MC14541BD - 3MHz Programmable Timer | onsemi | Clock IC
部品番号: MC14541BD ✓ 生産中MC14541BD 概要
A programmable timer is a clock-and-timing semiconductor that counts oscillator cycles and derives a delayed or periodic output. Within the broader device hierarchy, the MC14541BD belongs to the timer-counter category, combining a frequency-stable timing element with digital counter and output-control logic. This makes it useful when a circuit needs a basic time interval or recurring output generated locally from a small number of external timing components.
The MC14541BD contains three primary functional blocks. Its integrated oscillator operates with an external capacitor and two resistors, while its 16-stage binary counter provides the counting structure used to create timing intervals. An automatic power-on reset circuit initializes the counter when power is applied, reducing the need for external reset sequencing in straightforward timing designs. Output control logic governs the behavior of the timer output.
The 3 MHz maximum oscillator frequency establishes the upper operating point for the internal oscillator. Actual operating frequency depends on the selected external resistor-capacitor network, component tolerances, temperature, supply conditions, and the electrical characteristics of the timing network. Designers should select timing components against the manufacturer datasheet limits and verify frequency tolerance across the intended temperature range rather than assuming a perfectly constant period.
Typical uses include general-purpose delay generation, periodic pulse generation, industrial control timing, oscillator-based clocking, and embedded timing subcircuits. The device can also serve as a building block in test fixtures and small control systems where an autonomous timer is more convenient than relying on a host microcontroller. The 14-pin SOIC package supports conventional surface-mount assembly and is also available in legacy through-hole-oriented component ecosystems.
The principal design consideration is the oscillator network. Place the external resistor and capacitor close to their associated pins, use low-tolerance parts when timing accuracy matters, and reserve adequate ground-return paths to minimize coupling into the counter and output circuitry. Because power-on reset starts the timing sequence automatically, software or external logic should treat the first output transition as an initialization event rather than an arbitrary control signal.
This product page consolidates the verified device identity, oscillator and counter features, package information, sourcing options, and drop-in replacement guidance. It also adds practical selection criteria and design notes for engineers evaluating the MC14541BD against other 14-pin programmable timer implementations.
ドロップイン代替品: MC14541BD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC14541BD （同一形状・フットプリント） — 相違点: Product Type, Package.
MC14541BDG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC14541BDR2G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC14541BF
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC14541BFELG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
CD4541BM
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC14541BD 仕様
| Product Type | Programmable timer IC |
| Maximum Oscillator Frequency | 3 MHz |
| Counter Stages | 16 stages |
| Oscillator Architecture | Integrated oscillator using 2 external resistors and 1 external capacitor |
| Counter Type | Binary counter |
| Power-On Reset | Automatic |
| Output Control Logic | Integrated |
| Logic Technology | CMOS |
| パッケージ | 14-pin SOIC |
| ピン数 | 14 pins |
| 実装タイプ | Surface mount |
MC14541BD 14-pin soic ピン配置ガイド
MC14541BD (14-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MC14541BD.
詳細は データシート をご参照ください。
主な用途
MC14541BD の用途: 6 件s: Industrial Control Delay Generation, Periodic Pulse and Tone Generation, Test Fixture Timing Reference, Appliance Sequencing and Delay Logic, Embedded Oscillator and Counter Subcircuit, Power-On Reset and Event Trigger Circuit.
Industrial Control Delay Generation
The MC14541BD fits industrial control systems that require a local delay event without continuously operating a microcontroller. Its integrated oscillator works with two external resistors and one capacitor, while the 16-stage binary counter supplies the timing structure. The automatic power-on reset initializes the sequence when supply voltage is applied, helping produce a deterministic starting condition. With a maximum oscillator frequency of 3 MHz, the circuit can support relatively short timing intervals when the external network and counter configuration are appropriate. Designers should validate timing tolerance, supply behavior, and output timing across the complete industrial temperature range before production release.
おすすめ
Periodic Pulse and Tone Generation
The MC14541BD can generate recurring pulses or timing edges when its oscillator, counter, and output-control functions are configured as a periodic timer. The 16-stage binary counter divides the oscillator-derived timing sequence, while the external resistor-capacitor network determines the available frequency range. Its maximum oscillator frequency of 3 MHz makes it suitable for fast timing tasks that do not require the output to reach that limit. The automatic power-on reset provides repeatable initialization after power restoration. Confirm the exact output waveform and counter ratio from the datasheet because package equivalence alone does not guarantee identical output timing or polarity.
