MPC8308VMADDA - PowerQUICC II Pro SoC 266MHz | MAPBGA-473
部品番号: MPC8308VMADDA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $42.03 | $42.03 |
| 10 | $39.85 | $398.50 |
| 100 | $37.2 | $3,720.00 |
| 500 | $34.5 | $17,250.00 |
| 1,000 | $31.95 | $31,950.00 |
MPC8308VMADDA 概要
A PowerQUICC II Pro SoC is a system-on-chip that combines a Power Architecture processor core with integrated communications peripherals. Within the broader taxonomy it sits as: microprocessor -> embedded processor -> networking SoC -> PowerQUICC II Pro family -> communications semiconductor. The MPC8308 targets the general embedded networking market where integrated peripherals replace discrete components, reducing bill of materials cost and PCB complexity.
Key differentiating features of the MPC8308VMADDA include 266 MHz core frequency, 32-bit Power Architecture e300c3 core, integrated DDR2 memory controller supporting up to 256 MB, dual 10/100/1000 Ethernet controllers with TCP/IP acceleration, PCI Express interface, USB 2.0 host/device, and eSDHC for secure digital storage. The 473-MAPBGA package provides high pin density required for parallel DDR2 and multiple serial interfaces while occupying minimal board area.
The MPC8308 architecture combines the e300c3 superscalar core with a unified memory controller and dedicated communications engine. Hardware acceleration offloads DMA, encryption, and packet processing from the core, enabling deterministic throughput for routing, switching, and gateway workloads while maintaining low power consumption typical of the PowerQUICC II Pro family.
Typical applications include smart grid home energy gateways, wireless LAN access points, industrial control, networked printers, and IP set-top box controllers. The integrated GbE switch fabric and PCI Express make it particularly well suited for low-cost residential gateways and small office routers where single-chip integration replaces multi-chip designs.
When designing with the MPC8308VMADDA, ensure proper power sequencing for the 1.0V core and 1.8V/3.3V I/O rails. The DDR2 memory controller requires matched trace lengths and proper termination. Reference the NXP hardware specification for detailed JTAG, reset, and clock distribution requirements before committing to PCB layout.
This page synthesizes distributor pricing, drop-in PowerQUICC II Pro alternatives, and practical embedded design notes not found in the standalone manufacturer datasheet.
ドロップイン代替品: MPC8308VMADDA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8308VMADDA （同一形状・フットプリント） — 相違点: Memory Controller, Mounting Type, Operating Temperature, PCI Express, USB.
クイック比較ツール — 並列比較する代替部品を選択:
MPC8308CVMADDA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8308CVMADD
✅ ドロップイン✓ 在庫あり
$17.6 / 個
データシートを見る →MPC8306VMADDA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8313EVMADDA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8308VMAGDA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8308VMADDA 最大定格＆電気的特性
| Core Architecture | Power Architecture e300c3 (32-bit) |
| Core Frequency | 266 MHz |
| Number of Cores | 1 |
| パッケージ | 473-MAPBGA (19x19 mm) |
| 動作温度 | 0C to +105C |
| Memory Controller | DDR2 (up to 256 MB) |
| Ethernet | 2x 10/100/1000 Mbps (eTSEC) |
| PCI Express | Yes (1 lane) |
| USB | USB 2.0 (Host/Device) |
| Storage Interface | eSDHC (Secure Digital) |
| 実装タイプ | Surface Mount (BGA) |
| MSLレベル | 3 |
| Peak Reflow Temperature | 260C |
| Family | PowerQUICC II Pro |
MPC8308VMADDA 473-mapbga (19x19 mm) ピン配置ガイド
MPC8308VMADDA (473-mapbga (19x19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8308VMADDA.
詳細は データシート をご参照ください。
主な用途
MPC8308VMADDA の用途: 6 件s: Smart Grid Home Energy Gateway, Wireless LAN Access Point, Industrial Control Gateway, Networked Printer / MFP Controller, IP Set-Top Box Controller, Residential SOHO Router.
Smart Grid Home Energy Gateway
The MPC8308VMADDA's integrated dual Gigabit Ethernet with TCP/IP offload engine and 266 MHz e300c3 core make it ideal for smart grid home energy gateways. The SoC's Power Architecture core runs gateway firmware stacks while the dedicated communications engine offloads metering protocols, enabling real-time processing of HAN (Home Area Network) data and utility backhaul over GbE. DDR2 controller and USB 2.0 host allow local storage and meter connectivity without external bridge chips. Operating temperature of 0C to 105C supports outdoor meter enclosures in residential deployments.
おすすめ
Wireless LAN Access Point
The MPC8308VMADDA's combination of dual GbE (WAN/LAN), PCI Express for Wi-Fi module attachment, and low 2W typical power consumption suits wireless LAN access point designs. The e300c3 core runs the AP control plane while hardware TCP/IP acceleration handles NAT, firewall, and QoS functions. The 473-MAPBGA package supports the high pin density required for parallel DDR2 plus multiple serial interfaces, minimizing board area. Industrial temperature range allows deployment in warehouses and outdoor enclosures.
