MC68331CEH25 - 25MHz CPU32 M68300 Microcontroller PQFP-132 | NXP
部品番号: MC68331CEH25 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $42.54 | $42.54 |
| 10 | $38.2 | $382.00 |
| 100 | $32.85 | $3,285.00 |
| 500 | $28.4 | $14,200.00 |
| 1,000 | $24.1 | $24,100.00 |
MC68331CEH25 概要
A 32-bit microcontroller is an embedded processing IC whose datapath, registers and ALU are 32 bits wide, enabling single-instruction operations on wide data words and larger linear address spaces than 8- or 16-bit parts. The M68300 family belongs to the ColdFire/M68K lineage (CPU32 -> M68k -> ColdFire -> embedded 32-bit MCU) of CISC RISC-style CISC cores, and within NXP's portfolio it sits below the ColdFire MCF5xxx line. The MC68331CEH25 uses the standard M68300 modular IP blocks, which simplifies migration within the family.
Key features include 25 MHz CPU32 core performance, ROMless operation for flexible external memory interfacing, the GPT timer block (with capture, compare and pulse-width modulation functions), the QSM providing queued SCI and SPI channels, and the SIM block that handles chip-select generation, system protection, clock synthesis and interrupt prioritization. The 132-pin PQFP footprint gives access to the full external bus plus all on-module peripheral pins.
Typical applications include industrial control systems, automotive body and chassis electronics (pre-CAN-era platforms), factory automation, motor control via the GPT PWM outputs, and embedded communication gateways that leverage the QSM serial channels. The 132-pin PQFP package and ROMless architecture make the part attractive where high-performance 32-bit processing is needed alongside custom boot/storage strategies.
When designing with this device, ensure the external bus and chip-select signals are properly terminated, the 25 MHz system clock is stable, and the Vcc rails meet the M68300 family DC specifications referenced in the datasheet. Because the part is in NXP's End-of-Life program, source any qualification stock carefully and review the discontinuance notice for the official last-time-buy window and recommended migration target.
ドロップイン代替品: MC68331CEH25 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC68331CEH25 （同一形状・フットプリント） — 相違点: Package, Program Memory Type, Core, Data Bus Width, Peripherals.
クイック比較ツール — 並列比較する代替部品を選択:
MC68331CEH20
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68331CEH16
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC68332ACEH25
✅ ドロップイン✓ 在庫あり
$35.54 / 個
データシートを見る →MC68332GCEH25
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC68332GVEH25
✅ ドロップイン✓ 在庫あり
$17.8 / 個
データシートを見る →MC68331CEH25 最大定格＆電気的特性
| Core | CPU32 (32-bit) |
| Operating Frequency | 25 MHz |
| Program Memory Type | ROMless (external memory required) |
| パッケージ | 132-pin PQFP (24.13 mm x 24.13 mm) |
| 実装タイプ | Surface Mount |
| Integrated Modules | SIM (System Integration Module), GPT (General Purpose Timer), QSM (Queued Serial Module) |
| Internal Bus | IMB (Intermodule Bus) |
| Peripherals | GPT (capture/compare/PWM), QSM (SCI + SPI) |
| Family | M68300 modular microcontroller family |
| Lifecycle | End of Life (per NXP product page) |
MC68331CEH25 132-pin pqfp (24.13 mm x 24.13 mm) ピン配置ガイド
MC68331CEH25 (132-pin pqfp (24.13 mm x 24.13 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC68331CEH25.
詳細は データシート をご参照ください。
主な用途
MC68331CEH25 の用途: 6 件s: Industrial Control Systems, Automotive Body and Chassis Electronics, Motor Control and PWM Drives, Embedded Communication Gateways, Factory Automation and Process Control, Test and Measurement Instrumentation.
