MP8003AGQ-Z - 802.3af/at PoE PD Controller, 100V FET | MPS
部品番号: MP8003AGQ-Z ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.35 | $2.35 |
| 10 | $2.11 | $21.10 |
| 100 | $1.82 | $182.00 |
| 500 | $1.58 | $790.00 |
| 1,000 | $1.38 | $1,380.00 |
MP8003AGQ-Z 概要
A PoE powered device interface controller is the circuit that sits between the Ethernet data pair (or spare pairs) and the DC-DC converter inside a powered device such as an IP camera, wireless access point, or VoIP phone. Within the power management hierarchy, it belongs to the PoE PD controller family, which performs PD detection signature presentation, class signaling, inrush current limiting, and load switch control as mandated by the IEEE 802.3af/at standards.
Key features include full compliance with IEEE 802.3af and 802.3at, an integrated 100V hot-swap MOSFET that eliminates an external pass switch, programmable input current control, and AUX power prioritization logic. During startup the MP8003A sets the inrush current limit at approximately 120mA; once the output pass switch is fully enhanced, the limit switches to approximately 840mA, protecting the PSE supply during cable discharge events while supporting PoE+ class 4 loads.
Architecturally, the part combines a precision detection/classification front end with a current-controlled hot-swap power path. The 2-event classification support enables IEEE 802.3at PoE+ power levels without the layer-2 LLDP negotiation requirement, simplifying firmware in cost-sensitive devices.
Typical applications include PoE-powered IP security cameras, 802.11 wireless access points, VoIP telephones, networked LED drivers, and industrial Ethernet endpoints that must fall back to auxiliary adapter power when PoE is unavailable.
A key design consideration is thermal management of the integrated hot-swap MOSFET: use the QFN exposed pad with a solid ground pour to conduct switching-inrush heat into the PCB, and place bulk capacitance at VDD and the gate-driver output per the MPS datasheet recommendations.
This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: MP8003AGQ-Z — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MP8003AGQ-Z （同一形状・フットプリント） — 相違点: Detection, Function, Input Current Control, Package, Standards Compliance.
クイック比較ツール — 並列比較する代替部品を選択:
MP8003AGQ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MP8003A
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MP8003AGQ-Z 最大定格＆電気的特性
| 機能 | IEEE 802.3af/at PoE PD interface controller with AUX control |
| Standards Compliance | IEEE 802.3af (PoE), IEEE 802.3at (PoE+) |
| Powered Device Channels | 1 |
| Integrated Hot-Swap MOSFET Rating | 100 V |
| Inrush Current Limit (startup) | Approx. 120 mA |
| Operating Current Limit (switch enhanced) | Approx. 840 mA |
| Classification | 1-event and 2-event classification |
| Detection | PD detection signature per IEEE 802.3af/at |
| Input Current Control | Yes (programmable) |
| Auxiliary Power Control | Yes (AUX with PoE priority logic) |
| パッケージ | QFN-10 (3x3 mm) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant (RoHS per distributor listings) |
MP8003AGQ-Z qfn-10 (3x3 mm) ピン配置ガイド
MP8003AGQ-Z (qfn-10 (3x3 mm) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: MP8003AGQ-Z.
詳細は データシート をご参照ください。
主な用途
MP8003AGQ-Z の用途: 6 件s: PoE IP Security Cameras, 802.11 Wireless Access Points, VoIP Telephones, PoE LED Lighting and Smart Luminaires, Industrial Ethernet Endpoint Devices, Networking Test and Measurement Equipment.
PoE IP Security Cameras
IP surveillance cameras are the flagship application for the MP8003AGQ-Z. The controller presents the IEEE 802.3af/at detection and classification signature to the PoE switch, supports 2-event classification to obtain class 4 (PoE+) budgets of up to 25.5W at the powered device for PTZ cameras with IR illuminators, and limits startup inrush to approximately 120mA so long cable runs and PSE ports are not tripped. Its integrated 100V hot-swap MOSFET removes the external pass switch, shrinking the camera's power-entry PCB area, while the ~840mA operating limit protects the downstream buck converter. AUX control lets the same camera run from a local 12V adapter when PoE is unavailable, making the power entry fully dual-source with PoE priority handled in silicon.
おすすめ
802.11 Wireless Access Points
Enterprise and mesh Wi-Fi access points are typically powered directly from the PoE switch that also carries their data. The MP8003AGQ-Z handles the full powered-device handshake - detection, 1-event and 2-event classification, and input current control - so the access point advertises the correct 802.3at power class for multi-radio designs. The integrated 100V hot-swap MOSFET survives PoE transients and cable-discharge events common in ceiling installations, and the two-stage 120mA/840mA current limiting ensures reliable startup with the large bulk capacitance used in AP power stages. AUX input support allows desktop or lab powering from a wall adapter during commissioning without changing hardware.
おすすめ
VoIP Telephones
VoIP desk phones draw power entirely from the Ethernet cable under IEEE 802.3af (class 2/3 budgets). The MP8003AGQ-Z presents the correct detection signature to legacy PSEs and limits inrush to approximately 120mA during capacitor charging, meeting 802.3af timing requirements that older switches strictly enforce. Its 100V-rated hot-swap MOSFET tolerates the highest allowed PSE open-circuit voltages, and the AUX power control gives users a fallback AC adapter option for deployments without PoE infrastructure. The compact QFN-10 (3x3 mm) package fits the constrained handset base PCB, while input current control keeps the phone within its declared power class during ring and speaker operation.