おすすめ
Test Fixture Timing Reference
The MC14541BD is useful in test fixtures that require a self-contained timing trigger between a controller and the device under test. Its integrated oscillator avoids a separate clock source, and the 16-stage counter provides a predictable division structure. The automatic power-on reset makes the fixture restart deterministically after power cycling, while the 3 MHz maximum oscillator frequency allows timing periods short enough for automated measurement sequences. Place the timing network close to the device and route the timer output away from sensitive analog nodes. Validate trigger jitter, reset behavior, and output delay before relying on the fixture for production measurements.
おすすめ
Appliance Sequencing and Delay Logic
The MC14541BD can support appliance control boards that need delayed or periodic logic after power-on. Automatic reset establishes a known timer state, and the integrated oscillator plus 16-stage counter implement timing without requiring a dedicated real-time clock. The 14-pin SOIC package is convenient for mixed analog and digital control boards, while the 3 MHz oscillator ceiling permits timing intervals much shorter than those typically used for minutes or hours. Use the device for local sequencing rather than calendar timekeeping, and confirm that output polarity and reset timing satisfy the appliance's control requirements.
おすすめ
Embedded Oscillator and Counter Subcircuit
The MC14541BD provides a compact oscillator-counter subcircuit for embedded systems that need an auxiliary timing channel. The oscillator uses two external resistors and one capacitor, while the 16-stage binary counter allows the timing sequence to be divided for downstream logic. Its maximum oscillator frequency of 3 MHz supports fast local timing without adding another clock source. The automatic power-on reset helps synchronize the auxiliary timer to system startup, although the host design must still define which output edge represents the first valid event. This arrangement is especially useful in control systems where a microcontroller is busy with primary real-time tasks.
おすすめ
Power-On Reset and Event Trigger Circuit
The MC14541BD suits power-control circuits that must generate an event after supply startup. Its automatic power-on reset initializes the internal 16-stage binary counter, and the integrated oscillator establishes the timing reference using two external resistors and one capacitor. The resulting output can trigger another circuit once the selected timing count is reached. The 3 MHz maximum oscillator frequency permits short delays for sequencing sensitive loads, while the 14-pin SOIC package supports surface-mount assembly. Verify the output state during reset and the precise delay accuracy across supply and temperature before using the timer as a safety-critical interlock.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC14541BD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC14541BDG | MC14541BDR2G | MC14541BF | MC14541BFELG | CD4541BM |
|---|---|---|---|---|---|---|
| Package | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 |
| Brand | onsemi | onsemi | onsemi | NXP | NXP | Texas Instruments |
| Product Type | Programmable timer IC | Programmable timer | Programmable timer | Programmable timer | Programmable timer | Programmable timer |
| Counter Stages | 16 stages | 16 stages | 16 stages | 16 stages | 16 stages | 16 stages |
| Number of Pins | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins |
主な差別化要因
- Integrated oscillator with explicit 3 MHz upper frequency （vs CD4541BM)
- Automatic counter initialization （vs MC14541BF)
- Same 16-stage timing architecture across the onsemi family （vs MC14541BDG)
設計ノート
Route the external timing capacitor and the two oscillator resistors close to their associated MC14541BD pins. Keep the timing-loop copper compact, provide a direct ground-return path, and avoid placing the network beside switching nodes or high-current motor traces. The integrated oscillator reaches a maximum frequency of 3 MHz, so parasitic capacitance around these connections can affect practical timing accuracy even when nominal component tolerances are small.
Place the supply bypass capacitor at the device's power and ground pins and isolate the timer output from sensitive analog or clock inputs. The automatic power-on reset initializes the 16-stage counter after power is applied, so the first output transition may occur before external control logic reaches its steady state. Define that startup transition in the system state machine and avoid treating it as a normal periodic event.
Do not assume that devices with similar timer functions have identical pinout, counter ratios, reset polarity, or output timing. Verify every numbered pin and output state against the manufacturer datasheet before substituting MC14541BDG, MC14541BDR2G, MC14541BF, MC14541BFELG, or CD4541BM. Also verify the operating temperature, supply range, oscillator accuracy, and qualification because these attributes are not established by the 14-pin package alone.
コンプライアンス情報
The manufacturer datasheet identifies CMOS logic and a 14-pin SOIC package. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the retrieved product records.
