MKL15Z32VLK4 - 48MHz Cortex-M0+ 32KB MCU | NXP
部品番号: MKL15Z32VLK4 ✓ 生産中MKL15Z32VLK4 概要
A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, and peripherals in one package. The MKL15Z32VLK4 belongs to the Kinetis KL1x family, which is positioned for low-power embedded control. Its hierarchy extends from Arm Cortex-M0+ microcontroller to 32-bit microcontroller, embedded processor, and mixed-signal semiconductor.
Key features include a 48 MHz Arm Cortex-M0+ core, 32 KB flash for firmware, and 4 KB SRAM for working data. The integrated USB device controller supports designs that need a USB peripheral interface, while flexible clock options give designers more control over timing and power-management configurations. The 80-LQFP package provides enough pins for mixed-signal, communication, and general-purpose control interfaces.
The device architecture centers on the low-power Cortex-M0+ core, which is designed for cost-sensitive and energy-efficient embedded applications. Flash memory provides a stable location for application code and configuration data, while SRAM accommodates working variables, stack usage, and peripheral data. The USB device controller adds a useful connectivity block without requiring a separate USB interface IC on designs that use the supported USB device function.
Typical uses include USB-connected data loggers, compact industrial controllers, low-power sensor nodes, wearable or portable accessories, and embedded human-interface systems. The combination of 32 KB flash and 4 KB SRAM is suitable for small control loops, communication firmware, and moderate protocol stacks. Designs requiring larger code images or denser storage should evaluate higher-memory members of the Kinetis KL family.
PCB implementation should preserve the exposed-pad and decoupling requirements stated in the manufacturer datasheet. Place the bulk and high-frequency bypass capacitors close to the supply pins, route sensitive analog and communication signals away from fast-switching nodes, and confirm all 80 pin assignments before releasing the layout. Firmware selection should use the device configuration and pin-muxing tables for the exact ordering code.
This page combines the verified device identity, package characteristics, memory configuration, clock and USB features, compatible same-family options, and practical design guidance into one engineering reference. It also distinguishes the LQFP target from lower-pin-count members that may use similar ordering codes but require a different PCB footprint.
ドロップイン代替品: MKL15Z32VLK4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL15Z32VLK4 (同一形状・フットプリント) — 相違点: Product Type, Flash Memory, Package, Architecture.
MKL15Z64VLK4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MKL15Z128VLK4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL15Z256VLK4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MKL15Z32VLK4 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB |
| Core Architecture | Arm Cortex-M0+ |
| Instruction Set | 32-bit ARM |
| USB | USB device controller |
| Clock Options | Flexible clock options |
| パッケージ | 80-LQFP, 12 mm x 12 mm |
| Terminal Count | 80 terminals |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| 実装タイプ | Surface mount |
| Program Memory Type | Flash |
| Data Memory Type | SRAM |
MKL15Z32VLK4 square ピン配置ガイド
MKL15Z32VLK4 (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL15Z32VLK4.
詳細は データシート をご参照ください。
主な用途
MKL15Z32VLK4 の用途: 6 件s: USB Data Logger, Industrial Sensor Node, Low-Power IoT Controller, USB Human-Interface Controller, Portable Medical Accessory, Battery-Powered Instrument.
USB Data Logger
The MKL15Z32VLK4 fits a compact USB data logger because it combines a 48 MHz Arm Cortex-M0+ core, 32 KB flash, 4 KB SRAM, and an integrated USB device controller. The processor can acquire sensor data, format records, and service a USB command protocol without requiring a separate USB interface controller. Its 80-LQFP package also provides ample external pin access for sensors, status indicators, and data storage. Use the 32 KB flash for application firmware and configuration, while reserving 4 KB of SRAM for buffers, stack space, and protocol state. The principal design consideration is balancing USB activity and peripheral sampling against the ultra-low-power operating modes. Confirm device configuration, clock settings, and USB routing from the manufacturer documentation before finalizing firmware.
おすすめ
Industrial Sensor Node
The MKL15Z32VLK4 is suitable for an industrial sensor node that periodically measures analog or digital inputs and transmits the results through a low-power communications interface. Its 48 MHz Cortex-M0+ core provides ample control capability, while 32 KB of flash and 4 KB of SRAM support compact protocol stacks and measurement buffers. The 80-LQFP package makes the controller useful when the design needs more external pins than a small microcontroller package offers. Keep sensor excitation and analog signal paths physically separated from USB and digital clocking routes. Use low-power modes between measurement cycles, validate the operating-temperature limits for the deployment, and review the exact peripheral assignments before freezing the schematic.
