MPC8535ECVJAKGA - PowerQUICC III MPU 600MHz 783-FCBGA | NXP
部品番号: MPC8535ECVJAKGA ✗ 生産終了MPC8535ECVJAKGA 概要
What is a PowerQUICC processor? A PowerQUICC (pronounced 'power-quick') is a family of communications processors from NXP (originally Freescale, originally Motorola) that integrates one or more Power Architecture CPU cores with a high-bandwidth Communications Processor Module (CPM) or QUICC Engine. The family spans PowerQUICC I, II, and III generations and sits in the broader taxonomy: PowerQUICC -> communications processor -> application processor -> microprocessor -> integrated circuit -> semiconductor. PowerQUICC III parts specifically target enterprise routers, switches, wireless base stations, and industrial control requiring deterministic multi-protocol I/O.
The MPC8535E's headline features include a 32-bit e500 core running at 600 MHz, hardware-accelerated Security Engine (SEC 3.0) supporting DES/3DES/AES/SHA, two PCI Express interfaces, two Gigabit Ethernet controllers, two SATA-II ports, a USB 2.0 controller, an enhanced SDHC host, and 256 KB of internal SRAM with L1/L2 cache hierarchy. The integrated DDR2/DDR3 SDRAM controller supports up to 512 MB of addressable memory with ECC, while DUART, I2C, SPI, and local bus glue logic round out the peripheral set for legacy MCU-style connectivity.
Architecturally, the MPC8535E uses a Harvard-style e500 core with separate 32 KB L1 instruction and data caches plus a unified 256 KB L2 backside cache. The device implements NXP's Trust Architecture with secure boot and the SEC block offloading symmetric/asymmetric crypto from the CPU. On-chip serdes macros deliver multi-gigabit connectivity without external PHYs, which historically reduced board cost in router line cards and RAID controllers.
Typical applications include enterprise routers and switches, RAID storage controllers, industrial automation controllers, secure access points, factory automation PLCs, and military/aerospace embedded systems. The wide peripheral integration and -40C to +105C industrial temperature grade target designs requiring both rich I/O and harsh-environment reliability.
When designing with this device, evaluate whether the 600 MHz e500 throughput is sufficient for your control plane, confirm DDR3 routing supports fly-by topology for 783-ball flip-chip BGA assembly, and budget for the 783-ball FCBGA requiring multi-layer PCB with microvia stack-ups. Per the NXP product page, this part has reached End of Life status, so redesigns should verify remaining inventory and consider the newer QorIQ P-series family for fresh designs.
This page consolidates authorized distributor pricing, parametric specifications, package details, and engineering guidance beyond the raw datasheet to help procurement and design engineers evaluate the MPC8535ECVJAKGA for both legacy maintenance and new embedded designs.
ドロップイン代替品: MPC8535ECVJAKGA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MPC8535ECVJALGA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MPC8535E PowerQUICC III family
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MPC8535ECVJAKGA 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III |
| Core Architecture | Power Architecture e500 (32-bit) |
| Core Count | 1 |
| Maximum Core Frequency | 600 MHz |
| パッケージ | 783-FCBGA (29x29 mm) |
| 動作温度範囲 | -40C to +105C |
| Memory Controller | DDR2 / DDR3 with ECC |
| L1 Cache | 32 KB instruction + 32 KB data |
| L2 Cache | 256 KB unified |
| Security Engine | SEC 3.0 (DES/3DES/AES/SHA) |
| PCI Express Interfaces | 2 x PCIe |
| Gigabit Ethernet | 2 x GbE (SGMII/RGMII) |
| SATA | 2 x SATA-II |
| USB | 1 x USB 2.0 |
| SDHC | 1 x Enhanced SDHC host |
| RoHS ステータス | Compliant |
MPC8535ECVJAKGA 783-fcbga (29x29 mm) ピン配置ガイド
MPC8535ECVJAKGA (783-fcbga (29x29 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8535ECVJAKGA.
詳細は データシート をご参照ください。
主な用途
MPC8535ECVJAKGA の用途: 6 件s: Enterprise Router Line Cards, RAID Storage Controllers, Industrial Automation Controllers, Secure Access Points and VPN Gateways, Telecom Base Station Controllers, Military and Aerospace Embedded Systems.
