MKE16Z64VLF4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
部品番号: MKE16Z64VLF4 ✓ 生産中MKE16Z64VLF4 概要
A microcontroller is a programmable system-on-chip used to acquire sensor data, control actuators, and manage communication interfaces in embedded equipment. The Kinetis KE1xZ family combines an Arm Cortex-M0+ processor, embedded Flash and SRAM, timers, and mixed-signal peripherals in one low-power package. Its place in the device hierarchy is microcontroller, embedded processor, integrated circuit, and semiconductor.
The MKE16Z64VLF4 provides 64 KB of Flash for program storage and 8 KB of SRAM for working memory. Its 48 MHz Cortex-M0+ core handles real-time control tasks, while the NXP Touch interface supports capacitive sensing. CAN control adds a communication path for industrial and automotive control systems, while operation from 3.3 V and 5 V simplifies power-supply integration across 5 V and 3.3 V equipment.
Architecturally, the Cortex-M0+ processor provides a compact instruction set and deterministic interrupt-driven execution suitable for embedded control. Dedicated timer functions support periodic measurement, motor-control, and timing tasks. The combination of local Flash, SRAM, touch sensing, and CAN reduces the number of external devices required when a compact control platform must combine human-interface sensing with reliable communications.
Typical applications include automotive body-control modules, industrial sensor controllers, capacitive-touch user interfaces, motor-control subsystems, and CAN-connected industrial equipment. The 48-LQFP package is especially useful where a fine-pitch leaded package is preferred for inspection, hand rework, or automated through-hole-compatible assembly processes.
Designers should confirm the exact pin functions, peripheral routing, clock configuration, and programming requirements against the NXP KE1xZ documentation before layout release. Power rails must meet the device voltage limits, and both CAN and touch-sensing routes require careful separation from noisy power or actuator paths to preserve signal integrity.
This product page combines the NXP device description with package, memory, interface, application, and procurement details, plus a focused comparison with same-package Kinetis alternatives. It also highlights the engineering checks that matter most when reusing a PCB, validating firmware, or planning production assembly.
ドロップイン代替品: MKE16Z64VLF4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKE16Z64VLF4 (同一形状・フットプリント) — 相違点: Flash Memory, Package, Product Type, Architecture, Pin Count.
MKE16Z64VLD4
✅ ドロップイン価格はお問い合わせください
データシートを見る →MKE16Z32VLF4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MKE16Z32VLD4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKE15Z64VLF4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKE15Z64VLD4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKE16Z64VLF4 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0+ Microcontroller |
| Product Family | Kinetis KE1xZ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| RAM Memory | 8 KB |
| Architecture | Arm Cortex-M0+ |
| 電源電圧 | 3.3 V to 5 V |
| パッケージ | 48-LQFP, 7 mm x 7 mm |
| ピン数 | 48 pins |
| Touch Sensing Interface | NXP Touch (TSI) |
| Communication Interface | CAN control |
| 実装タイプ | Surface mount |
| Core Count | 1 core |
| データバス幅 | 32 bit |
MKE16Z64VLF4 48-lqfp, 7 mm x 7 mm ピン配置ガイド
MKE16Z64VLF4 (48-lqfp, 7 mm x 7 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKE16Z64VLF4.
詳細は データシート をご参照ください。
主な用途
MKE16Z64VLF4 の用途: 6 件s: Automotive Body Control, Industrial Sensor Controller, Capacitive-Touch User Interface, CAN-Connected Motor Controller, Embedded Data Acquisition Node, HMI Control Module.
Automotive Body Control
The MKE16Z64VLF4 fits compact automotive body-control modules that coordinate switches, lamps, sensors, and CAN traffic. Its 48 MHz Arm Cortex-M0+ core supports responsive event handling, while 64 KB of Flash accommodates application firmware, diagnostics, and configuration data. The 8 KB SRAM supports task state, communication buffers, and real-time control variables without requiring an external memory device. CAN control is particularly useful when the module must exchange status and commands across a vehicle network. Before schematic release, confirm the exact temperature grade, automotive qualification, CAN transceiver interface, and pin-level requirements from the NXP documentation for the selected order code.
おすすめ
Industrial Sensor Controller
The MKE16Z64VLF4 is appropriate for industrial sensor controllers that must acquire measurements, apply local logic, and report operating status over CAN. Its 48 MHz Cortex-M0+ core provides sufficient performance for interrupt-driven sensing and control, while 64 KB of Flash separates firmware from local calibration data and 8 KB of RAM accommodates active acquisition pipelines. The 3.3 V and 5 V operating range supports both legacy 5 V industrial equipment and 3.3 V sensor networks. Design the PCB with isolated routing between CAN and analog sensing, provide stable supply filtering, and validate the final peripheral assignments against the KE1xZ pin table.