Industrial Control Systems
The MC68331CEH25's 25 MHz CPU32 core and SIM-managed chip-select logic suit legacy PLC-style industrial controllers that need 32-bit arithmetic, deterministic timer interrupts, and broad GPIO access via the 132-pin PQFP. The GPT module's PWM outputs can directly drive solenoid valves, stepper drivers and indicator LEDs, while the QSM's SCI channel links to operator panels and the SPI channel drives ADC/DAC peripherals. The ROMless architecture lets manufacturers store large ladder-logic or motion-control firmware in external Flash, enabling field updates. Compared with newer ARM Cortex-M parts, the MC68331CEH25 is preferred where existing CISC toolchains and 5V-tolerant I/O are still in service, and where dropping in a pin-compatible part avoids PCB redesign during long-life industrial equipment maintenance.
おすすめ
Automotive Body and Chassis Electronics
Pre-CAN-era automotive body controllers (central locking, climate, lighting, instrument clusters) used M68300 parts like the MC68331CEH25 because of their robust 5V-tolerant PQFP-132 I/O and deterministic interrupt response. The GPT's capture inputs read Hall-effect and wheel-speed sensors directly, while QSM SCI channels talk to dashboard and HVAC sub-modules. The 25 MHz CPU32 core handles multi-task scheduling of body control firmware stored in external EPROM/Flash. This part is also widely found in older chassis modules where CAN had not yet been mandated, and the QSM SPI drives dashboard display drivers and EEPROM storage. For new designs, NXP's ColdFire or S32K families supersede the MC68331CEH25, but the existing installed base still relies on the original 132-pin PQFP footprint.
おすすめ
Motor Control and PWM Drives
The MC68331CEH25's GPT module provides multiple independent PWM channels with programmable duty, dead-time and period, which is sufficient for DC, brushed servo and basic brushless DC (BLDC) motor drives at industrial switching frequencies. The 25 MHz CPU32 core executes field-oriented control (FOC) loops at moderate PWM rates, while the SIM's chip-select outputs interface external gate-driver or power-stage peripherals. The QSM SCI channel provides the communication link to a host PLC or HMI, and the 132-pin PQFP offers enough I/O for analog feedback via SPI-driven ADCs. For high-end servo or multi-axis drives, the MC68332 family's TPU module is preferable, but the MC68331CEH25 remains a cost-effective controller for single-axis pumps, fans, conveyor motors and valve actuators.
おすすめ
Embedded Communication Gateways
The MC68331CEH25's QSM module delivers queued SCI (UART) and SPI channels that are well matched to legacy industrial gateways, protocol converters and remote telemetry units. The CPU32 core runs 32-bit protocol stacks (Modbus RTU/ASCII, proprietary SCADA protocols) while the SIM's programmable chip-selects directly map external UART, sensor and memory peripherals. The 132-pin PQFP supports the address/data bus needed for SRAM-backed packet buffers. The part's 25 MHz clock and ROMless architecture are appropriate when firmware size is small to mid-range and is stored in external Flash that can be updated in the field. In modern designs, a ColdFire or Kinetis MCU would replace it, but the MC68331CEH25 still serves as a long-lifetime gateway processor.
おすすめ
Factory Automation and Process Control
PLC-style process controllers, distributed I/O nodes and dedicated machine controllers used the MC68331CEH25 because the 132-pin PQFP exposes the full 32-bit external bus plus the SIM's chip-select logic for glueless memory and I/O expansion. The GPT captures high-speed encoder feedback, the QSM links to operator panels, and the CPU32 handles PID loops for temperature, flow and pressure regulation. The part's deterministic interrupt latency (typical of M68k CISC cores) is well suited to hard-real-time control loops at 1-10 kHz rates. The ROMless design means each application uses application-specific external Flash for recipe storage, calibration tables and firmware revisions, simplifying customization for different machines on the same production line.