Enterprise Router Line Cards
The MPC8535ECVJAKGA's 600 MHz e500 core, dual Gigabit Ethernet ports with SGMII/RGMII, and integrated Security Engine (SEC 3.0) make it a fit for enterprise router line cards and edge routers. The on-chip SEC offloads IPsec/SSL while PCIe links connect to a host backplane. The 783-FCBGA package supports the multi-layer PCB stack-up typical of telecom-grade routers and delivers deterministic throughput for control-plane packet processing.
おすすめ
RAID Storage Controllers
With two SATA-II ports, dual PCIe lanes, and DDR2/DDR3 memory with ECC, the MPC8535ECVJAKGA suits mid-range RAID controller cards. The e500 core manages RAID parity and command queuing while PCIe connects to a host system. The integrated SEC 3.0 enables hardware-accelerated AES for self-encrypting drives (SEDs), and the industrial -40C to +105C grade supports dense storage enclosures.
おすすめ
Industrial Automation Controllers
The -40C to +105C industrial temperature range and rich peripheral set (PCIe, GbE, SATA, USB, DUART, I2C, SPI, SDHC) fit industrial PLC, HMI, and motion controller designs. The 600 MHz e500 core with L1/L2 cache executes deterministic real-time control loops, while the SEC 3.0 secures factory-floor protocols. The 783-FCBGA package tolerates industrial environments when properly sealed and cooled.
おすすめ
Secure Access Points and VPN Gateways
The integrated Security Engine (SEC 3.0) accelerates AES, DES/3DES, SHA, RSA, and ECC, allowing the MPC8535ECVJAKGA to handle IPsec and SSL/TLS tunnels at line rate. Combined with the dual GbE ports and 600 MHz e500 core, the part suits secure wireless access points, VPN concentrators, and UTM appliances. The hardware crypto offload reduces CPU load by 50%+ versus software-only implementations.
おすすめ
Telecom Base Station Controllers
The MPC8535ECVJAKGA's combination of dual GbE, PCIe, and -40C to +105C industrial temperature makes it suitable for small-cell base station controllers and remote radio heads. The e500 core runs real-time protocol stacks while SEC 3.0 secures backhaul traffic. The integrated SDHC host supports local storage for logs and configuration data, and the DDR2/DDR3 controller handles high-throughput sample buffers.
おすすめ
Military and Aerospace Embedded Systems
The -40C to +105C industrial temperature grade, hardware crypto, and rugged 783-FCBGA package qualify the MPC8535ECVJAKGA for military/aerospace embedded systems where reliability and secure boot are mandatory. The Power Architecture e500 core supports VxWorks, INTEGRITY, and Green Hills INTEGRITY-178 tuMP RTOSes commonly used in avionics. The SEC 3.0 enables secure boot per NIST FIPS requirements for mission-critical applications.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8535ECVJAKGA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8535ECVJALGA |
|---|---|---|
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 600 MHz | 600 MHz |
| Core Architecture | Power Architecture e500 | Power Architecture e500 |
| Operating Temperature | -40C to +105C (industrial) | -40C to +85C (commercial) |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
| Gigabit Ethernet | 2 x GbE | 2 x GbE |
| PCI Express | 2 x PCIe | 2 x PCIe |
| Lifecycle Status | End of Life | End of Life |
主な差別化要因
- Industrial temperature grade （vs MPC8535ECVJALGA)
- Integrated Security Engine （vs MPC8535ECVJALGA)
- PowerQUICC III heritage （vs MPC8535ECVJALGA)
設計ノート
The 783-FCBGA package has a 0.8 mm ball pitch and requires multi-layer PCB with microvia technology. Allocate at least 8 PCB layers for signal routing, with dedicated ground and power planes adjacent to the BGA breakout layer. Fly-by DDR3 topology is recommended over T-branch for signal integrity above 667 MT/s; per the NXP hardware specification, VTT termination must be placed near the DIMM rather than the controller.
At full load the MPC8535ECVJAKGA may dissipate 5-8 W depending on peripheral utilization. Design the thermal solution for the 105C upper temperature bound and verify theta_JA against the NXP thermal model. A heatsink with thermal interface material is recommended for closed enclosures; forced airflow may be required for fanless designs at the industrial temperature ceiling.
Because this part is End of Life per the NXP product page, do not start new designs without a long-term supply plan. Evaluate the NXP QorIQ P1025 or P2020 as successors, verify firmware portability for your RTOS, and confirm whether your application can tolerate the different package. For maintenance of existing designs, place last-time-buy orders ahead of any inventory wind-down announcement.
コンプライアンス情報
RoHS compliance per NXP product page. AEC-Q100 not applicable for communications processors. Lifecycle status: End of Life per NXP discontinuance notice.