おすすめ
Industrial Control Gateway
The MPC8308VMADDA targets industrial control applications where its 0C to 105C operating range, deterministic e300c3 core, and integrated peripherals replace multi-chip discrete designs. The SoC's dual eTSEC ports support industrial Ethernet protocols (EtherCAT, PROFINET-ready) while the USB 2.0 host enables local HMI and configuration. DDR2 with eSDHC provides ample memory and storage for control loop firmware. Power consumption under 2W at 266 MHz supports fanless DIN-rail mounted enclosures in factory automation systems.
おすすめ
Networked Printer / MFP Controller
The MPC8308VMADDA's integrated USB 2.0 host/device, dual GbE, and DDR2 memory controller make it suitable for networked printer and multifunction peripheral controllers. The e300c3 core handles print rendering, job queuing, and network protocol stacks (TCP/IP, IPP, SNMP) while dedicated DMA engines accelerate image transfer from scanner to memory. eSDHC interface supports secure digital storage for fonts and macros. The low BOM count from integrated peripherals reduces printer controller board cost compared to multi-chip designs.
おすすめ
IP Set-Top Box Controller
The MPC8308VMADDA powers cost-sensitive IP set-top box designs where its integrated peripherals replace discrete components. The dual GbE handles LAN connectivity and MoCA bridge interface while DDR2 controller supports video buffer memory. USB 2.0 enables external storage and Wi-Fi dongle attachment. The e300c3 core runs middleware stacks (DLNA, HTTP, RTSP) at 266 MHz with hardware TCP/IP acceleration maintaining smooth video streaming. PCI Express allows attachment of HDMI encoder or Wi-Fi module.
おすすめ
Residential SOHO Router
The MPC8308VMADDA serves as the main processor in residential small office/home office routers, replacing multi-chip designs with a single integrated SoC. The dual GbE ports separate WAN and LAN, while the dedicated TCP/IP acceleration engine handles NAT and firewall at line rate. USB 2.0 host supports printer sharing and external storage. The 266 MHz e300c3 core runs the router OS with sufficient headroom for QoS and parental control features. Low 2W typical power makes it suitable for always-on 24/7 operation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8308VMADDA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8308CVMADDA | MPC8308CVMADD | MPC8306VMADDA | MPC8313EVMADDA | MPC8308VMAGDA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 473-MAPBGA (19x19) | 473-MAPBGA (19x19) - same | 473-MAPBGA (19x19) - same | 473-MAPBGA (19x19) - same | 473-MAPBGA (19x19) - same | 473-MAPBGA (19x19) - same |
| Core Architecture | Power Architecture e300c3 | Power Architecture e300c3 | Power Architecture e300c3 | Power Architecture e300c3 | Power Architecture e300c3 | Power Architecture e300c3 |
| Gigabit Ethernet Ports | 2 (eTSEC) | 2 (eTSEC) | 2 (eTSEC) | 1 (eTSEC) | 2 (eTSEC) | 2 (eTSEC) |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C | 0C to +105C |
主な差別化要因
- Errata-revision update with full drop-in compatibility （vs MPC8308CVMADDA)
- Dual Gigabit Ethernet vs single （vs MPC8306VMADDA)
- Same package, fewer security engine features （vs MPC8313EVMADDA)
設計ノート
The MPC8308VMADDA requires multiple voltage rails: 1.0V for the e300c3 core, 1.8V for the DDR2 interface, and 3.3V for general I/O and analog blocks. Power sequencing must follow the NXP hardware specification order to prevent latch-up - the 1.0V core rail should come up before or simultaneously with the 3.3V rail. Estimated: total power under 2W at 266 MHz, so a switching regulator with at least 3A capability on the 1.0V rail is recommended. Use MIC23303YML-T5 or equivalent for the core rail.
The 473-MAPBGA package requires via-in-pad or microvia technology for breakout routing. Follow the NXP reference design for DDR2 trace length matching - address/command signals should match within +/- 25 mils and data strobes within +/- 10 mils. Place at least 4 ground balls under the package in a symmetric pattern and stitch ground vias every 200 mils around the BGA perimeter. MSL-3 handling is required, with pre-bake at 125C for 24 hours if exposure exceeds the floor life.
Estimated: At 266 MHz the MPC8308VMADDA dissipates approximately 1.5-2W. The 473-MAPBGA package has theta_JA around 25 C/W with adequate PCB copper pour. For fanless industrial enclosures operating at 105C ambient, ensure at least 4 square inches of 1oz copper on top and bottom layers for heat spreading. Place thermal vias under the BGA thermal balls to conduct heat to inner ground planes. Avoid placing the SoC near enclosure walls that could trap heat.
Common pitfalls when designing with the MPC8308VMADDA: (1) failing to follow power sequencing causes latch-up; (2) improper DDR2 termination degrades memory bus margin; (3) leaving JTAG pins floating allows spurious resets - tie HRESET to a supervisor; (4) not routing USB DP/DN as 90 ohm differential pair reduces USB compliance; (5) bypassing the eSDHC pull-ups breaks SD card detection. Always consult the NXP hardware specification errata list for the specific silicon revision.
コンプライアンス情報
RoHS and REACH status not explicitly stated in the provided web data - marked unknown. Lead-free confirmed by NXP product page. AEC-Q100 not applicable for non-automotive MPU. MSL-3 per package specification.
