MCIMX53EVK - i.MX53 ARM Cortex-A8 Dev Kit | NXP Semiconductors
部品番号: MCIMX53EVK ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MCIMX53EVK 概要
A development kit (EVK) is a manufacturer-curated reference board that combines a target application processor, validated power tree, expansion headers, display interfaces, and pre-loaded demo firmware. It allows firmware engineers, hardware engineers, and system architects to evaluate the host processor, characterize peripherals, and benchmark software frameworks (Linux, Android, WinCE) before committing to a custom PCB layout. The kit category sits between evaluation modules (system-on-modules) and full product reference designs and is the typical first purchase for any new i.MX project.
Key features of the MCIMX53EVK include the i.MX53 ARM Cortex-A8 SoC at up to 1 GHz, DDR2/DDR3 memory support, an LVDS dual-display interface, hardware video accelerators (VPU, GPU2D/3D), 10/100 Ethernet, USB 2.0, SATA, HDMI, and an audio codec. Expansion is provided through the i.MX53-compatible board-to-board connectors, a debug UART, and JTAG for ARM CoreSight trace. The kit ships with a Linux BSP and documentation for quick out-of-box demo bring-up.
The platform targets automotive infotainment, industrial HMI panels, medical patient-interface displays, and rich multimedia appliances. It demonstrates how to terminate the i.MX53's high-speed signal lanes, sequence its multiple power rails, and route the LVDS/HDMI video outputs. Designers using the kit as a starting reference can directly copy sections of its schematic into their own carrier board, shortening electrical validation cycles.
When designing with this kit, plan for the higher-than-typical thermal envelope of the i.MX53 SoC and the careful decoupling required by its multi-rail power tree. Engineers typically use the EVK to validate the BSP and software stack before transitioning to a custom board or a System-on-Module.
ドロップイン代替品: MCIMX53EVK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MCIMX6UL-EVK
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX8M-EVK
✅ ドロップイン📋 参考代替品（カタログ未掲載）
SABRE Board
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX53-START
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32MP157A-DK1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX53EVK 仕様（メーカー公開）
| Product Type | Development Kit / Evaluation Platform |
| Host Processor | i.MX53 ARM Cortex-A8 SoC |
| Core Architecture | ARM Cortex-A8 |
| Memory Support | DDR2 / DDR3 |
| Video Output | LVDS dual-display, HDMI |
| Graphics Accelerator | i.MX53 GPU2D/3D |
| Video Accelerator | VPU (hardware video encode/decode) |
| Ethernet | 10/100 Mbps |
| USB | USB 2.0 |
| Storage Interface | SATA |
| Audio | On-board audio codec |
| Debug Interface | JTAG (ARM CoreSight) + Debug UART |
| Expansion | i.MX53 board-to-board connectors |
| Supported OS | Linux BSP, Android, WinCE |
| Kit Form Factor | Standalone evaluation board |
| Min. Order Quantity | 1 |
| Min. Package Quantity | 1 |
MCIMX53EVK インターフェースとコネクタ
MCIMX53EVK は、メーカーが公開している以下のインターフェースとコネクタを備えています: Ethernet, USB。拡張ヘッダーのピン配置、コネクタのピン番号、電気的制限はメーカーのドキュメントで定義されています。
| Ethernet | 10/100 Mbps |
| USB | USB 2.0 |
詳細は メーカー資料 をご参照ください（拡張ヘッダーのピン配置とコネクタのピン番号の詳細）。
主な用途
MCIMX53EVK の用途: 6 件s: Automotive Infotainment Prototyping, Industrial HMI Panel Development, Medical Patient Interface Display, Rich Multimedia Appliances, Embedded Linux BSP Evaluation, Connected Edge Gateway Prototype.
Automotive Infotainment Prototyping
The MCIMX53EVK's i.MX53 SoC combines an ARM Cortex-A8 core at up to 1 GHz with a hardware VPU for video encode/decode and a 2D/3D GPU, making the kit a fast starting point for automotive infotainment head-unit prototypes. Engineers can validate dual-display LVDS pipelines for instrument cluster plus central-stack layouts and characterize the HDMI output for rear-seat entertainment. The kit runs the Linux BSP that NXP ships for production i.MX53 automotive designs, allowing software reuse between the EVK reference and the final head-unit. Power-rail sequencing is already implemented on the board, eliminating one of the most error-prone aspects of i.MX53 hardware bring-up.
おすすめ
Industrial HMI Panel Development
The MCIMX53EVK's LVDS dual-display interface and integrated 2D/3D GPU make it well suited to evaluating industrial human-machine interface (HMI) panels that require a primary control display plus a secondary status panel. Designers can prototype Qt- or Weston-based touch-screen UI stacks on the kit before committing to a custom carrier board, and use the validated power tree as a reference for the production design. The i.MX53's hardware video accelerators enable smooth handling of HMI animations and video tutorials. The EVK's board-to-board expansion connectors expose the i.MX53 signals needed to wire a custom touch controller and backlight driver.
おすすめ
Medical Patient Interface Display
The MCIMX53EVK gives medical-device OEMs a proven reference for patient-interface displays such as infusion-pump screens, patient-monitor UI panels, and bedside infotainment terminals. The i.MX53 SoC provides the multimedia performance required for animated UI graphics while keeping power consumption compatible with battery-backed medical devices. The LVDS and HDMI outputs simplify integration with both integrated LCD panels and external diagnostic displays. NXP's long-term Linux BSP support allows medical OEMs to maintain a validated software stack over multi-year product lifecycles. Engineers can also use the kit to characterize touch latency and display response for IEC 60601-1 user-interface verification.
