MPC8536CVTAVLA557 - PowerQUICC III SoC 1.5GHz 783-FCPBGA | NXP
部品番号: MPC8536CVTAVLA557 ✓ 生産中MPC8536CVTAVLA557 概要
What is a PowerQUICC III SoC? The PowerQUICC III family is NXP's line of integrated communications processors that combine a PowerPC host core with specialized communications engines. In the broader taxonomy, MPC8536 sits within PowerPC microprocessors -> embedded processors -> microcontrollers and MPUs -> integrated circuits. PowerQUICC III is engineered for protocol termination, packet processing, and routing in networking and storage equipment, enabling OEMs to consolidate multiple discrete components into a single chip.
Key features include the e500 core with MMU and double-precision FPU, hardware encryption acceleration options (Security Engine), four GbE MACs with SGMII support, dual PCIe controllers, two SATA 2.0 ports, USB 2.0, and a high-bandwidth DDR2/DDR3 SDRAM controller with ECC. The 783-FCPBGA package exposes extensive parallel I/O and multiple high-speed SerDes lanes for flexible board-level integration in line cards, base stations, and industrial control systems.
The MPC8536CVTAVLA557 uses a 32-bit Power Architecture Book E implementation with out-of-order execution capability and superscalar dispatch. Its coherency fabric connects the e500 core, SEC engine, and peripherals through a multilayer bus matrix, sustaining multi-gigabit data throughput while keeping interrupt latency bounded for real-time protocol stacks.
Typical applications include IP networking routers and switches, industrial control and factory automation controllers, LTE/4G small-cell base stations, secure VPN gateways, and network-attached storage controllers. The integration density reduces BOM count versus discrete CPU + PHY designs, while the industrial temperature rating supports outdoor and harsh-environment deployments.
When designing with this device, allocate generous copper area beneath the FCBGA thermal lid and use a minimum 8-layer PCB stackup to route the DDR3 matched-length groups. The SERDES reference clock must be supplied with sub-100 ps jitter to meet PCIe and SATA compliance margins.
This page synthesizes distributor pricing, parameter verification against the NXP datasheet, and design considerations not duplicated in the manufacturer brief - engineers can evaluate fit, identify same-package alternatives, and source authorized stock in one view.
ドロップイン代替品: MPC8536CVTAVLA557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8536CVTAVLA557 （同一形状・フットプリント） — 相違点: Ethernet, Memory Controller, Mounting Type, PCIe, Package.
MPC8536CVTANGA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8536CVTAQGA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8536EAVTAVLA
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8536CVTAVLA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8535CVTAQGA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8536CVTAVLA557 最大定格＆電気的特性
| Processor Type | MPC85xx PowerQUICC III 32-Bit |
| Core | PowerPC e500, 1 Core |
| Core Architecture | Power Architecture Book E |
| Operating Frequency | 1.5 GHz |
| Core Supply Voltage | 1.1 V |
| パッケージ | 783-FCBGA (29x29 mm) |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 4x Gigabit (SGMII/RGMII) |
| PCIe | 2x PCIe controllers |
| SATA | 2x SATA 2.0 |
| USB | USB 2.0 |
| Storage | SDHC |
| Security Engine | SEC 3.x (crypto acceleration) |
| 動作温度 | -40C to +105C (extended) |
| 実装タイプ | Surface Mount, BGA |
| Lead Free | Yes |
MPC8536CVTAVLA557 783-fcbga (29x29 mm) ピン配置ガイド
MPC8536CVTAVLA557 (783-fcbga (29x29 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8536CVTAVLA557.
詳細は データシート をご参照ください。
主な用途
MPC8536CVTAVLA557 の用途: 6 件s: IP Networking Router / Switch, LTE / 4G Small-Cell Base Station, Industrial Automation Controller, Secure VPN Gateway, Network-Attached Storage Controller, Edge Compute Gateway.
IP Networking Router / Switch
The MPC8536CVTAVLA557 fits IP networking routers and switches because it combines a 1.5 GHz e500 core with four Gigabit Ethernet MACs, dual PCIe controllers, and hardware SEC 3.x encryption acceleration in one 783-FCBGA. The DDR3 controller with ECC sustains multi-gigabit packet throughput, while the SEC engine sustains IPsec/SSL line-rate without software bottlenecks. Place the SoC on an 8-layer PCB with matched-length SERDES routing to PCIe and SGMII PHYs; unlike discrete CPU + switch ASIC designs, the integrated fabric cuts BOM cost and inter-chip latency.
おすすめ
LTE / 4G Small-Cell Base Station
Small-cell base stations require deterministic packet processing at multi-gigabit rates with industrial-temperature tolerance, and the MPC8536CVTAVLA557 delivers both at 1.5 GHz with a -40C to +105C rating. The DDR3 controller feeds real-time baseband buffers, while dual PCIe lanes connect to RF front-end cards and dual SATA ports handle local logging. The SEC engine secures backhaul IPsec tunnels at line rate. Use a heatsink under the FCBGA lid and an 8-layer PCB; the integrated peripherals eliminate the co-processor typically needed alongside a discrete CPU.