おすすめ
Low-Power IoT Controller
The MKL15Z32VLK4 can serve as the central controller in a low-power IoT node that wakes periodically, reads local sensors, updates state, and communicates through USB during a service connection. The ultra-low-power Kinetis KL1x positioning is relevant for battery-operated equipment, while the 48 MHz Cortex-M0+ core handles control tasks and communication framing. Its 32 KB flash and 4 KB SRAM are appropriate for focused firmware rather than large graphical applications. The integrated USB device controller simplifies diagnostic or configuration connections without adding a separate transceiver. Designers should evaluate average current against the selected sleep mode, USB bus states, sensor duty cycle, and regulator efficiency, and should confirm all timing and pin-mux requirements in the manufacturer documentation.
おすすめ
USB Human-Interface Controller
The MKL15Z32VLK4 is well suited to a USB keyboard, control panel, or other human-interface peripheral because it provides USB device connectivity alongside a 48 MHz Cortex-M0+ processor and 4 KB of working RAM. Debouncing, LED animation, and USB reporting can run concurrently, while 32 KB of flash holds device firmware, descriptors, and configuration data. The 80-LQFP package provides direct access to switches, indicators, and external interface signals. A human-interface design should treat USB signal integrity and power delivery as separate layout concerns from the low-speed application logic. Confirm the supported USB mode, electrical requirements, and device configuration from the manufacturer documentation, and verify the firmware image size before production release.
おすすめ
Portable Medical Accessory
The MKL15Z32VLK4 can support a compact medical accessory that collects limited sensor data, presents a simple status indication, and exposes service data through USB. The 48 MHz Arm Cortex-M0+ core provides deterministic control capability, while 32 KB flash and 4 KB SRAM fit a focused acquisition and communications firmware image. The 80-LQFP package supports external sensors and isolated interface components without requiring the smallest possible footprint. Because this is a medical-adjacent application, validate the complete system for electrical limits, reliability, safety requirements, and applicable regulatory obligations; the MCU status alone does not establish medical certification. Use the manufacturer documentation for supply sequencing, clocking, pin multiplexing, and USB implementation details.
おすすめ
Battery-Powered Instrument
The MKL15Z32VLK4 fits a battery-powered measuring instrument that combines local sensing, a low-rate display or indicator, and USB recharging or configuration. Its 48 MHz Cortex-M0+ core can manage acquisition, filtering, and communication tasks, while 32 KB flash holds firmware and calibration information and 4 KB SRAM supports working buffers. The 80-LQFP package provides access to display, control, and sensor signals for designs that cannot use a very small leadless package. Power-system design should compare the MCU operating modes with regulator quiescent current, display load, and USB attachment behavior. Confirm whether the 80-LQFP exposed-pad layout and decoupling arrangement match the selected board constraints using the manufacturer package drawings.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL15Z32VLK4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL15Z64VLK4 | MKL15Z128VLK4 | MKL15Z256VLK4 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 64 KB | 128 KB | 256 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB |
| USB | USB device controller | USB device controller | USB device controller | USB device controller |
主な差別化要因
- Lower flash capacity supports a cost-conscious firmware footprint (vs MKL15Z64VLK4)
- Substantially more program storage in the same footprint (vs MKL15Z256VLK4)
- Fourfold flash expansion without changing SRAM capacity (vs MKL15Z128VLK4)
設計ノート
Use the manufacturer 80-LQFP land pattern and pin table rather than deriving the footprint from the 48-pin KL1x members. Place decoupling capacitors close to the supply pins, connect the exposed pad according to the package drawing, and preserve the recommended ground plane beneath the device. Separate sensitive inputs and external sensor connections from USB and high-speed digital routing to minimize coupled noise.
The 48 MHz core and 32 KB flash place the device in the general-purpose ultra-low-power Kinetis KL1x family, but system consumption depends on clock mode, active time, peripherals, and USB bus state. Select the lowest-performing clock configuration that meets response requirements, disable unused peripherals through device configuration, and review sleep-mode current using the manufacturer operating-current tables.
Do not treat a same-family ordering code as a drop-in replacement without checking the exact pin functions, package dimensions, exposed-pad requirement, and peripheral assignments. In particular, the 80-LQFP target is not interchangeable with the 48-QFN member MKL15Z32VFT4 because their package pin counts and PCB land patterns differ. Verify the complete pin-description table before schematic release.
コンプライアンス情報
Compliance details are not stated in the product information for this exact ordering code. Confirm current environmental and quality declarations directly with NXP using the part number.