MC9S08SH8MWJ - 40MHz 8-Bit 8KB Flash MCU | NXP
部品番号: MC9S08SH8MWJ ✗ 生産終了MC9S08SH8MWJ 概要
An 8-bit microcontroller is a programmable semiconductor that executes a central processing unit core and embedded peripherals from a compact integrated circuit. The S08 architecture belongs to the HCS08 family and is intended for embedded control tasks requiring modest processing bandwidth, deterministic peripheral operation, and low system complexity. MC9S08SH8MWJ targets applications in industrial controls, consumer equipment, motor-related modules, and simple embedded products where an 8 KB flash footprint is sufficient.
The principal device characteristics are a 40 MHz S08 CPU, 8 KB of flash program memory, and 512 bytes of RAM. Product listings also identify the device as an 8-bit CISC microcontroller with 3.3 V and 5 V operation. Its 20-pin SOIC package supports conventional PCB assembly and provides a practical upgrade path within suitably pin-compatible S08SH designs. The S08SH family was introduced as a low-end option for applications associated with the 5 V operating range.
Integrated resources make the MCU useful without requiring a separate external processor. The device family supports interrupt and reset handling, timers, serial communication, and analog conversion functions. Published family information describes a 12-channel, 10-bit ADC with a 2.5-second conversion time and automatic comparison capability. Individual peripheral availability, interrupt-vector locations, and electrical limits should be confirmed against the pin description and feature tables in the NXP datasheet before schematic capture.
Typical designs include small motor controllers, appliance controls, sensor-conditioning systems, communication modules, and compact user-interface equipment. The 8 KB program-memory limit makes code footprint and library selection important considerations. A compiler, debugger, programmer, and the correct S08 family device definition should be confirmed before committing to a new design or migrating existing firmware.
When laying out a board, route the exposed programming and communication signals away from sensitive analog inputs, provide clean local supply decoupling, and follow the manufacturer’s recommended pin connections. Because MC9S08SH8MWJ is marked end of life on the NXP product page, production planning should account for lifecycle risk, availability constraints, and qualification of any pin-compatible replacement before design release.
This page combines the product’s principal architecture, memory, package, lifecycle, and sourcing details with practical design guidance, application fit criteria, and a structured assessment of replacement constraints. It also distinguishes confirmed device attributes from parameters that must be obtained from the official technical documentation.
ドロップイン代替品: MC9S08SH8MWJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMC9S08SH8MWJ 最大定格＆電気的特性
| Microcontroller Type | 8-bit S08 CISC microcontroller |
| CPU Core | S08 core |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| RAM | 512 bytes |
| 電源電圧 | 3.3 V to 5 V |
| パッケージ | 20-pin SOIC |
| ピン数 | 20 pins |
| 実装タイプ | Surface mount |
| ADC Resolution | 10 bits |
| ADC Channel Count | 12 channels |
| ADC Conversion Time | 2.5 s |
| Instruction Set | HCS08 instruction set with BGND instruction |
| Interrupt and Reset Sources | Up to 32 sources |
| Operating Voltage Class | 5 V application range |
| ライフサイクル状態 | End of life |
MC9S08SH8MWJ 20-pin soic ピン配置ガイド
MC9S08SH8MWJ (20-pin soic パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08SH8MWJ.
詳細は データシート をご参照ください。
主な用途
MC9S08SH8MWJ の用途: 6 件s: Small Industrial Control Module, Appliance User Interface Controller, Low-Cost Motor Control Interface, Battery-Powered Sensor Node, Communication Gateway Interface, Analog Monitoring Controller.
Small Industrial Control Module
The MC9S08SH8MWJ is suitable for compact control modules that monitor discrete inputs and operate relays, indicators, or small actuators. Its 40 MHz S08 core provides useful timing headroom for control routines, while the 20-pin SOIC package keeps the footprint manageable. The 8 KB flash limit requires disciplined interrupt handling and modest library use, and the 512-byte RAM demands careful buffer allocation. A 3.3 V or 5 V rail architecture can simplify industrial peripheral interfacing, subject to grounding and surge requirements.
おすすめ
Appliance User Interface Controller
The MC9S08SH8MWJ can manage buttons, indicators, and simple display-related logic in a cost-sensitive appliance controller. Its 8-bit S08 core is appropriate for state-machine-driven interfaces, and the 40 MHz clock supports responsive keypad or panel scanning. With 8 KB of flash, applications should avoid oversized frameworks and place display rendering or complex graphics in dedicated hardware. The 20-pin SOIC footprint also supports panel-layout reuse when the exact peripheral mapping matches.