おすすめ
Industrial Automation Controller
Factory automation controllers need deterministic real-time response, wide temperature range, and industrial bus connectivity - the MPC8536CVTAVLA557 meets all three with its e500 core, extended -40C to +105C operation, and PCI/PCIe host ports. The dual PCIe lanes connect to industrial Ethernet or fieldbus cards, while the SEC engine secures OT traffic. Industrial-grade operation requires the AVLA temperature bin; commercial parts will fail thermal-cycling validation. The 783-FCBGA needs an 8-layer stackup with thermal via arrays under the lid for sustained 1.5 GHz operation.
おすすめ
Secure VPN Gateway
VPN gateways need sustained IPsec/SSL throughput at multi-gigabit rates - the MPC8536CVTAVLA557 integrates the SEC 3.x crypto engine that offloads AES, 3DES, SHA, and RSA from the e500 core. Four GbE MACs segment WAN/LAN/DMZ zones, while DDR3 with ECC protects key material integrity. Compared with software-only crypto on a general-purpose CPU, the integrated SEC sustains 2-3x higher tunnel counts at the same 1.5 GHz clock. Place near tamper-detection logic and route DDR3 with matched impedance for signal integrity.
おすすめ
Network-Attached Storage Controller
NAS controllers benefit from the MPC8536CVTAVLA557's dual SATA 2.0 ports, USB 2.0, and GbE MACs - enough to build a 2-bay RAID-1 appliance without a companion storage ASIC. The 1.5 GHz e500 core runs NFS/SMB/iSCSI stacks, while DDR3 with ECC protects against bit-flip on large file transfers. Industrial temperature rating supports deployment in unconditioned wiring closets. Add eMMC or NOR via local bus for boot; the integrated peripherals beat discrete CPU + SATA bridge designs on cost and latency.
おすすめ
Edge Compute Gateway
Edge gateways aggregate sensor data and run analytics at the network edge; the MPC8536CVTAVLA557 supports this with a 1.5 GHz e500 core, GbE uplinks, and industrial temperature operation. Dual PCIe lanes accept AI accelerator cards for inference, while SEC 3.x secures device-to-cloud links. The DDR3 controller with ECC ensures reliable operation in 24/7 deployments. Unlike Raspberry-class SoCs, this part is rated for harsh industrial environments and supports deterministic PCIe latency for time-sensitive networking.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8536CVTAVLA557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8536CVTANGA | MPC8536CVTAQGA | MPC8536EAVTAVLA | MPC8536CVTAVLA | MPC8535CVTAQGA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.5 GHz |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C | 0C to +70C (commercial) | -40C to +105C | -40C to +105C | 0C to +70C (commercial) |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2 only |
| SATA Ports | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 2x SATA 2.0 | 0 (no SATA) |
| Security Engine | SEC 3.x | SEC 3.x | SEC 3.x | SEC 3.x (enhanced) | SEC 3.x | SEC 3.x |
| Core Supply Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
主な差別化要因
- Industrial extended temperature bin （vs MPC8536CVTAQGA)
- DDR3 with ECC memory controller （vs MPC8535CVTAQGA)
- Dual SATA 2.0 ports on-die （vs MPC8535CVTAQGA)
設計ノート
Estimated: at 1.5 GHz with all SerDes lanes active and 1.1 V core, the MPC8536CVTAVLA557 dissipates approximately 8-12 W depending on peripheral loading. The 783-FCBGA requires a thermal via array directly under the lid (at least 0.3 mm drill, 1.2 mm pitch, 4x4 minimum array) connected to an inner copper pour. Without this, junction temperature can exceed +105C and trigger thermal shutdown in sealed enclosures.
Use a minimum 8-layer PCB stackup with stripline routing for DDR3 and SERDES signals. DDR3 address/command traces must be matched within +/- 25 ps; SERDES differential pairs within +/- 10 ps. The 29x29 mm FCBGA needs 0.8 mm ball pitch with NSMD land pads per IPC-7091. Reference the NXP AN4398 hardware design guide for complete layout rules before tape-out.
Power sequencing must follow the NXP MPC8536 datasheet: 1.0 V core must rise before 1.5 V/1.8 V I/O supplies with monotonic edges; violating this can trigger internal latch-up. The SerDes reference clock must have sub-100 ps RMS jitter or PCIe/SATA compliance testing will fail. Always read the security engine fuse settings via JTAG before locking the part for production.
コンプライアンス情報
RoHS and lead-free confirmed per NXP product page and Digi-Key distributor data. AEC-Q100 not applicable - this is a networking/industrial processor, not an automotive-grade part. REACH compliance per NXP environmental datasheet.