
| DMA Controllers | Multiple DMA controllers |
| Programmable Logic | Non-volatile flash configuration |
| Product Status | In Production |
| Device Category | Low-density FPGA |
| Communications Interfaces | High-performance communications interfaces |
M2GL060-VFG400 400-lfbga ピン配置ガイド
M2GL060-VFG400 (400-lfbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: M2GL060-VFG400.
詳細は データシート をご参照ください。
主な用途
M2GL060-VFG400 の用途: 6 件s: Industrial Protocol Bridging, Secure Connectivity and Data Preprocessing, Video and Image Processing, I/O Expansion and Signal Conversion, System Management and Control, Communications Control Plane.
Industrial Protocol Bridging
The M2GL060-VFG400 fits industrial protocol-bridging designs that need to translate between parallel, serial, and legacy interfaces without relying on a hardwired ASIC. Its 56,500 logic elements provide substantial configurable logic for state machines, packetization, clock-domain handling, and protocol state management, while 207 I/O provide substantial connectivity to sensors, processors, and fieldbus transceivers. On-chip flash preserves the bridge configuration across power cycles, reducing dependence on an external configuration memory. Engineers should use the IGLOO 2 packaging guide to confirm I/O-bank assignments and the device datasheet to establish timing and voltage limits.
おすすめ
Secure Connectivity and Data Preprocessing
The M2GL060-VFG400 is suitable for secure-connectivity front ends that combine protocol termination, packet filtering, buffering, and data preprocessing in programmable logic. The 56,500 logic elements can implement parallel datapaths and control state machines, while multiple DMA controllers support efficient movement of data within the embedded memory subsystem. Its 32 KB of embedded SRAM supports temporary buffering, and 207 I/O allow connection to multiple external buses and security peripherals. Flash-based configuration preserves the programmed logic image after removal of power, which is useful in equipment requiring a defined recovery state.
おすすめ
Video and Image Processing
The M2GL060-VFG400 can implement moderate parallel video or image-processing functions when the design fits within 56,500 logic elements and the available memory resources. Configurable logic can support pixel formatting, thresholding, synchronization, filtering, and interface timing, while 207 I/O provide access to camera sensors, frame stores, and display controllers. The device’s on-chip flash simplifies persistent configuration in imaging equipment that must restore the same processing pipeline after power-up. Designers should budget logic, SRAM, multiplier, and clock resources in the IGLOO 2 development environment before committing to the design.
おすすめ
I/O Expansion and Signal Conversion
The M2GL060-VFG400 is well suited to I/O expansion and signal-conversion boards because its 207 I/O can connect multiple digital peripherals to an embedded processor or FPGA platform. The 56,500 logic elements can implement glue logic, level-aware timing functions, data capture, format conversion, and fault handling, while the communications interfaces support high-performance data movement. Flash-based configuration allows a compact adapter board to retain its conversion behavior across power cycles. Use the package pin-description guide to verify bank voltage compatibility and confirm that every external signal meets the device’s timing requirements.
おすすめ
System Management and Control
The M2GL060-VFG400 can serve as a dedicated system-management FPGA for power sequencing, reset generation, watchdog supervision, health monitoring, and configuration coordination. Its configurable logic and 207 I/O allow multiple supervisory functions to be consolidated while maintaining precise timing relationships among power rails and peripherals. The embedded memory subsystem and multiple DMA controllers allow status and diagnostic information to be buffered for a host processor. Non-volatile flash configuration preserves the management policy and personality after power is removed, supporting predictable startup behavior in industrial and communications equipment.
おすすめ
Communications Control Plane
The M2GL060-VFG400 fits communications control-plane tasks that require configurable packet handling, aggregation, routing, and peripheral interfacing. With 56,500 logic elements and high-performance communications interfaces, the IGLOO2 device can implement dedicated datapaths alongside embedded control functions. Its 207 I/O supports connectivity to processors, transceivers, memories, and management interfaces, while the on-chip flash retains the control configuration. Exact suitability depends on lane rates, protocol timing, memory requirements, and I/O standards, all of which should be checked against the manufacturer datasheet and the device’s supported interface configuration.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: M2GL060-VFG400 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | M2GL060-VFG400I | M2GL060-VF400 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA | 400-LFBGA - same package | 400-LFBGA - same package |
| Device Family | IGLOO2 low-density FPGA | IGLOO2 low-density FPGA | IGLOO2 low-density FPGA |
| Logic Elements | 56,500 logic elements | 56,500 logic elements | 56,500 logic elements |
| User I/O | 207 I/O | 207 I/O | 207 I/O |
| Ordering Suffix | VFG400 | VFG400I - industrial-temperature ordering suffix | VF400 - device code without the G character |
主な差別化要因
- Same-package industrial-temperature migration path （vs M2GL060-VFG400I)
- Close same-family board-reuse candidate （vs M2GL060-VF400)
- Substantial connectivity for programmable-logic integration （vs M2GL060-T)
設計ノート
Treat the 400-LFBGA footprint as a high-density BGA layout. Assign power, ground, and signal balls by bank using the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide, then verify every escape route against the PCB fabricator’s current design rules. Plan decoupling capacitance at each supply ball, preserve the package’s thermal and mechanical land pattern, and avoid substituting a generic 400-ball footprint unless its dimensions and ball map have been checked.
Use the manufacturer datasheet for the complete I/O and core voltage ranges before assigning bank pins to external interfaces. Ensure each powered bank has a local decoupling network and that supply sequencing complies with the device’s power-up requirements. Because the package contains many I/O resources, review simultaneous-switching noise and ground-current distribution before setting high-speed interface and return-path assignments on the PCB.
Do not treat an ordering-code variant as interchangeable without checking the Microchip ordering table, temperature grade, package identifier, and speed or qualification options. In particular, compare M2GL060-VFG400 with M2GL060-VFG400I and M2GL060-VF400 in the manufacturer device-selection data. Re-run the complete bitstream, timing, and hardware validation after any such substitution, even when catalog records show the same 400-LFBGA package and 207-I/O count.
Assign high-speed interfaces to supported banks and derive routing constraints from the IGLOO 2 device characterization rather than generic FPGA assumptions. Keep clock and high-speed data paths short, provide matched reference planes where required, and avoid routing sensitive signals across power-plane splits. Simulation should include expected loading, board-level parasitics, and the clocking architecture rather than relying only on device-level timing analysis.
コンプライアンス情報
The verified records identify the IGLOO2 family and its flash-based architecture but do not state the target MPN's compliance declarations. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status in the manufacturer product documentation and declaration records before procurement.