おすすめ
Capacitive-Touch User Interface
The MKE16Z64VLF4 can implement a compact capacitive-touch control panel because it integrates NXP Touch sensing with a 48 MHz Cortex-M0+ processor. Touch scanning, debouncing, LED indication, and communications can run in one MCU, reducing the component count compared with separate sensing controllers. The 64 KB Flash capacity is useful for touch calibration data, interface state machines, and firmware updates, while 8 KB RAM supports scan buffers. Protect each touch channel from switching noise and follow the reference capacitance and grounding layout in the manufacturer documentation. Firmware should also include recalibration and fault-detection logic for moisture, shorts, and drifting electrodes.
おすすめ
CAN-Connected Motor Controller
The MKE16Z64VLF4 supports CAN-connected motor-control subsystems where a dedicated control MCU must combine communications with deterministic timing functions. The Cortex-M0+ core can execute state-machine logic at up to 48 MHz, while the 64 KB Flash provides room for motion profiles, fault handling, and communication protocols. CAN control allows the controller to receive commands and publish operating status. The 8 KB RAM is suitable for bounded control buffers, although complex field-oriented control loops may require additional memory or an external MCU. Separate sensitive analog and power-ground returns from CAN routing, confirm timer and PWM assignments, and validate thermal performance in the final motor-drive enclosure.
おすすめ
Embedded Data Acquisition Node
The MKE16Z64VLF4 can serve as a low-power data-acquisition node that samples sensors, applies filtering, stores configuration, and reports results through CAN. Its 48 MHz processing rate supports deterministic interrupt handling and moderate filtering workloads, while 64 KB Flash and 8 KB SRAM provide a practical balance for embedded firmware and active samples. Operation from 3.3 V and 5 V simplifies integration with industrial sensor buses and legacy controller boards. Keep high-impedance analog inputs away from CAN and switching-current paths, use the pin-description table to allocate ADC and timer resources, and check the complete electrical and timing characteristics before selecting the final operating mode.
おすすめ
HMI Control Module
The MKE16Z64VLF4 is useful in a human-machine interface module that combines capacitive buttons or sliders with networked control functions. NXP Touch provides the sensing interface, the 48 MHz Cortex-M0+ core handles debouncing and application logic, and CAN control enables communication with a machine controller. The 64 KB Flash can hold interface firmware, symbols, calibration constants, and diagnostics, while 8 KB RAM supports touch scans and message state. Use careful grounding and guarded sensor traces because motor drives and switching supplies can couple noise into high-impedance touch electrodes. Confirm indicator functions, communication timing, and reset behavior in the manufacturer pin table and application examples.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKE16Z64VLF4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKE16Z64VLD4 | MKE16Z32VLF4 | MKE16Z32VLD4 | MKE15Z64VLF4 | MKE15Z64VLD4 |
|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 64 KB | 64 KB | 32 KB | 32 KB | 64 KB | 64 KB |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
主な差別化要因
- Larger Flash allocation than 32 KB same-family choices (vs MKE16Z32VLF4)
- Direct same-memory family option with automotive-grade designation (vs MKE16Z64VLD4)
- Newer KE16 family choice when retaining 64 KB Flash (vs MKE15Z64VLF4)
設計ノート
Assign the LQFP lands by following the official package drawing and pin-description table exactly. Keep the 48-LQFP footprint mechanically centered on the PCB, preserve a practical solderable lead length, and avoid placing tall components against the package sides. Because the MCU combines touch sensing, CAN, and debug functions, route high-speed or high-current interfaces away from sensitive sensor pins and maintain a continuous ground reference beneath the device.
Plan the 3.3 V and 5 V supply implementation from the exact operating range and internal-domain requirements in the NXP documentation. Place required supply and decoupling capacitors at the associated power pins, with the shortest return path through the ground plane. Do not assume that a nominal 5 V rail automatically satisfies every internal supply domain; review external-component recommendations and power-sequencing constraints before finalizing the schematic.
Treat NXP Touch channels as sensitive high-impedance signals. Use short traces, a quiet ground reference, and the recommended grounding and filtering arrangement; keep switching-converter paths and motor-drive returns away from the touch electrodes. For CAN, use the transceiver and layout guidance in the NXP application material, including controlled differential impedance and a clean ground reference. Validate the assembled board for touch noise and communication margin.
A shared 48-LQFP outline does not by itself prove that two Kinetis order codes are interchangeable. Before replacing MKE16Z64VLF4, compare complete pin names, alternate-function routing, power pins, clock pins, debug interfaces, peripheral availability, memory size, temperature grade, qualification, and packing. Also review the application software for device-family identifiers and startup assumptions. Perform these checks at the schematic and firmware levels, not only by matching the package drawing.
コンプライアンス情報
The MKE16Z64VLD4 product listing identifies an automotive-grade option, but the target MKE16Z64VLF4 compliance declarations are not stated. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from NXP for the exact order code.