おすすめ
PoE LED Lighting and Smart Luminaires
Networked LED luminaires increasingly use PoE as both data and power backbone. The MP8003AGQ-Z negotiates the power contract with the PSE via 1-event or 2-event classification and protects the luminaire input with its integrated 100V hot-swap MOSFET and approximately 120mA startup inrush limit. The ~840mA operating limit is suitable for mid-power LED strings driven by downstream constant-current converters. AUX control enables hybrid fixtures that can run from PoE or a local driver, and the small QFN-10 footprint suits the slim driver boards used in track lighting and downlights where thermal relief through the ground pour is straightforward to provide.
おすすめ
Industrial Ethernet Endpoint Devices
Factory-floor devices such as IIoT sensors, gateways, and Ethernet I/O modules benefit from single-cable PoE deployment. The MP8003AGQ-Z provides standards-compliant PD detection, classification, and input current control that coexist with industrial PSE injector equipment, while its 100V hot-swap MOSFET gives margin against the long, inductively-loaded cable runs typical in plants. The 120mA/840mA two-stage current limit ensures orderly power-up of microcontroller and communication circuitry, and AUX power control supports redundant powering schemes where a 24V panel supply backs up the PoE feed. The RoHS-compliant QFN-10 package supports industrial lead-free assembly processes.
おすすめ
Networking Test and Measurement Equipment
PoE testers, injectors, and protocol analyzers must emulate or load a powered device interface under controlled conditions. The MP8003AGQ-Z provides a real, standards-compliant PD signature with genuine 1-event and 2-event classification behavior and datasheet-defined 120mA inrush / 840mA operating current limits, letting instruments exercise PSE detection and fault-timing circuits authentically. Its AUX control input allows the test bench to inject external power while observing PoE priority handover, useful for validating dual-source products. The QFN-10 (3x3 mm) package integrates cleanly into modular test-front-end cards, with the exposed pad providing repeatable thermal performance across instrument temperature calibrations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MP8003AGQ-Z — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MP8003AGQ | MP8003A |
|---|---|---|---|
| Package | QFN-10 (3x3 mm) | QFN-10 (3x3 mm) - same | QFN-10 (3x3 mm) - same |
| Brand | Monolithic Power Systems | Monolithic Power Systems | Monolithic Power Systems |
| PoE Standards | IEEE 802.3af / 802.3at | IEEE 802.3af / 802.3at | IEEE 802.3af / 802.3at |
| Integrated Hot-Swap MOSFET | 100 V integrated | 100 V integrated | 100 V integrated |
| Inrush Current Limit | ~120 mA (startup) | ~120 mA (startup) | ~120 mA (startup) |
| Operating Current Limit | ~840 mA | ~840 mA | ~840 mA |
| Classification Support | 1-event and 2-event | 1-event and 2-event | 1-event and 2-event |
| AUX Power Control | Yes | Yes | Yes |
| RoHS / Lead-Free Suffix | Yes (-Z green suffix) | Non-Z suffix (verify compliance needs) | Base ordering code |
主な差別化要因
- Integrated 100V hot-swap MOSFET （vs TPS2378 (TI))
- Two-stage inrush control （vs MP8003AGQ (non-Z))
- AUX power control on chip （vs MP8003A base part)
設計ノート
The MP8003AGQ-Z integrates the 100V hot-swap MOSFET, so all pass-switch dissipation occurs inside the QFN-10 (3x3 mm) package. Solder the exposed pad to a minimum 2x2 array of thermal vias into a ground pour on the inner layer; without this, repeated PoE cable-discharge events can raise junction temperature substantially. Estimate dissipation as I_rail x Rds(on) of the internal FET during normal operation plus transient energy during the 120mA inrush phase - keep steady-state power path losses under roughly 1W for uncooled ceiling devices per standard QFN thermal resistance expectations.
Size the bulk capacitor at the PD input to charge within the IEEE 802.3af/at classification timing windows. Excessive input capacitance combined with the ~120mA startup limit can stretch startup beyond PSE timeouts and cause endless power-cycling loops. Follow the capacitance recommendation in the MPS MP8003A datasheet typical application, and verify startup on a PoE injector simulator, not just a bench supply, before releasing the design.
Keep the hot-swap power path loop (input bridge -> VDD pin -> internal FET -> output rail) short and wide to minimize transient voltage excursions during cable-discharge events. Place the current-sense and classification network components directly at the IC pins. Keep the AUX power-switch circuitry separated from the detection signature resistor network to avoid corrupting the IEEE detection signature presented to the PSE - MPS's reference design layout should be followed for the AUX prioritization node.
Coordinate the downstream DC-DC converter's current draw with the MP8003AGQ-Z's approximately 840mA operating current limit so that PoE+ class 4 loads start within the limit and the converter does not trip the controller during output ramps. Add soft-start or hiccup-mode settings on the downstream buck so its startup transient stays inside the controller's two-stage limit profile. For dual-source AUX designs, confirm the AUX priority thresholds in the MPS datasheet to guarantee a clean switchover without rail droop.
コンプライアンス情報
The -Z suffix denotes MPS green/lead-free packaging; distributor listings (JLCPCB, Mouser) mark the MP8003AGQ family RoHS. REACH, halogen-free, and conflict-minerals status not stated in provided data.
