MP7741DQ-LF-P - 10W Mono Class-D Audio Amplifier | MPS
部品番号: MP7741DQ-LF-P ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MP7741DQ-LF-P 概要
A Class-D audio amplifier is a switching amplifier that uses transistor stages to deliver audio energy efficiently. Compared with a linear amplifier, its MOSFET output stage can reduce power dissipation and support higher output power from a compact package. The MP7741 belongs to the integrated audio-amplifier hierarchy: Class-D amplifier, audio power amplifier, speaker driver, and power-management IC.
Key features include a 10 W output capability into an 8 Ω speaker, mono single-ended operation, and integrated protection functions. The manufacturer describes the amplifier as suitable for audio applications where compactness, efficiency, and reduced external discrete components are important. Its integrated 250 mΩ MOSFETs reduce the need for separate output power transistors, while the protection circuits address fault conditions that can otherwise damage an audio output stage.
The MP7741 uses a Class-D topology with a single-ended output, making board integration and speaker connection practical for portable audio, consumer audio, and auxiliary speaker systems. Designers should still account for supply decoupling, amplifier enable or shutdown sequencing, speaker loading, thermal dissipation, and the inductor requirements associated with the filtering and output network specified by the manufacturer design guidance.
Typical applications include compact speaker systems, portable audio products, sound bars, multimedia equipment, and auxiliary audio modules. Compared with a discrete Class-D output stage, the integrated device can reduce board area and assembly complexity. Compared with a larger multi-channel amplifier, the MP7741 is optimized for a single mono speaker channel, allowing designers to use multiple devices when stereo or multichannel amplification is required.
A key design consideration is thermal management. Although the integrated structure improves efficiency, sustained high output power still requires adequate copper area and a supply path capable of delivering the required current. The manufacturer evaluation board EV7741DQ-00A is a useful reference for evaluating the MP7741 amplifier implementation. Designers should follow the manufacturer’s recommended output filtering, input, supply, and layout arrangements rather than inferring them solely from the package dimensions.
This page combines the verified manufacturer product information and distributor listings with application guidance and engineering considerations. It also distinguishes verified technical facts from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the MP7741DQ-LF-P for speaker-driver designs without relying on unverified substitute specifications.
ドロップイン代替品: MP7741DQ-LF-P — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
MP7741DQ-LF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP7741DQ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP7741DQ-LF-P
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MP7741DQ-LF-P 最大定格＆電気的特性
| Product Type | Mono Class-D audio amplifier |
| Output Power | 10 W into 8 ohm |
| Supply Voltage Range | 9.5 V to 36 V |
| 出力構成 | Single-ended |
| Channel Count | 1 channel |
| Integrated Power MOSFET Resistance | 250 mOhm |
| Protection Features | Short-circuit protection; thermal protection |
| Startup/Shutdown Feature | Startup and shutdown pop elimination |
| パッケージ | 10-QFN, 3 mm x 3 mm |
| 実装タイプ | Surface mount |
| 動作温度 | -40 °C to +125 °C junction temperature |
| Distributor Packaging | Tape and reel |
| Standard Pack Quantity | 1600 pieces |
| Manufacturer Evaluation Board | EV7741DQ-00A |
| Functional Description | Fully integrated mono 10 W Class-D audio amplifier |
| RoHS ステータス | No according to distributor listing |
MP7741DQ-LF-P 10-qfn, 3 mm x 3 mm ピン配置ガイド
MP7741DQ-LF-P (10-qfn, 3 mm x 3 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MP7741DQ-LF-P.
詳細は データシート をご参照ください。
主な用途
MP7741DQ-LF-P の用途: 6 件s: Compact Mono Speaker Amplifier, Portable Audio Product, Soundbar Auxiliary Channel, Consumer Audio Auxiliary Module, Multimedia Speaker System, Industrial Audio Notification.
Compact Mono Speaker Amplifier
The MP7741DQ-LF-P fits a compact mono speaker module because it is specified for 10 W into an 8 ohm speaker and uses a single-ended Class-D output. The integrated 250 mOhm MOSFETs reduce the external output-stage component count, while short-circuit and thermal protection support practical fault handling. Place the device according to the manufacturer evaluation-board layout, use the recommended output-filter network, and verify the speaker’s continuous-power rating. The 10-QFN, 3 mm x 3 mm package helps minimize board area, but copper area and thermal vias remain important.
おすすめ
Portable Audio Product
The MP7741DQ-LF-P is suitable for portable audio products that require a compact Class-D output stage without a discrete MOSFET design. Its verified 10 W capability into 8 ohms provides a defined target for battery-powered speakers, personal-audio accessories, and small consumer products. The 9.5 V to 36 V supply range allows system-level flexibility, but the designer must check battery regulation, peak current, amplifier efficiency, and thermal rise. Startup and shutdown pop-elimination circuitry helps produce cleaner transitions during power management events.