おすすめ
Rich Multimedia Appliances
The MCIMX53EVK is a strong starting point for multimedia appliances such as digital signage players, set-top box prototypes, and smart-home control panels. The hardware VPU accelerates H.264 decode for signage video loops while the integrated GPU handles UI composition, freeing the Cortex-A8 core for application logic. The HDMI output lets designers connect the kit directly to a commercial display for evaluation, and the SATA interface supports local content caching on an SSD. NXP's Linux BSP includes optimized multimedia frameworks (gstreamer with VPU plugins) that engineers can prototype directly on the EVK before scaling to production hardware.
おすすめ
Embedded Linux BSP Evaluation
The MCIMX53EVK is the canonical platform for evaluating NXP's i.MX53 Linux Board Support Package. Firmware engineers can boot the latest mainline kernel and U-Boot on the kit to validate driver support for the SoC's peripherals before targeting production hardware. The kit's JTAG (ARM CoreSight) headers enable kernel debugging with commercial tools, and the debug UART exposes the boot console for early-stage bring-up. Because the kit's schematics are published, BSP-level porting from the EVK to a custom carrier board is a well-documented exercise in the NXP community.
おすすめ
Connected Edge Gateway Prototype
The MCIMX53EVK combines 10/100 Ethernet, USB 2.0, and SATA with the i.MX53's application processor, providing a platform for prototyping connected edge gateways that aggregate sensor data and serve local UI. Engineers can run Yocto-built Linux images with container runtimes on the kit, evaluate TLS libraries against the hardware crypto accelerators, and validate OTA update flows before product launch. The board-to-board expansion connectors expose GPIOs, I2C, SPI, and UART for connecting industrial sensor modules. Once the architecture is validated on the EVK, the design can be transferred to a lower-cost i.MX6UL EVK or i.MX8M EVK for production.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCIMX53EVK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCIMX6UL-EVK | MCIMX8M-EVK | SABRE Board (i.MX6) | MCIMX53-START | STM32MP157A-DK1 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Package | Evaluation Kit (PCB) | Evaluation Kit (PCB) - same form factor class | Evaluation Kit (PCB) - same form factor class | Evaluation Kit (PCB) - same form factor class | Evaluation Kit (PCB) - same form factor class | Evaluation Kit (PCB) - same form factor class |
| Host Processor | i.MX53 ARM Cortex-A8 | i.MX6UL ARM Cortex-A7 | i.MX8M ARM Cortex-A53 + Cortex-M4 | i.MX6 ARM Cortex-A9 quad/dual | i.MX53 ARM Cortex-A8 (same) | STM32MP157 Cortex-A7 + Cortex-M4 |
| Core Architecture | ARM Cortex-A8 | ARM Cortex-A7 | ARM Cortex-A53 + Cortex-M4 | ARM Cortex-A9 | ARM Cortex-A8 (same) | ARM Cortex-A7 + Cortex-M4 |
| Video Output | LVDS dual-display + HDMI | LVDS + parallel RGB | HDMI 2.0 + MIPI-DSI | LVDS + HDMI | LVDS (subset) | HDMI + MIPI-DSI |
| Hardware Video Accelerator | Yes (VPU) | No VPU | Yes (VPU) | Yes (VPU) | Yes (VPU) | No dedicated VPU |
| Ethernet | 10/100 Mbps | 10/100 Mbps | Gigabit | Gigabit | 10/100 Mbps | Gigabit |
| Supported OS | Linux, Android, WinCE | Linux | Linux, Android | Linux, Android | Linux, Android, WinCE | Linux, OpenSTLinux |
| Min. Order Quantity | 1 | 1 | 1 | 1 | 1 | 1 |
主な差別化要因
- i.MX53 family with hardware VPU （vs MCIMX6UL-EVK)
- Mature NXP Linux BSP with long-term support （vs MCIMX8M-EVK)
- Same NXP i.MX ecosystem with cost-optimized BOM （vs STM32MP157A-DK1)
設計ノート
Estimated: The i.MX53 SoC requires multiple sequenced power rails (typically 1.0V core, 1.5V DDR, 1.8V LDO, 3.3V I/O). The MCIMX53EVK implements this sequencing on-board - reuse the EVK's PMIC configuration as the reference design for any custom carrier board. Skipping rail sequencing risks latch-up at power-up.
Estimated: At full CPU + GPU + VPU load, the i.MX53 SoC can dissipate 2-3 W. The MCIMX53EVK uses a passive heatsink footprint; production designs targeting continuous multimedia workloads should plan for either a small aluminum heatsink or thermal vias to an inner copper plane. Verify junction temperature with a thermocouple on the EVK before finalizing mechanical design.
When adapting the EVK schematics into a custom board, maintain the i.MX53 board-to-board connector pin map exactly if you want to reuse off-the-shelf display and camera modules validated against the EVK. Keep the LVDS lanes length-matched within the tolerance specified in the i.MX53 Hardware Development Guide; HDMI requires the standard 100-ohm differential impedance plus ESD protection on the connector.
Do not assume the EVK's BSP is automatically compatible with a custom carrier board - peripheral pin muxing on the i.MX53 is highly configurable and must be re-validated when GPIOs are reassigned. Also, the EVK's boot configuration (boot mode straps) must be mirrored or modified per the production board's boot media (NAND, eMMC, SD).
コンプライアンス情報
Compliance status was not present in the verified web data; treat as unknown. AEC-Q100 is not applicable to a development kit; consult the i.MX53 SoC datasheet for automotive-grade qualification status.