おすすめ
Low-Cost Motor Control Interface
The MC9S08SH8MWJ can serve as the supervisory controller for a small motor-control subsystem, handling commands, interlocks, fault flags, and communication with a dedicated power stage. Its 40 MHz S08 core is capable of deterministic supervisory tasks, although it should not be assumed to replace a dedicated high-performance motor controller. The 8 KB program-memory limit favors concise control code, while the 512-byte RAM is most useful for status structures rather than large motion buffers.
おすすめ
Battery-Powered Sensor Node
The MC9S08SH8MWJ fits low-duty-cycle sensor nodes that periodically read inputs, apply basic filtering, and transmit measurements. Its S08SH family supports low-power operating modes, making power-conscious firmware possible, but actual sleep duration and wake behavior must be confirmed in the NXP documentation. The 3.3 V and 5 V operating range supports common sensor ecosystems, while only 512 bytes of RAM requires streaming-oriented data handling.
おすすめ
Communication Gateway Interface
The MC9S08SH8MWJ can act as a small protocol gateway or protocol-conversion endpoint when the system requires an 8-bit MCU to collect commands, format responses, and manage status indicators. Its 40 MHz operating rate provides timing margin for interrupt-driven communication, but protocol throughput depends on the available S08 peripherals and bus timing. The 8 KB flash and 512-byte RAM are suitable for lightweight framing and state management, not large protocol stacks or buffered file transfer.
おすすめ
Analog Monitoring Controller
The MC9S08SH8MWJ is applicable to compact analog-monitoring equipment because the S08SH family includes a 12-channel, 10-bit ADC with automatic comparison capability. It can sample board-level voltages, enforce thresholds, and report events to a host or operator interface. The stated 2.5-second conversion time makes the ADC better suited to slow-changing monitoring than high-rate waveform acquisition. Firmware should calibrate the 10-bit readings and account for the device’s limited 8 KB code space.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08SH8MWJ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-pin SOIC |
| CPU Architecture | 8-bit S08 CISC |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 8 KB |
| RAM | 512 bytes |
| Operating Voltage | 3.3 V to 5 V |
| ADC | 12-channel, 10-bit |
| Lifecycle Status | End of life |
| Mounting Type | Surface mount |
主な差別化要因
- Compact 20-pin implementation （vs No verified drop-in alternative)
- 40 MHz control headroom （vs No verified drop-in alternative)
- Integrated monitoring capability （vs No verified drop-in alternative)
設計ノート
Use the exact 20-pin SOIC land pattern and pin numbering defined by the NXP package drawing. Place the MCU close to its supply bypass capacitor and programming interface, and route clock and reset signals away from switching nodes. Because the package exposes both power and signal connections in a compact outline, verify solder-clearance, paste, and assembly requirements with the board manufacturer rather than scaling a generic SOIC footprint.
Design the 3.3 V or 5 V supply rail around the electrical limits and decoupling recommendations in the NXP datasheet. Place the required input and output capacitors at their specified pins with short, low-loop traces. Confirm startup behavior, brownout requirements, and maximum operating current for every attached peripheral so that a peak peripheral load does not cause regulator droop or unreliable controller reset.
Firmware sizing must account for only 8 KB of flash and 512 bytes of RAM. Avoid heavyweight middleware, deep call chains, and multiple large buffers, and measure stack headroom at the deepest interrupt path. The 10-bit ADC should be treated as suitable for slower monitoring rather than high-bandwidth acquisition, particularly when the stated conversion time is 2.5 seconds. Validate reset, clock, and peripheral assignments against the official pin table.
Separate analog sensing paths from programming, debug, and digital switching signals. Return analog ground and digital ground according to the system’s current-return plan, and keep sensor traces short and away from high-current edges. If the ADC is used, provide stable reference and supply conditions, sample only after the required settling interval, and calibrate offset or gain in firmware. These measures are especially important in compact boards where switching and sensing paths may compete for space.
コンプライアンス情報
No explicit environmental or material-compliance declarations are included in the product information. The NXP product page identifies the device as end of life; a formal product change, discontinuation, or material-declaration document should be requested before final qualification.