おすすめ
Soundbar Auxiliary Channel
The MP7741DQ-LF-P can serve as an auxiliary or mono amplification channel in a soundbar or compact multimedia system. A single-ended Class-D output is appropriate when the channel drives an 8 ohm speaker and the design prioritizes low external component count. The integrated protections are useful in consumer equipment where accidental wiring faults or thermal conditions can occur. Designers should validate channel-to-channel gain matching, startup timing, grounding, and EMI behavior using the manufacturer reference design rather than assuming that the amplifier is interchangeable with every Class-D driver.
おすすめ
Consumer Audio Auxiliary Module
The MP7741DQ-LF-P is appropriate for consumer-audio auxiliary modules that need local amplification without adding a large discrete output stage. Its 10 W single-ended capability, integrated power MOSFETs, and pop-elimination functions support compact speaker-driver implementations. The module designer should account for input sensitivity, supply decoupling, output filtering, speaker impedance, and thermal verification. Because the supplied data does not confirm gain, frequency response, or detailed pin functions, those values must be checked in the latest manufacturer datasheet before analog and PCB design is frozen.
おすすめ
Multimedia Speaker System
The MP7741DQ-LF-P can be used in a multimedia speaker system requiring one amplified mono channel. Its single-ended Class-D topology and integrated protections simplify the output path compared with a discrete MOSFET design, while the compact 10-QFN package supports dense consumer electronics. For stereo or multichannel systems, multiple devices may be required, increasing the importance of shared supply decoupling, power budgeting, thermal design, and start-up sequencing. The verified data identifies the EV7741DQ-00A evaluation board as a useful implementation reference.
おすすめ
Industrial Audio Notification
The MP7741DQ-LF-P can be considered for compact industrial audio-notification equipment when the speaker load is 8 ohms and the required output is within the verified 10 W target. The integrated short-circuit and thermal protection can improve robustness, but industrial systems may impose EMC, temperature, and long-life requirements that must be evaluated separately. Confirm the 9.5 V to 36 V supply range against the available industrial rail and verify thermal performance at maximum ambient temperature. Use the manufacturer layout and filtering guidance to control switching-related EMI.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MP7741DQ-LF-P — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MP7741DQ-LF | MP7741DQ | MP7741DQ-LF-P |
|---|---|---|---|---|
| Package | 10-QFN (3 mm x 3 mm) | 10-QFN family package; confirm exact footprint | 10-QFN family package; confirm exact footprint | 10-QFN (3 mm x 3 mm) |
| Brand | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems |
| Amplifier Type | Mono Class-D | Mono Class-D family variant | Mono Class-D family variant | Mono Class-D |
| Output Power | 10 W into 8 ohm | 10 W target family rating; confirm suffix specification | 10 W target family rating; confirm suffix specification | 10 W into 8 ohm |
| Supply Voltage | 9.5 V to 36 V | 9.5 V to 36 V family target; confirm suffix | 9.5 V to 36 V family target; confirm suffix | 9.5 V to 36 V |
| Output Configuration | Single-ended | Single-ended family architecture | Single-ended family architecture | Single-ended |
| Integrated MOSFET Resistance | 250 mOhm | 250 mOhm family specification; confirm | 250 mOhm family specification; confirm | 250 mOhm |
| Protection | Short-circuit and thermal protection | Short-circuit and thermal protection family feature | Short-circuit and thermal protection family feature | Short-circuit and thermal protection |
主な差別化要因
- Single-ended 10 W mono output （vs MP7741DQ-LF)
- Integrated power stage （vs MP7741DQ)
- Compact integrated implementation （vs MP7741DQ-LF-P)
設計ノート
Use the manufacturer evaluation-board layout as the starting point for input, supply, output-filter, grounding, and exposed-pad connections. The verified data identifies EV7741DQ-00A as the MP7741 evaluation board. Keep the Class-D switching loop compact, provide local supply decoupling, and route the exposed thermal pad to the recommended copper and via structure. Do not finalize a footprint or pin mapping from distributor listings alone.
Validate thermal performance at the highest continuous speaker power and ambient temperature. The verified sources provide a 10 W output target and a -40 °C to +125 °C junction-temperature listing, but they do not provide a complete thermal-resistance table. Use the current manufacturer datasheet for allowed dissipation and junction limits, and verify the assembled board with thermal-vacuum testing or equivalent measurement before production release.
Class-D output stages can radiate switching energy, so output-filter placement and return-current control are essential. Follow the manufacturer’s recommended LC filter and keep the switching current loop away from sensitive input and microphone/audio paths. Check radiated and conducted emissions with the final enclosure, cable, speaker, and power-supply configuration; a reference-board result alone may not represent the finished product.
Do not treat the MP7741 family labels as automatically interchangeable without checking the exact ordering suffix, pinout, exposed-pad connection, and electrical limits. Also confirm the speaker impedance, supply range, output power, startup behavior, and thermal conditions. The supplied cross-reference results did not establish a complete independent replacement list, so engineering validation is required before substituting any part.
コンプライアンス情報
The verified distributor snippet states RoHS status No for the MP7741DQ-LF-P, while other compliance information was not supplied. The manufacturer product page should be consulted for current environmental and material declarations.
