MPC8540VTAQFC - PowerPC e500 MPU 1GHz 783-FCPBGA | NXP/Freescale
部品番号: MPC8540VTAQFC ✓ 生産中MPC8540VTAQFC 概要
An embedded microprocessor (MPU) is a high-integration CPU device that combines a processor core, memory controllers, and peripheral IP into a single package. In the system hierarchy, the MPC8540 sits between a microcontroller (MCU) and a discrete CPU + chipset: it targets applications where deterministic networking performance, large address spaces, and sophisticated peripheral integration outweigh the lower cost of an MCU. The e500 core implements the Power Architecture Book E instruction set with signal-processing extensions and a memory management unit suitable for embedded Linux, VxWorks, and other real-time operating systems.
Key features of the MPC8540VTAQFC include a 32-bit PowerPC e500 core with dual-issue pipeline, integrated DDR memory controller, four DMA channels, dual 10/100/1000 Ethernet MACs (one SGMII, one enhanced triple-speed), PCI/PCI-X controller, and a programmable QUICC Engine subsystem. The device also integrates local bus controller with NAND flash support, SPI, I2C, and DUART for serial management. Power management is supported through sleep, nap, doze, and deep-sleep modes.
The architecture uses a 64-bit local bus and a 32-bit DDR SDRAM controller with ECC, while the QUICC Engine handles ATM, HDLC, PPP, and Ethernet protocol termination. Hardware table lookup accelerators accelerate routing table searches, offloading the main core.
Typical applications include wired and wireless infrastructure equipment (routers, switches, base stations), industrial control and factory automation, defense and aerospace networking, storage area network controllers, and embedded telecommunications platforms requiring deterministic protocol processing.
Design consideration: The 783-ball FCBGA package requires a multilayer PCB with controlled-impedance routing for the DDR memory interface and matched-length Ethernet traces. Use the manufacturer hardware specifications for signal-integrity and power-sequencing guidelines.
This page synthesizes distributor pricing, drop-in alternatives from the MPC85xx family, and practical design notes for engineers selecting the MPC8540VTAQFC into a long-lifecycle embedded design.
ドロップイン代替品: MPC8540VTAQFC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MPC8540VTAQFC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8540VTAQFC
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8540VTAQFC 最大定格＆電気的特性
| Processor Series | MPC85xx (PowerQUICC III) |
| Core Architecture | PowerPC e500 (32-bit) |
| Number of Cores | 1 |
| Maximum Core Frequency | 1.0 GHz |
| Core Supply Voltage | 1.3 V |
| パッケージ | 783-FCPBGA (29x29 mm) |
| 実装タイプ | Surface Mount (BGA) |
| Instruction Set | Power Architecture Book E with SPE |
| MMU | Yes (hardware TLB) |
| Cache | L1: 32 KB I-cache + 32 KB D-cache (per core) |
| Memory Controller | DDR SDRAM with ECC |
| Ethernet | 2x 10/100/1000 MAC (SGMII + eTSEC) |
| PCI/PCI-X | Yes |
| QUICC Engine | Yes (multi-protocol) |
| Local Bus | 64-bit with NAND flash support |
| 動作温度 | -40C to +105C (industrial) |
| Lead-Free / RoHS | Yes (per DigiKey listing) |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
MPC8540VTAQFC 783-fcpbga (29x29 mm) ピン配置ガイド
MPC8540VTAQFC (783-fcpbga (29x29 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8540VTAQFC.
詳細は データシート をご参照ください。
主な用途
MPC8540VTAQFC の用途: 6 件s: Wired Networking Routers and Switches, Wireless Base Station Controllers, Industrial Automation and Control, Telecommunications Line Cards, Storage Area Network Controllers, Defense and Aerospace Networking.
Wired Networking Routers and Switches
The MPC8540VTAQFC fits managed switch and router line-card designs because it integrates dual 10/100/1000 Ethernet MACs (one SGMII, one enhanced triple-speed), a high-performance e500 core at 1 GHz, and a QUICC Engine for wire-speed protocol termination. In a typical application the MPU sits between the PHY and the backplane, performing Layer 2/3 forwarding and ACL lookups with hardware-accelerated table search. The integrated DDR controller with ECC supports the large route-table memory that enterprise routers require. Compared with a discrete CPU plus chipset, the MPC8540VTAQFC reduces board area and BOM cost for mid-range networking equipment.
おすすめ
Wireless Base Station Controllers
Cellular base-station baseband and control-plane designs use the MPC8540VTAQFC for its deterministic interrupt latency, integrated QUICC Engine for ATM/HDLC backhaul, and long-lifecycle industrial temperature grade. The e500 core runs embedded Linux or VxWorks for PHY control and link aggregation, while the dual Ethernet MACs feed the backhaul network. The wide -40C to +105C operating range supports outdoor cabinet and tower-top deployments. Compared with general-purpose MPUs, the MPC8540VTAQFC's PowerQUICC heritage delivers proven telecom reliability.
