MCF5472ZP200 - ColdFire V4E 32-Bit MPU 200MHz 388-PBGA | NXP
部品番号: MCF5472ZP200 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $48.5 | $48.50 |
| 10 | $43.65 | $436.50 |
| 100 | $38.8 | $3,880.00 |
| 500 | $35.2 | $17,600.00 |
| 1,000 | $31.45 | $31,450.00 |
MCF5472ZP200 概要
A microprocessor (MPU) is the central processing unit of an embedded system implemented as a standalone integrated circuit. The ColdFire V4E architecture sits within the broader ColdFire family, which derives from the original Motorola 68000 instruction set; ColdFire V4E adds a hardware MMU and FPU for full Unix/Linux-capable systems. Positioned above microcontrollers (which integrate memory+peripherals on die), MPUs like the MCF5472ZP200 rely on external SDRAM and Flash, and they form the highest tier of semiconductor processors used in networking, industrial, and point-of-sale equipment.
Key features include a 200 MHz ColdFire V4E core with MMU, dedicated FPU, a 32 KB instruction cache and 32 KB data cache, dual 32-bit DDR SDRAM controllers, dual 10/100 Ethernet MACs, PCI v2.2 bus, four DMA channels, and a wide range of serial interfaces including UARTs, I2C, and SSI. The ROMless configuration allows boot from external Flash, while the 388-PBGA package supplies abundant I/O for high-bandwidth designs. The integrated MMU enables full operating system support, including Linux and various RTOS options.
Architecturally, the V4E core provides a Variable-Length RISC Encoding (VLE) instruction set that increases code density while preserving 32-bit performance. The integrated DDR controller with dual banks supports modern memory architectures required for image processing, packet inspection, and other memory-intensive workloads, while the dual Ethernet and PCI interfaces are ideal for multi-protocol network appliance designs.
Typical applications include industrial networking gateways, networked printers and MFPs, point-of-sale terminals, factory automation controllers, networked storage adapters, and high-end embedded routers. The combination of Linux-capable MMU plus hardware FPU makes it especially suitable for protocols involving on-the-fly data transformation and cryptographic acceleration routines running on the CPU.
When designing with this part, ensure the 388-BGA PCB layout uses 0.8 mm or finer pitch fanout with appropriate via-in-pad or dog-bone escape routing, and provide a minimum of 6 PCB layers to maintain signal integrity for the DDR SDRAM and Ethernet interfaces. Confirm thermal headroom under full Ethernet+IR200+PCI traffic; the device can dissipate several watts under sustained load.
This page synthesizes distributor pricing, drop-in ColdFire-family alternatives, and practical 388-BGA layout guidance not consolidated on the manufacturer product page.
ドロップイン代替品: MCF5472ZP200 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCF5472ZP200 （同一形状・フットプリント） — 相違点: Package, Core Processor, FPU, MMU, Program Memory Type.
クイック比較ツール — 並列比較する代替部品を選択:
MCF5474ZP200
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCF5475ZP200
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCF5471ZP200
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCF5472ZP200R
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCF5472ZP200 最大定格＆電気的特性
| Core Architecture | ColdFire V4E |
| Core Type | 32-Bit RISC microprocessor (MPU) |
| Maximum Core Frequency | 200 MHz |
| MMU | Yes (hardware Memory Management Unit) |
| FPU | Yes (hardware Floating Point Unit) |
| Program Memory | ROMless (external boot Flash required) |
| Instruction Cache | 32 KB |
| Data Cache | 32 KB |
| Ethernet | Dual 10/100 MAC |
| PCI Bus | PCI v2.2 compliant |
| DDR SDRAM Controller | Dual-bank, 32-bit |
| DMA Channels | 4 |
| パッケージ | 388-PBGA (27x27 mm) |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
MCF5472ZP200 388-pbga (27x27 mm) ピン配置ガイド
MCF5472ZP200 (388-pbga (27x27 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCF5472ZP200.
詳細は データシート をご参照ください。
主な用途
MCF5472ZP200 の用途: 6 件s: Industrial Networking Gateway, Networked Printer / MFP Controller, Point-of-Sale (POS) Terminal, Factory Automation Controller, Networked Storage Adapter (NAS/iSCSI), High-End Embedded Router.
Industrial Networking Gateway
The MCF5472ZP200's dual 10/100 Ethernet MACs and PCI v2.2 bus make it well-suited for industrial protocol gateways that translate between Ethernet and fieldbuses. Its 200 MHz ColdFire V4E core with hardware FPU handles real-time packet filtering, encryption, and protocol conversion with headroom. Designers typically pair it with DDR SDRAM and a managed Ethernet switch on the PCI bus, while the MMU enables embedded Linux for routing and firewall stacks.
おすすめ
Networked Printer / MFP Controller
Inside a multifunction printer, the MCF5472ZP200 acts as the main controller, driving the print engine over PCI, the scanner over USB or SSI, and the user interface via external peripherals. The 200 MHz V4E core plus FPU accelerates image rasterization and JPEG rendering without offloading to a separate DSP. The ROMless boot from external Flash allows large firmware images for printer languages and is well-matched to commercial-grade thermal and supply budgets.
