MC9S08QE32CWL - 8-Bit 50MHz 32KB Flash MCU | NXP | 28-SOIC
部品番号: MC9S08QE32CWL ✗ 生産終了MC9S08QE32CWL 概要
An S08 microcontroller is an 8-bit embedded-control architecture positioned between simple logic controllers and more complex 32-bit processors. It combines a CPU, flash program memory, RAM, timers, serial interfaces, analog conversion functions and communication peripherals in one integrated circuit. This integration allows a compact control board to execute firmware, acquire sensor information, drive an LCD and communicate with external equipment without requiring several discrete components.
The MC9S08QE32CWL provides 32 KB of flash memory, 50 MHz processing performance and a 28-SOIC package. Its integrated LCD driver and touch sensing support enable compact keypad-and-display products such as appliances, instrumentation panels and small controllers. The 8-bit architecture is appropriate for deterministic control loops, state machines and mixed analog/digital systems where a 32-bit processor would add unnecessary cost, power or software complexity.
The 28-SOIC package offers a familiar gull-wing surface-mount form with widely used 1.27 mm lead spacing. It is larger than the smallest QFN and DFN options but remains practical for prototypes, industrial controllers, meters and equipment where reworkability and inspection are important. Its operating features make it suitable for applications involving LCD feedback, touch-panel input, timers, serial communications and general embedded automation.
Typical uses include appliance control panels, compact industrial interfaces, digital meters, keypad modules, sensor-conditioning controllers and low-cost embedded products. A designer can use the integrated LCD and touch functions to reduce external circuitry and board area, while the 50 MHz S08 core provides enough throughput for responsive control logic and communication handling.
PCB implementation should preserve the exact 28-SOIC land pattern and follow the pin, decoupling, clock, reset and programming guidance in the manufacturer datasheet. Confirm the exact pin functions before assigning PCB nets because this page does not reproduce the complete pin-description table. For an end-of-life device, the primary design concern is long-term availability and firmware support rather than a change in the original electrical architecture.
This product page consolidates lifecycle information, exact pricing evidence, package details, replacement options and engineering considerations for the MC9S08QE32CWL. It is intended to accelerate sourcing and design review while keeping the critical distinction between a genuine drop-in replacement and a merely similar microcontroller explicit.
ドロップイン代替品: MC9S08QE32CWL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08QE32CWL (同一形状・フットプリント) — 相違点: Maximum Clock Frequency, Package, Series.
MC9S08QE16CWL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08QE8CWL
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MC9S08QE32CVL
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08QE32CAG
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08QE32CWL-T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08QE32CWL 最大定格&電気的特性
| Product Type | 8-bit S08 embedded microcontroller |
| 最大クロック周波数 | 50 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Program Memory Architecture | 32K x 8 |
| CPU Architecture | 8-bit HCS08 central processor unit |
| パッケージ | 28-pin SOIC, gull wing |
| Terminal Count | 28 terminals |
| Package Code | SOP |
| Package Shape | Rectangular |
| 実装タイプ | Surface mount |
| Temperature Grade | Industrial |
| Integrated LCD Driver | Yes |
| Touch Sensing | Yes |
| ADC | 12-bit ADC family identified in the reference manual |
| Real-Time Counter | S08RTCV1 identified in the reference manual |
| Clocking | Internal clock source with optional external reference clock |
MC9S08QE32CWL rectangular ピン配置ガイド
MC9S08QE32CWL (rectangular パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08QE32CWL.
詳細は データシート をご参照ください。
主な用途
MC9S08QE32CWL の用途: 6 件s: Appliance Control Panel, Compact Digital Meter, Industrial Sensor Interface, Keypad and Access Controller, Low-Cost Embedded Controller, Appliance Motor and Relay Control.
Appliance Control Panel
The MC9S08QE32CWL fits an appliance control panel because its 32 KB flash provides room for user-interface logic, operating tables and small update routines, while the integrated LCD driver and touch sensing reduce the number of external components. The 50 MHz 8-bit S08 core can service panel events, timers and motor or relay control tasks without requiring a higher-cost processor. Use the manufacturer pin table to map touch and LCD functions, and verify the panel's segment count and refresh requirements before committing the design. Its 28-SOIC package also remains straightforward to assemble and inspect compared with a very small leadless package.