おすすめ
Industrial Automation and Control
Factory-floor controllers and PLCs benefit from the MPC8540VTAQFC's wide temperature range, ECC memory support, and long-term supply continuity. The integrated PCI/PCI-X and local bus connect to legacy industrial I/O cards, while the dual gigabit Ethernet MACs link to plant networks. The e500 core runs deterministic real-time operating systems such as VxWorks for motion control loops. Compared with consumer-grade MPUs, the MPC8540VTAQFC's 10+ year lifecycle support is essential for industrial equipment manufacturers. The 783-FCPBGA package also supports the ruggedized PCB constructions used in industrial environments.
おすすめ
Telecommunications Line Cards
Telecom line cards for DSLAMs and access multiplexers use the MPC8540VTAQFC for its QUICC Engine multi-protocol termination (ATM, HDLC, PPP, Ethernet). The hardware offload engines handle T1/E1 and DSL framing without burdening the main core, while the e500 runs management-plane software and call processing stacks. The integrated DDR controller with ECC provides the reliability required for carrier-grade deployments. Compared with soft-CPU implementations, the MPC8540VTAQFC delivers deterministic wire-speed performance critical for telecom QoS guarantees.
おすすめ
Storage Area Network Controllers
Storage controllers for SAN and NAS appliances use the MPC8540VTAQFC for its high-bandwidth DDR controller, dual gigabit Ethernet, and PCI-X expansion for Fibre Channel or SAS HBAs. The e500 core runs storage protocol stacks (iSCSI, NFS, SMB) while the QUICC Engine handles lower-layer framing. The integrated local bus supports NAND flash for boot and configuration storage. Compared with multi-chip solutions, the MPC8540VTAQFC integrates all key storage interfaces into a single 783-FCPBGA package, reducing BOM and board complexity.
おすすめ
Defense and Aerospace Networking
Military and aerospace networking equipment uses the MPC8540VTAQFC for its ruggedized temperature grade, deterministic performance, and long-term NXP support. The e500 core supports MIL-STD-1553 and ARINC 429 interface cards via PCI/PCI-X, while the dual Ethernet MACs connect to tactical networks. The QUICC Engine handles legacy serial protocols common in defense systems. Compared with newer ARM-based MPUs, the MPC8540VTAQFC offers proven reliability in long program lifecycles. The device's cryptographic acceleration features also support secure communications required by defense applications.
おすすめ
エンジニアリング参考データ: MPC8540VTAQFC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8540VTAQFC (Freescale) |
|---|---|---|
| Brand | NXP Semiconductors | Freescale Semiconductor |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same |
| Core Architecture | PowerPC e500 | PowerPC e500 |
| Maximum Core Frequency | 1.0 GHz | 1.0 GHz |
| Core Supply Voltage | 1.3 V | 1.3 V |
| Number of Cores | 1 | 1 |
| Ethernet MACs | 2x 10/100/1000 | 2x 10/100/1000 |
| QUICC Engine | Yes | Yes |
| DDR Memory Controller | DDR1 with ECC | DDR1 with ECC |
| Operating Temperature | -40C to +105C | -40C to +105C |
| Lifecycle Status | Active | Active |
| RoHS | Compliant | Compliant |
主な差別化要因
- Integrated QUICC Engine for protocol termination （vs MPC8548EVTAUJB)
- Single-core 1 GHz with mature PowerQUICC software ecosystem （vs MPC8555EVTAPF)
- NXP-authorized long-lifecycle supply （vs Generic open-market MPU)
設計ノート
The 783-FCPBGA package at 29x29 mm requires a high-layer-count PCB (typically 8-12 layers) with dedicated ground and power planes. Use the manufacturer hardware specifications' recommended stackup and via pattern. BGA escape routing must use microvias or via-in-pad for inner-row balls. Maintain at least 4 ground-reference stitching vias around signal transitions to control impedance for DDR and Ethernet signals.
Estimated: at 1.0 GHz and 1.3 V core, the MPC8540VTAQFC dissipates approximately 5-8 W typical depending on workload. The FCBGA package requires a thermal interface material connecting the top of the die to a heatsink or cold plate. Provide at least 100 LFM airflow for natural convection applications, or forced cooling for higher ambient temperatures. The -40C to +105C industrial temperature grade requires derating analysis at the high-temperature corner.
The MPC8540VTAQFC requires multiple supply rails: 1.3 V core, 1.8 V or 2.5 V DDR, 3.3 V I/O, and a separate PLL analog supply. Power sequencing per the manufacturer hardware specifications is mandatory to prevent latch-up. Use a multi-rail PMIC or supervisory sequencer with proper monotonic ramp rates. Decoupling: place 0.1 uF X7R ceramics within 5 mm of each power ball, with bulk decoupling on each rail.
DDR memory interface requires matched-length traces within 25 mil tolerance and 50 ohm single-ended impedance to the controller. Ethernet SGMII differential pairs must be 100 ohm differential with matched length within 5 mil. Reference the manufacturer hardware specifications for complete SI design rules. Use IBIS models for SI simulation before PCB fabrication.
コンプライアンス情報
RoHS compliant per DigiKey listing. Industrial temperature grade (-40C to +105C) supports defense and industrial applications but is not AEC-Q100 automotive qualified.