MKL02Z8VFG4 - 48MHz Cortex-M0+ MCU | NXP Semiconductors
部品番号: MKL02Z8VFG4 ✓ 生産中MKL02Z8VFG4 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The MKL02Z8VFG4 belongs to the Kinetis KL0x family, which provides an entry point into the Kinetis L series. Its Cortex-M0+ architecture supports compact embedded software while retaining familiar microcontroller peripherals, interrupt handling, and low-power operating modes for consumer, sensing, and industrial control products.
The principal device characteristics include a 48 MHz maximum CPU frequency, 8 KB flash, 1 KB SRAM, a 16-QFN package, and a stated operating-temperature range of -40°C to +105°C. NXP identifies the part as active. The device also includes a 12-bit analog-to-digital converter, enabling compact products to measure analog signals without requiring a separate converter when the chosen analog front end and application requirements are compatible.
The small 3 x 3 mm QFN package makes the MKL02Z8VFG4 appropriate for space-constrained products such as portable health devices, remote sensing nodes, compact consumer accessories, and low-power embedded controls. Its 8 KB flash footprint favors concise firmware, while 1 KB of SRAM supports the working memory required by lightweight control loops, configuration handling, and basic serial communication. The Cortex-M0+ platform and Kinetis L-series ecosystem also support migration from simpler 8-bit designs into a 32-bit software environment.
Power-system design should begin with the exact operating modes, clock configuration, and peripheral states required by the end product. Because the MCU is intended for ultra-low-power systems, enable only the clocks and peripherals needed for each mode, and confirm wake timing against the required response time. Place the decoupling network close to the supply pins and preserve the exposed-pad connection recommended in the manufacturer package documentation to maintain electrical and thermal performance.
This page combines the confirmed device identity, package, memory configuration, operating characteristics, application guidance, and packaging information with a conservative replacement analysis. Replacement candidates must be checked for exact pin mapping, boot behavior, peripheral availability, memory capacity, and software compatibility before being treated as production drop-ins. The Request a Quote form on this page can be used to request current availability, MOQ, lead time, and sourcing support for the exact MPN.
The Kinetis KL02 family is also recognized by Arm Keil as supporting low-power devices, remote-sensing nodes, portable consumer products, and ingestible healthcare sensing. These use cases align with the MKL02Z8VFG4 combination of a Cortex-M0+ core, 8 KB flash, 1 KB SRAM, and a compact 16-QFN package. Firmware footprint, analog requirements, I/O count, temperature exposure, and package-level pin compatibility remain the decisive checks for each new design.
ドロップイン代替品: MKL02Z8VFG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL02Z8VFG4 （同一形状・フットプリント） — 相違点: Flash Memory, Package, SRAM, Series.
MKL02Z32VFG4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MKL02Z16VFG4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →KL01Z8VFG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
KL01Z16VFG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MKL02Z4VFG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MKL02Z8VFG4 最大定格＆電気的特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 8K x 8 bits |
| SRAM | 1 KB |
| ADC Resolution | 12 bit |
| パッケージ | 16-QFN, 3 x 3 mm |
| 実装タイプ | Surface mount |
| 動作温度範囲 | -40°C to +105°C |
| Product Family | Kinetis KL02 |
| Series | Kinetis L series |
| Bit Width | 32 bit |
| ライフサイクル状態 | Active |
| Program Memory Type | Flash |
MKL02Z8VFG4 16-qfn, 3 x 3 mm ピン配置ガイド
MKL02Z8VFG4 (16-qfn, 3 x 3 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL02Z8VFG4.
詳細は データシート をご参照ください。
主な用途
MKL02Z8VFG4 の用途: 6 件s: Remote Sensing Node, Portable Health Sensor, Battery-Powered Portable Accessory, Industrial Sensor Interface, Compact LED Controller, Smart Home Sensor Hub.
Remote Sensing Node
The MKL02Z8VFG4 fits remote sensing nodes that periodically acquire a measurement, transmit it, and return to a low-power state. Its 48 MHz Arm Cortex-M0+ core handles the sensor-control logic, while 8 KB of flash accommodates a compact acquisition and communications firmware. The 16-QFN 3 x 3 mm package preserves board area in distributed nodes. Design the power budget around the selected sleep mode, wake sources, and sensor duty cycle, and verify the ADC configuration in the NXP data sheet before using the 12-bit converter for field measurements.
おすすめ
Portable Health Sensor
The MKL02Z8VFG4 is appropriate for compact wearable or ingestible health-sensing concepts where board area and energy use are tightly constrained. The Cortex-M0+ processor executes sampling control and basic signal interpretation, the 12-bit ADC supports suitable analog inputs, and the small 16-QFN package simplifies miniaturization. Confirm the full analog signal chain, input limits, sampling requirements, and low-power behavior in the manufacturer data sheet. Medical claims and diagnostic use require application-specific validation rather than qualification by the MCU alone.
