MCP2515T-I/SOVAO - CAN 2.0B SPI Controller | Microchip
部品番号: MCP2515T-I/SOVAO ✓ 生産中MCP2515T-I/SOVAO 概要
A CAN controller is a specialized communications interface integrated circuit within the broader hierarchy of interface ICs, serial interface controllers, and network semiconductors. CAN, or Controller Area Network, is a deterministic, multi-master bus protocol designed for robust communication among distributed electronic systems. The MCP2515 family implements the protocol engine and mask-and-filter logic, while an external transceiver converts controller logic into the electrical CANH and CANL bus signals.
Key family features include support for CAN specification version 2.0B, standard and extended data frames, remote frames, programmable receive filters and masks, byte-oriented SPI communication, and time-triggered protocol support. The manufacturer describes the MCP2515 as pin and function compatible with the MCP2510 while adding faster throughput, data-byte filtering, and support for time-triggered protocols. The SOVAO ordering code identifies the industrial-temperature, 18-pin SOIC configuration used by this article.
Technically, the device separates CAN frame handling from the host microcontroller. The SPI interface provides a serial command path for configuration, mask, filter, transmit-buffer, receive-buffer, status, and interrupt operations. This architecture reduces the number of parallel connections required between a host processor and the CAN controller, although firmware must correctly manage buffering, arbitration loss, error states, interrupt sources, and bus timing before the device can participate reliably in a live network.
Typical uses include industrial sensor nodes, motor-control equipment, test instruments, robotic controllers, building-automation interfaces, and diagnostic systems. In these applications, a microcontroller or DSP configures the MCP2515, places frames into its transmit buffers, and services interrupts when frames are received or error conditions occur. A separate 3.3 V or 5 V CAN transceiver is still required because the controller does not directly drive the physical bus.
A key design consideration is separating the SPI traffic from the CAN bus interface and observing the voltage, timing, and reset requirements stated in the manufacturer datasheet. Board layout, grounding, transceiver selection, bus termination, and firmware acknowledgment handling can be as important as controller selection. The SOIC package is larger than modern leadless alternatives, but it supports straightforward assembly and inspection in prototype and low-to-medium-volume equipment.
This product data consolidates verified manufacturer and distributor references, package information, practical CAN design considerations, and pin-compatible ordering variants. It also distinguishes the controller from the external transceiver and explicitly identifies unavailable electrical values so procurement and engineering decisions are not based on unverified assumptions.
ドロップイン代替品: MCP2515T-I/SOVAO — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCP2515T-I/SOVAO （同一形状・フットプリント） — 相違点: Package, CAN Specification, Compatibility, Supported Frame Types, Frame Support.
MCP2515T-I/SO
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP2515T-E/SOVAO
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP2515-I/SOVAO
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP2515T-I/STVAO
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCP2515-E/STVAO
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP2515T-I/SOVAO 仕様
| Product Type | Stand-alone CAN controller |
| CAN Specification | CAN 2.0B |
| Host Interface | SPI |
| Supported Frame Types | Standard data, extended data, and remote frames |
| Temperature Grade | Industrial |
| パッケージ | 18-pin SOIC |
| Terminal Count | 18 terminals |
| Package Code | SOP |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| Controller Generation | Second-generation MCP2515 |
| MCP2510 Compatibility | Pin and function compatible |
| Filtering | Data-byte filtering |
| Time-Triggered Protocol Support | Supported |
MCP2515T-I/SOVAO rectangular ピン配置ガイド
MCP2515T-I/SOVAO (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MCP2515T-I/SOVAO.
詳細は データシート をご参照ください。
主な用途
MCP2515T-I/SOVAO の用途: 6 件s: Industrial Sensor Gateway, Robotic Motor-Control Network, Automotive Diagnostic Interface, Test and Measurement Instrument, Building Automation Controller, Embedded CAN Communication Module.
Industrial Sensor Gateway
The MCP2515T-I/SOVAO fits an industrial sensor gateway because it provides CAN 2.0B frame processing while exposing the host connection through SPI. A microcontroller can configure acceptance masks and filters, exchange standard or extended frames with remote sensors, and use receive or interrupt handling without dedicating numerous parallel GPIO lines. The 18-pin SOIC package is straightforward to assemble and inspect. The main design trade-off is that the controller requires an external 3.3 V or 5 V CAN transceiver, protection components, proper grounding, and firmware that handles arbitration loss, error states, and buffer status correctly.
おすすめ
Robotic Motor-Control Network
The MCP2515T-I/SOVAO is appropriate for a robotic motor-control network where a controller must exchange priority messages with motor drivers, sensors, and safety modules. CAN 2.0B support permits standard and extended identifiers, while the SPI interface keeps host wiring compact and leaves GPIO available for pulse-width modulation and other motor-control functions. Because the MCP2515 is not a physical-layer device, the design still needs an industrial-appropriate transceiver, bus termination, fault protection, and careful PCB return paths. Firmware must define arbitration behavior and prevent unsafe commands from being retransmitted after bus-off or reset events.
おすすめ
Automotive Diagnostic Interface
The MCP2515T-I/SOVAO can support an embedded diagnostic interface that bridges a host processor to a vehicle or equipment CAN network. Its industrial grade, CAN 2.0B protocol support, and ability to handle standard, extended, and remote frames suit centralized diagnostics and status reporting. The SPI interface allows the host to read status registers and interrupt sources while filters reduce unnecessary data traffic. However, automotive qualification and exact temperature limits must be verified for the target ordering code; a production design also needs a suitably qualified transceiver, isolation strategy, bus protection, EMC control, and validated diagnostic software.