おすすめ
Test and Measurement Instrumentation
Bench-top and rack-mounted test equipment (data loggers, signal generators, calibration units, industrial testers) used the MC68331CEH25's 25 MHz CPU32 core for measurement math, the GPT for precise sample-rate timing, and the QSM SCI for remote command interfaces. The 132-pin PQFP package gives access to the external bus needed to drive high-resolution parallel ADC/DAC front ends and to memory-map LCD or VFD displays. The SIM's programmable chip-selects allow flexible memory partitioning between boot Flash, working SRAM and I/O peripherals. The ROMless architecture lets instrument vendors ship application-specific firmware in external Flash for easier field calibration and upgrades, while keeping the core processor silicon generic.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC68331CEH25 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC68331CEH20 | MC68331CEH16 | MC68332ACEH25 | MC68332GCEH25 | MC68332GVEH25 |
|---|---|---|---|---|---|---|
| Package | 132-pin PQFP (24.13x24.13 mm) | 132-pin PQFP (same) | 132-pin PQFP (same) | 132-pin PQFP (same) | 132-pin PQFP (same) | 132-pin PQFP (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | CPU32 (32-bit) | CPU32 (32-bit) | CPU32 (32-bit) | CPU32 (32-bit) | CPU32 (32-bit) | CPU32 (32-bit) |
| Operating Frequency | 25 MHz | 20 MHz | 16 MHz | 25 MHz | 25 MHz | 25 MHz |
| Integrated Timer Module | GPT (capture/compare/PWM) | GPT | GPT | TPU (Time Processing Unit) | TPU | TPU |
| CAN Module | No (QSM SCI/SPI only) | No | No | TouCAN | TouCAN | TouCAN |
| Serial Module | QSM (SCI + SPI) | QSM (SCI + SPI) | QSM (SCI + SPI) | QSM (SCI + SPI) | QSM (SCI + SPI) | QSM (SCI + SPI) |
| Program Memory | ROMless (external) | ROMless (external) | ROMless (external) | ROMless (external) | ROMless (external) | ROMless (external) |
| Lifecycle Status | End of Life | End of Life | End of Life | End of Life | End of Life | End of Life |
主な差別化要因
- Higher core clock than 20 MHz / 16 MHz speed grades （vs MC68331CEH20 / MC68331CEH16)
- Simpler GPT/QSM block set vs MC68332 TPU （vs MC68332ACEH25)
- No TouCAN module vs MC68332 family （vs MC68332GCEH25)
設計ノート
Estimated: the MC68331CEH25 draws core and I/O current from the 5V Vcc rail typical of M68300 PQFP parts. Place 100 nF decoupling capacitors as close as possible to every Vcc/Vss pin pair around the 132-pin PQFP perimeter, and add bulk 10-47 uF tantalum or ceramic capacitors near the package to suppress switching transients from the external bus. Decoupling strategy matters more than for modern MCUs because the M68k external bus can switch 16-32 mA per cycle.
Route the external address and data bus with matched-length traces and a ground reference plane beneath the PQFP to control impedance and crosstalk. Keep CLKOUT and the system clock traces short and guarded, and provide proper bus-termination resistors on long bus runs because the M68300 external bus is TTL-style and not series-terminated on-chip. Place external program memory (EPROM/Flash) and SRAM close to the bus pins to minimize access-time margin loss.
Because the MC68331CEH25 is announced End of Life, do not start a new design without first reviewing the NXP Product Change Notice for the last-time-buy window and recommended migration target (typically a ColdFire or Kinetis part). Avoid hand-editing the ROMless boot flow - configure the SIM's bus-width and chip-select registers correctly for the external memory map at reset, or the CPU32 will lock up with no valid instruction fetch.
Estimated: at 25 MHz with full external-bus activity, the MC68331CEH25 dissipates roughly 0.5-0.8 W depending on bus loading and output-toggle rate. The 132-pin PQFP has a theta_JA of approximately 35-45 C/W on a 4-layer PCB with adequate copper, so junction temperature stays well within the industrial range without a heatsink, but ensure 1 square inch of copper pour is connected to the GND pins to keep thermals under control in enclosed industrial enclosures.
コンプライアンス情報
Compliance values are [DATA_NEEDED] because the verified web data sources (DigiKey, Mouser, NXP product page) do not explicitly state RoHS/REACH status. NXP product page lists an Environmental Quality link that would resolve this. AEC-Q100 is not qualified - the M68300 family predates widespread automotive AEC-Q100 screening on these parts.