おすすめ
Point-of-Sale (POS) Terminal
POS terminals need deterministic response, secure payment processing, and flexible I/O for peripherals such as printers, cash drawers, and card readers. The MCF5472ZP200 delivers 200 MHz ColdFire V4E compute with hardware FPU for cryptographic and PCI-PTS workloads, plus dual Ethernet for IP backhaul and PCI for legacy peripherals. The MMU and Linux support simplify development of multi-tasking payment stacks on a stable, long-lived silicon platform.
おすすめ
Factory Automation Controller
Factory automation controllers coordinate PLCs, motion drives, and operator HMIs over Ethernet/IP, Modbus TCP, or proprietary fieldbuses. The MCF5472ZP200's dual Ethernet ports support redundant ring topologies while the PCI bus accepts motion-control daughter cards. The hardware FPU accelerates PID loop math and trajectory planning executed by a real-time OS, and the 388-PBGA package's thermal envelope is well-suited to industrial chassis.
おすすめ
Networked Storage Adapter (NAS/iSCSI)
Small-business NAS and iSCSI adapters depend on a CPU capable of running software RAID, file systems, and TCP/IP stacks simultaneously. The MCF5472ZP200's MMU plus FPU enable embedded Linux to manage SATA or SCSI peripherals on PCI while pushing wire-speed gigabit throughput on Ethernet. The dual-bank DDR controller sustains burst transfers during rebuilds and scrubbing operations typical of entry-level RAID.
おすすめ
High-End Embedded Router
Embedded routers used in branch offices and industrial sites require a CPU that can route packets, run VPN tunnels, and host a web management interface. The MCF5472ZP200 with hardware FPU and MMU is well-matched to embedded Linux routing daemons and IPsec software acceleration. Dual Ethernet supplies WAN/LAN segmentation, and the PCI bus accepts optional wireless or cellular modules for branch connectivity.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCF5472ZP200 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCF5474ZP200 | MCF5475ZP200 | MCF5471ZP200 | MCF5472ZP200R |
|---|---|---|---|---|---|
| Package | 388-PBGA (27x27 mm) | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V4E |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| MMU / FPU | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
| Ethernet MACs | Dual 10/100 | Dual 10/100 | Dual 10/100 | Dual 10/100 | Dual 10/100 |
| PCI Bus | PCI v2.2 | PCI v2.2 | PCI v2.2 | PCI v2.2 | PCI v2.2 |
| ROM / Flash | ROMless (external boot) | ROMless (external boot) | ROMless (external boot) | ROMless (external boot) | ROMless (external boot) |
| Lifecycle | NRND | NRND | NRND | NRND | NRND |
主な差別化要因
- Hardware MMU and FPU for Linux/RTOS workloads （vs MCF54455CVR200)
- Dual 10/100 Ethernet plus PCI v2.2 in a single 388-BGA （vs MCF5471ZP200)
- Lower-cost V4E sibling with same BGA footprint （vs MCF5474ZP200)
設計ノート
The 388-PBGA at 27x27 mm requires a minimum 6-layer PCB with continuous ground and power planes directly beneath the BGA. Use 0.8 mm-pitch fanout with microvias or via-in-pad for the inner rows; dog-bone fanout to the outer rows is acceptable. Keep DDR SDRAM traces length-matched within 50 mils and impedance-controlled to 50 ohms single-ended. Provide at least 4 decoupling capacitors per power rail (0.1 uF, 1 nF, 10 uF, 100 uF) placed as close to the balls as possible.
Estimated: At 200 MHz core with both Ethernet MACs active and PCI bus traffic, typical core power dissipation is 1.5-2.5 W. The 388-PBGA package theta_JA is approximately 25-30 C/W on a 6-layer JEDEC test board, giving a 50-75 C junction temperature rise above ambient. For sealed enclosures with limited airflow, derate by 25% and consider a thermal pad or coin heatsink. Always validate with a thermocouple on the top-side package center under worst-case workload.
Do not assume the MCF5472ZP200 is pin-compatible with non-ZP200 ColdFire variants - different ZP/VR suffixes may have different ball maps. Always verify the BSDL/IBIS model and Reference Manual (MCF547XRM) against your schematic before board fab. ColdFire V4E parts require a specific reset and PLL configuration sequence; consult the datasheet and NXP application notes before bringing the part out of reset. Migration to newer i.MX parts requires a new PCB layout - they are NOT drop-in replacements.
DDR SDRAM traces must be length-matched within tight tolerances (typically 25-100 mils depending on byte lane). Use series termination resistors on PCI bus signals at the MCF5472ZP200 end. Provide proper Ethernet PHY M differential impedance of 100 ohms on the MDI pairs, and place the magnetics within 25 mm of the PHY. Avoid routing high-speed signals across plane splits.
コンプライアンス情報
RoHS and lead-free compliance verified through distributor product listings; halogen-free status not confirmed in the provided data. Not AEC-Q100 qualified - the part targets commercial and industrial networking, not automotive.
