MCP3551-E/SN - 22-Bit Low-Power Sigma-Delta ADC | Microchip
部品番号: MCP3551-E/SN ✓ 生産中MCP3551-E/SN 概要
A sigma-delta ADC is a voltage-regulator and signal-conversion category within the broader ADC and data-converter hierarchy. Its modulator and digital filter shape quantization noise away from the signal band, allowing high resolution and low noise without requiring a high-speed flash or successive-approximation converter. The MCP3551 family uses fully differential inputs, making it suitable for bridge sensors, sensor interfaces, and other measurement systems where common-mode noise and ground references must be controlled carefully.
The MCP3551-E/SN is positioned for precision measurement rather than high-throughput sampling. Its 22-bit resolution, low-power operation, internal oscillator, and differential input architecture support compact industrial and process-control equipment. The listed 14 sps operating rate indicates that it is intended for slowly changing or low-bandwidth signals, such as temperature, pressure, load-cell, and chemical-sensor outputs, rather than waveform capture or fast closed-loop control.
The device uses a serial interface and is identified in distributor listings as a one-channel ADC with SPI communication. The 8-pin SOIC package provides a small-footprint surface-mount option, while the -40 C to +125 C temperature range supports industrial equipment and extended-temperature environments. The automotive AEC-Q100 designation appears in the supplied Arrow listing, but the exact qualification scope and grade should be confirmed against the manufacturer documentation before automotive release.
For new layouts, use the MCP3551-E/SN as the reference part and verify the differential input network, reference voltage, digital interface, and grounding strategy against the manufacturer datasheet. Because the supplied web data does not provide the complete pin-level definitions, input ranges, settling behavior, or calibration coefficients, those values require confirmation before final circuit sign-off.
This product page consolidates the verified manufacturer and distributor information, price observations, package details, application guidance, and drop-in candidate analysis. It also clearly distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers evaluate the MCP3551-E/SN without relying on unsupported assumptions.
ドロップイン代替品: MCP3551-E/SN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MCP3551T-E/SN
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCP3553-E/SN
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCP3551-E/SN 最大定格＆電気的特性
| Product Type | Sigma-delta analog-to-digital converter |
| 分解能 | 22 bit |
| Number of Input Channels | 1 channel |
| Input Architecture | Fully differential analog input |
| Conversion Rate | 14 sps |
| 出力ノイズ | 2.5 uVrms minimum |
| Total Unadjusted Error | <10 ppm |
| Supply Voltage Range | 2.7 V to 5.5 V |
| インターフェース | SPI |
| Internal Reference | Internal oscillator |
| 動作温度範囲 | -40 C to +125 C |
| パッケージ | 8-pin SOIC |
| Package Type | Surface-mount SOIC |
| Tube Packaging | 8-Pin SOIC N Tube |
| Automotive Qualification | AEC-Q100 |
| RoHS ステータス | Compliant |
| Manufacturer Product Family | MCP355X |
| Input Reference Arrangement | Fully differential |
| Low-Power Architecture | Low-power sigma-delta conversion |
| Analog Input Count | 1 |
MCP3551-E/SN surface-mount soic ピン配置ガイド
MCP3551-E/SN (surface-mount soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3551-E/SN.
詳細は データシート をご参照ください。
主な用途
MCP3551-E/SN の用途: 6 件s: Industrial Process Measurement, Bridge Sensor Signal Conditioning, Precision Temperature Acquisition, Low-Power Sensor Node, Pressure and Force Instrumentation, Chemical and Environmental Sensing.
Industrial Process Measurement
The MCP3551-E/SN fits slow industrial process channels where measurement resolution and low noise matter more than acquisition speed. Its 22-bit conversion resolution, fully differential input architecture, and noise as low as 2.5 uVrms are useful for monitoring small sensor signals in process-control equipment. The 14 sps conversion rate suits temperature, pressure, flow, and chemical-sensor signals that change slowly. Place the differential input network close to the ADC, use the manufacturer’s recommended bypass and filtering arrangements, and verify the actual input range and settling behavior against the datasheet before calibration.
おすすめ
Bridge Sensor Signal Conditioning
The MCP3551-E/SN is appropriate for bridge-based sensing because its fully differential inputs can receive the sensor output relative to a low-noise reference. The 22-bit resolution and sub-10-ppm total unadjusted error in the supplied comparison data support high-resolution extraction of small millivolt-level changes from strain, load, and pressure bridges. Its 14 sps rate is adequate for static or slowly varying mechanical measurements. Check input common-mode range and differential input limits, as those values are not included in the supplied excerpts.