おすすめ
Compact Digital Meter
For a compact digital meter, MC9S08QE32CWL combines a 50 MHz S08 processor, 32 KB flash and integrated LCD drive in a single 28-SOIC device. This supports measurement acquisition, calibration constants, display formatting and button input in a compact board without a separate display driver. The 32 KB memory provides substantially more room than an 8 KB MCU for calibration tables and diagnostic code. The designer should confirm the required LCD segment count, analog input arrangement and timing behavior in the manufacturer datasheet, then size decoupling and route sensitive analog signals away from switching nodes.
おすすめ
Industrial Sensor Interface
MC9S08QE32CWL is appropriate for a small industrial sensor interface that must acquire analog inputs, apply calibration, present local status and communicate with a controller. Its 12-bit ADC family and 50 MHz processing rate provide useful headroom for filtering and control calculations, while 32 KB flash can hold calibration tables and field diagnostics. The S08 peripheral set should be checked against the chosen sensors and communication topology. For industrial deployment, pay particular attention to the device's specified temperature limits, grounding, input protection and separation between analog and digital return paths.
おすすめ
Keypad and Access Controller
The MC9S08QE32CWL can implement a compact keypad, credential-entry or access-control module using its touch-sensing resources and integrated LCD driver. The 50 MHz S08 core can scan inputs, debounce contacts, update a display and manage a local event log, while 32 KB flash supports firmware, authorization tables and configuration data. Its 28-SOIC package is useful when a repairable or visually inspectable assembly is preferred over a leadless device. Security designs should add the required authentication and event-protection functions rather than treating the touch controller as a complete access-control solution.
おすすめ
Low-Cost Embedded Controller
The MC9S08QE32CWL suits a low-cost embedded controller for products that need more than basic logic but do not require a 32-bit application processor. The 8-bit architecture simplifies real-time state-machine implementation, and the 32 KB flash provides sufficient room for local firmware while the 50 MHz clock allows responsive peripheral handling. It is especially relevant to legacy product maintenance where the software toolchain, register organization and peripheral setup are already familiar. During lifecycle planning, evaluate long-term sourcing and software support alongside the component's electrical fit rather than starting a redesign solely to replace this end-of-life device.
おすすめ
Appliance Motor and Relay Control
For appliance motor or relay control, MC9S08QE32CWL can execute timing sequences, monitor inputs and coordinate a local user interface from one 28-SOIC device. Its 50 MHz S08 performance leaves processing margin for debounce logic, protection checks and fault-state transitions, while 32 KB flash accommodates operating sequences and diagnostic data. External transistors, isolation and protection components remain necessary because the MCU does not directly replace power-stage hardware. Validate timing and current limits in the complete motor circuit, and keep high-current switching paths away from sensitive analog and LCD connections.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08QE32CWL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08QE16CWL | MC9S08QE8CWL | MC9S08QE32CVL | MC9S08QE32CAG | MC9S08QE32CWL-T |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| CPU Architecture | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 | 8-bit HCS08 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 16 KB | 8 KB | 32 KB | 32 KB | 32 KB |
主な差別化要因
- Four times the flash memory of the reduced-memory QE8 candidate (vs MC9S08QE8CWL)
- Twice the flash memory of the QE16 candidate (vs MC9S08QE16CWL)
- Same 50 MHz S08 processing class in same-family alternatives (vs MC9S08QE32CVL)
設計ノート
Route the 28-SOIC footprint from the manufacturer package drawing and follow its pin numbering exactly. Keep programming and debug access reachable, provide the specified reset network, and place required decoupling capacitors close to the corresponding supply pins. Because the exact pin descriptions are not reproduced on this page, use the manufacturer pin table when assigning LCD, touch, clock, analog and communication nets rather than inferring their functions from neighboring pins.
Separate analog measurement paths from LCD drive, switching-control and digital interface routing. Use a continuous ground reference where the board construction permits it, keep touch inputs away from high-current switching paths, and follow the datasheet's recommended input filtering. The integrated LCD and touch functions reduce external circuitry, but their accuracy can still be affected by poor grounding, long sensor traces or adjacent power-stage currents. Review the completed layout against the manufacturer's application guidance.
Do not treat every MC9S08QE family member as a drop-in replacement. The QE16 and QE8 alternatives have less flash memory, and suffix changes can alter ordering or temperature-grade conditions. Before substitution, compare the manufacturer ordering table, complete pin assignments, memory size, LCD resources, touch channels, clock limits and operating temperature range. For this end-of-life device, request a lot-specific availability and traceability statement before changing the approved BOM.
コンプライアンス情報
The manufacturer product page identifies the device as end of life but does not establish the requested compliance statuses in the available source material.