おすすめ
Battery-Powered Portable Accessory
The MKL02Z8VFG4 can control a small battery-powered consumer accessory requiring several digital inputs, status indication, and a serial data path. Its 1 KB SRAM is suitable for lightweight buffering and protocol state, while the 48 MHz Cortex-M0+ core provides headroom for interrupt-driven control without requiring a larger MCU. The 3 x 3 mm QFN package supports dense layouts, but exposed-pad soldering and copper thermal design remain essential. Select external passives and radio modules only after checking voltage, current, and interface requirements.
おすすめ
Industrial Sensor Interface
The MKL02Z8VFG4 can serve as a compact front-end controller for an industrial sensor interface when the design requires local acquisition, conditioning, status reporting, and low standby power. Its stated -40°C to +105°C operating range supports environments beyond room temperature, and the 12-bit ADC can be evaluated for suitable transducer signals. Validate input bandwidth, accuracy, noise, and isolation requirements against the end-device specification. Use the exact electrical characteristics in the NXP data sheet to establish whether an external converter is necessary.
おすすめ
Compact LED Controller
The MKL02Z8VFG4 is suitable for compact LED-control modules that require deterministic timing, user input, status feedback, and low standby consumption. Its 48 MHz Cortex-M0+ core can manage multiple timing tasks and communications interrupts, while the 16-QFN footprint leaves board area for the driver and connector circuitry. Keep LED current, switching devices, dimming behavior, and thermal performance outside the MCU where required. Confirm that the selected PWM and general-purpose I/O resources meet the lighting design before finalizing the pin assignment.
おすすめ
Smart Home Sensor Hub
The MKL02Z8VFG4 can be used in a small smart-home sensor or control leaf node that packages sensing, local logic, and a low-rate communications interface into a constrained enclosure. Its 8 KB flash supports focused firmware, and its 1 KB SRAM is appropriate for lightweight message handling and sensor state. The compact package assists enclosure miniaturization, while the low-power MCU family supports duty-cycled operation. Validate the communications timing, memory allocation, brownout behavior, and available I/O against the node architecture before committing the design.
おすすめ
エンジニアリング参考データ: MKL02Z8VFG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL02Z32VFG4 | MKL02Z16VFG4 | KL01Z8VFG4 | KL01Z16VFG4 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-QFN (3 x 3 mm) | 16-QFN (3 x 3 mm) | 16-QFN (3 x 3 mm) | 16-QFN (3 x 3 mm) | 16-QFN (3 x 3 mm) |
| Product Family | Kinetis KL02 | Kinetis KL02 | Kinetis KL02 | Kinetis KL01 | Kinetis KL01 |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Flash Memory | 8 KB | 32 KB | 16 KB | 8 KB | 16 KB |
主な差別化要因
- Minimum 8 KB flash configuration within the candidate KL02 set （vs MKL02Z32VFG4)
- Compact package for space-constrained products （vs MKL02Z16VFG4)
- 48 MHz Cortex-M0+ control performance （vs KL01Z8VFG4)
設計ノート
Use the manufacturer QFN land pattern and thermal-pad geometry rather than a generic 16-QFN footprint. Route the exposed pad to the required ground or supply copper according to the NXP package documentation, use a solder mask-defined or windowed pad as specified, and place input and internal decoupling capacitors close to their associated pins. Verify paste volume, stencil apertures, reflow profile, and pad clearance before PCB release because QFN assembly defects can create both electrical and thermal failures.
Establish the complete power budget before selecting the final operating configuration. Disable unused peripherals and clocks, use the intended low-power mode during idle intervals, and size the energy reserve for peak acquisition, communications, and brownout recovery. Estimated battery life must be calculated from measured current states and the duty cycle: Estimated average current equals active current multiplied by active duty cycle plus sleep current multiplied by sleep duty cycle. Validate the result on the assembled product because regulator efficiency and leakage are board-dependent.
Do not assume that a same-package suffix is an automatic production drop-in. Compare the complete NXP pin table, power-pin grouping, exposed-pad function, reset behavior, boot configuration, oscillator requirements, ADC channels, timer resources, and software device identification for each candidate. MKL02Z32VFG4 has 32 KB of flash versus 8 KB for MKL02Z8VFG4, but that memory difference alone does not establish peripheral or pin compatibility. Validate both hardware continuity and the firmware image on the proposed replacement.
Keep sensitive analog inputs away from switching nodes, high-current LED paths, and fast digital edges. Use a compact, quiet ground return for the ADC and analog circuitry, provide local bypass capacitance, and route clocks and communication signals away from the analog section where practical. If the 3 x 3 mm package is placed close to a board edge, verify exposed-pad access, solder-joint inspection, and mechanical clearance. The final layout should follow the manufacturer reference layout and package recommendations.
コンプライアンス情報
The exact RoHS, REACH, automotive-qualification, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact MPN. Confirm them in the current NXP product documentation or with the manufacturer before contractual use.