おすすめ
Precision Temperature Acquisition
The MCP3551-E/SN can digitize slow temperature-sensor outputs in industrial thermometers, thermal controllers, and environmental monitors. Its 22-bit resolution provides ample code depth for low-level changes, while the fully differential input structure can support appropriately referenced sensor networks. The low 14 sps conversion rate is well matched to thermal response times and helps limit unnecessary conversion activity. Confirm the sensor’s output range and the ADC’s input thresholds, then use calibration data appropriate to the complete signal chain.
おすすめ
Low-Power Sensor Node
The MCP3551-E/SN fits compact, low-power sensor nodes because it combines a 22-bit sigma-delta architecture with a low 14 sps conversion rate. Its internal oscillator can simplify standalone measurement-chain design when an external clock is not required, and its 8-pin SOIC package preserves PCB area. For battery-powered equipment, calculate the average energy per conversion and verify the device’s complete operating-current and duty-cycle specifications in the manufacturer datasheet. External power gating or a load switch may further reduce standby consumption.
おすすめ
Pressure and Force Instrumentation
The MCP3551-E/SN supports pressure transmitters, force sensors, weighing equipment, and compact instrumentation requiring stable low-noise digitisation. Its fully differential inputs are beneficial when the transducer output is referenced to an analog ground or bridge midpoint, while the 22-bit resolution improves sensitivity to small mechanical changes. The 14 sps conversion rate is appropriate for quasi-static pressure and force readings rather than dynamic waveform analysis. Verify the transducer excitation requirements, ADC input range, and analog-front-end gain before implementation.
おすすめ
Chemical and Environmental Sensing
The MCP3551-E/SN is applicable to electrochemical, conductivity, gas, and environmental sensing systems that produce slowly varying analog outputs. The 22-bit sigma-delta conversion and low-noise specification can preserve small signal variations, while the differential input arrangement helps reject common-mode interference when paired with suitable excitation and filtering. The 14 sps rate is compatible with typical chemical-sensor response times. Verify the sensor excitation voltage, output polarity, and ADC input range, and use the datasheet’s recommended analog and digital layout practices.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3551-E/SN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3551T-E/SN | MCP3553-E/SN |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
主な差別化要因
- Verified 22-bit low-noise conversion （vs MCP3553-E/SN)
- Differential measurement architecture （vs MCP3551T-E/SN)
- 14 sps conversion-rate positioning （vs MCP3553-E/SN)
- Extended industrial temperature range （vs MCP3551T-E/SN)
設計ノート
Route the fully differential input pair as a tightly coupled pair on a quiet analog layer, with continuous ground beneath the signal path where practical. Place input filtering, reference components, and bypass capacitors close to their associated ADC pins. Keep the SPI traces away from the analog input and reference nodes because their switching edges can couple into the low-level differential signal. Confirm the exact pin locations and recommended layout from the Microchip datasheet and package drawing.
Treat the differential input as a precision measurement node rather than a general-purpose logic input. Use symmetric source impedances and matched filtering where possible, and control the analog ground and reference return path to minimize conversion-dependent error. The MCP3551-E/SN’s 22-bit resolution and 2.5 uVrms minimum noise specification make interconnect errors and ground contamination increasingly relevant. Validate noise, common-mode rejection, and offset performance on the intended PCB.
Do not assume that the 14 sps rating is suitable for dynamic waveforms, vibration analysis, or fast feedback loops. The verified rate is intentionally low and matches slow precision measurements. Also avoid substituting an ADC solely because it has the same 8-pin SOIC outline; check differential polarity, SPI mode and timing, data length, conversion latency, reference implementation, and digital command behavior. The two listed alternatives retain these verification requirements.
Use the manufacturer’s recommended supply bypassing directly at the ADC power pins and keep high-current digital return currents away from the analog reference and input ground paths. The supplied data confirms operation from 2.7 V to 5.5 V but does not provide a complete current-consumption table. Measure average and peak supply current in the final clocking and conversion mode before assigning a power budget, particularly for battery-powered sensor nodes.
コンプライアンス情報
RoHS is shown as compliant in the supplied Avaq comparison. The Arrow listing identifies the device as automotive AEC-Q100, but the exact qualification grade and full compliance declarations require confirmation from Microchip documentation. REACH, lead-free, halogen-free, and conflict-minerals status were not supplied.