おすすめ
Test and Measurement Instrument
The MCP2515T-I/SOVAO is useful in a CAN-capable oscilloscope, logger, analyzer, or automated test fixture that must communicate with embedded equipment. Standard and extended frame handling provides flexibility when different nodes use distinct identifier formats, while the SPI host interface supports high-level commands and status retrieval. The stand-alone architecture allows the instrument designer to select the transceiver, protection scheme, and isolation method independently of the controller. In practice, accurate timestamp association, overflow handling, and bus termination must be coordinated in firmware, and the controller's industrial grade should be checked against the instrument's ambient-temperature requirement.
おすすめ
Building Automation Controller
The MCP2515T-I/SOVAO can serve in a building-automation controller that links HVAC equipment, access controls, environmental sensors, and service interfaces over a CAN segment. The SPI host connection keeps the controller interface compact, while programmable acceptance masks and filters help isolate relevant traffic on a multi-node network. The 18-pin SOIC package is readily assembled in conventional industrial-control hardware. A reliable implementation requires an external transceiver, robust grounding, surge protection for long wiring runs, suitable bus topology and termination, and software that accounts for node startup order, duplicate identifiers, and recovery after error or power interruptions.
おすすめ
Embedded CAN Communication Module
The MCP2515T-I/SOVAO fits an embedded communication module that gives a host processor access to a CAN network through SPI without requiring a host-integrated CAN peripheral. Its second-generation MCP2515 architecture supports data-byte filtering and time-triggered protocol functions, while CAN 2.0B compatibility permits common standard and extended frame formats. This is especially useful for compact control boards whose processor already handles communication through SPI but lacks a native CAN controller. The module designer must add a transceiver, define connector pinout and isolation, validate bit timing against the selected network, and implement robust reset, sleep, standby, and error-recovery behavior in firmware.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP2515T-I/SOVAO — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP2515T-I/SO | MCP2515T-E/SO | MCP2515-I/SOVAO | MCP2515T-I/STVAO | MCP2515-E/STVAO |
|---|---|---|---|---|---|---|
| Package | 18-pin SOIC | 18-pin SOIC | 18-pin SOIC | 18-pin SOIC | 18-pin SOIC | 18-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Controller Type | Stand-alone CAN controller | Stand-alone CAN controller | Stand-alone CAN controller | MCP2515 CAN controller | MCP2515 CAN controller | MCP2515 CAN controller |
| CAN Specification | CAN 2.0B | CAN 2.0 | CAN 2.0 | CAN 2.0B family | CAN 2.0B family | CAN 2.0B family |
| Host Interface | SPI | SPI | SPI | SPI family interface | SPI family interface | SPI family interface |
| Supported Frame Types | Standard, extended data, and remote frames | MCP2515 family frame support | MCP2515 family frame support | Standard and extended data and remote frames | Standard and extended data and remote frames | Standard and extended data and remote frames |
| Filtering | Data-byte filtering | MCP2515 family filtering | MCP2515 family filtering | MCP2515 family filtering | MCP2515 family filtering | MCP2515 family filtering |
| Time-Triggered Protocol Support | Supported | Supported in MCP2515 family | Supported in MCP2515 family | Supported in MCP2515 family | Supported in MCP2515 family | Supported in MCP2515 family |
| Physical-Layer Transceiver | External transceiver required | External transceiver required | External transceiver required | External transceiver required | External transceiver required | External transceiver required |
主な差別化要因
- Industrial-grade selection within the MCP2515 family （vs MCP2515T-E/SO)
- Direct ordering-code match within the same 18-pin SOIC family （vs MCP2515-I/SOVAO)
- Established CAN 2.0B and SPI interface （vs MCP2515-E/STVAO)
- Host-compatible SPI architecture reduces parallel GPIO demand （vs MCP2515T-I/SO)
設計ノート
Keep the SPI bus and controller supply return paths compact, and place the required bypass capacitors close to their associated pins according to the manufacturer layout guidance. The CANH and CANL connection should remain outside the digital SPI region and be routed as a controlled differential pair. Maintain a low-impedance ground reference between the controller, external transceiver, and protection network; excessive loop area or a split ground plane can increase radiated emissions and make the bus less robust in industrial environments.
Select the external CAN transceiver for the same supply strategy and logic-level compatibility as the MCP2515T-I/SOVAO, and verify its operating range against the manufacturer's controller limits. The verified distributor material for the closely related MCP2515T-I/SO identifies 3.3 V and 5 V operation, but the target-specific supply limits were not included in the supplied results. Confirm absolute maximum voltage, sleep and standby behavior, startup sequencing, and decoupling requirements directly from the official MCP2515 family data sheet before release.
Do not treat the MCP2515T-I/SOVAO as a self-sufficient CAN transceiver. The controller processes frames and communicates with the host through SPI, while an external transceiver supplies CANH and CANL. Firmware must also manage transmit-priority arbitration, rollover and overflow conditions, error counters, interrupt sources, and recovery after reset or bus-off. Validate frame timing against the slowest node, the selected transceiver propagation delay, and the oscillator tolerance rather than configuring timing from nominal rate alone.
Terminate only the two endpoints of the CAN bus and avoid unnecessary stubs, especially when adding test points or long branch wiring. Place surge protection close to external connectors and keep it outside high-current switching paths. Because the target is intended for industrial environments, evaluate conducted and radiated emissions with the final transceiver, connector, enclosure, cable configuration, and firmware operating state; a controller-only bench test cannot establish compliance for the completed product.
コンプライアンス情報
The supplied verified excerpts identify the target as an industrial-temperature MCP2515 CAN controller but do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields therefore remain unknown rather than being inferred from the manufacturer.
