MSP430A023IPM - 16-Bit 8MHz 8KB MCU | Texas Instruments
部品番号: MSP430A023IPM ✓ 生産中MSP430A023IPM 概要
A mixed-signal microcontroller is an embedded processing device that combines a digital processor core with analog input or output functions. The MSP430 belongs to the microcontroller hierarchy, combining a reduced instruction set computer core, memory, timers, serial interfaces, and analog peripherals within one integrated circuit. This integration allows a product to sense, process, and control external variables without requiring several separate components.
The MSP430A023IPM provides 8 KB of flash memory, 16-bit processing, and an 8 MHz clock. Its 64-LQFP package provides a comparatively high pin count for direct access to peripheral and interface functions. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment, while the flash memory allows firmware to be retained in the device itself. The exact RAM, analog-channel, timer, and serial-interface details should be confirmed in the manufacturer datasheet before assigning every peripheral function.
The MSP430 architecture uses a 16-bit RISC core designed around efficient register-based operation and low-power embedded control. Its mixed-signal capabilities make the device suitable for applications that acquire analog measurements and apply digital control or communication. An 8 MHz clock provides a practical operating point for motor, meter, sensor-controller, and industrial-control designs that do not require a high-performance application processor.
Typical uses include low-power sensing nodes, compact instrumentation, industrial control modules, appliance controls, and embedded systems that measure analog inputs and operate actuator or communication interfaces. The 10 x 10 mm LQFP format is especially useful for multilayer boards where a moderate pin count and exposed through-hole assembly are preferable to a very small leadless package.
PCB implementation should follow the manufacturer pin and land-pattern guidance, including decoupling placement and exposed thermal-pad requirements where applicable. Firmware development should account for the selected clock source, watchdog behavior, analog reference arrangement, unused I/O handling, and reset requirements. This page combines device specifications, sourcing guidance, replacement criteria, and practical design considerations for engineers evaluating the MSP430A023IPM.
ドロップイン代替品: MSP430A023IPM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMSP430A023IPM 最大定格＆電気的特性
| Device Type | 16-bit mixed-signal microcontroller |
| Series | MSP430x4xx |
| CPU Word Size | 16 bit |
| 最大クロック周波数 | 8 MHz |
| Flash Memory Size | 8 KB |
| Flash Memory Organization | 8K x 8 plus 256 B |
| Operating Supply Voltage Range | 1.8 V to 3.6 V |
| パッケージ | 64-LQFP (10 x 10 mm) |
| ピン数 | 64 pins |
| 実装タイプ | Surface mount |
MSP430A023IPM 64-lqfp (10 x 10 mm) ピン配置ガイド
MSP430A023IPM (64-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430A023IPM.
詳細は データシート をご参照ください。
主な用途
MSP430A023IPM の用途: 6 件s: Industrial Sensor Controller, Compact Instrumentation Module, Low-Voltage Appliance Control, Battery-Powered Sensing Node, Motor and Actuator Controller, Communications Interface Module.
Industrial Sensor Controller
The MSP430A023IPM fits compact sensor-control modules that acquire analog measurements and apply local logic within a 1.8 V to 3.6 V supply environment. Its 16-bit CPU, 8 MHz clock, and 8 KB flash provide a compact platform for sampling, filtering, threshold evaluation, status reporting, and actuator control. The 64-LQFP package exposes substantially more I/O than a small leadless device, which can simplify connection to sensors, indicators, and field-bus or serial interface components. Designers should use the manufacturer pin-description table to assign analog inputs, reference voltage, reset, clock, and digital control functions, then validate conversion accuracy, timing margins, and low-power behavior in the target application.
おすすめ
Compact Instrumentation Module
The MSP430A023IPM can serve as the controller in a compact measurement instrument that combines sensor conditioning, digital processing, local display control, and data communication. Its 8 MHz 16-bit core is suitable for control loops and protocol handling without adopting a higher-performance application processor, while 8 KB of flash supports a compact control program. The 64-LQFP footprint provides sufficient pins for display segments, buttons, reference inputs, and communications in a multilayer board. According to the manufacturer device listing, operation from 1.8 V to 3.6 V supports low-voltage designs, although the system designer must preserve analog accuracy, establish clean references, and allocate timing between sampling and display refresh functions.
おすすめ
Low-Voltage Appliance Control
The MSP430A023IPM is suitable for appliance and equipment controllers that combine local sensing, state logic, user inputs, and actuator outputs within a compact board. Its 8 KB flash provides room for embedded control firmware, and the 16-bit architecture supports arithmetic commonly needed in timing, level, and motor-control tasks. The 1.8 V to 3.6 V operating range can simplify low-voltage power architecture when paired with compatible sensors and drivers. Use the 64-LQFP package when the design benefits from more accessible external connections or through-hole assembly. Before production, verify peripheral assignments, brownout behavior, reset timing, and unused-pin states against the manufacturer datasheet and application-specific safety requirements.
おすすめ
Battery-Powered Sensing Node
The MSP430A023IPM can form the core of a battery-powered sensing node when its active current, standby behavior, and wake-up characteristics satisfy the energy budget. The 16-bit CPU at 8 MHz provides adequate processing for periodic measurements, threshold logic, and short communication bursts, while the 8 KB of flash keeps firmware resident on the device. Its low-voltage operating range supports carefully designed sensor and radio subsystems, although the total battery life must be calculated from the actual duty cycle and selected external components. The 64-LQFP package offers practical access to low-power control, wake, and status signals. Confirm retention behavior, brownout thresholds, clock startup, and peripheral idle states directly in the manufacturer datasheet.
おすすめ
Motor and Actuator Controller
The MSP430A023IPM can control simple motors, valves, relays, or other actuators when its timers, I/O, and interrupt resources satisfy the application. The 16-bit datapath is useful for counters, timing calculations, and closed-loop updates, while the 8 MHz clock provides a practical control-processing rate. The 64-pin package provides connections for control signals, feedback inputs, fault detection, and communication. A production design should verify the exact timer outputs, capture inputs, and pin multiplexing in the manufacturer pin table, then add appropriate driver transistors, protection, and flyback components. Motor-current noise and inductive transients must be kept away from sensitive analog and clock paths through careful partitioning, grounding, and decoupling.
おすすめ
Communications Interface Module
The MSP430A023IPM can act as a protocol-handling or data-routing module when the design requires modest computation, configurable I/O, and embedded firmware rather than a high-bandwidth processor. Its 8 MHz 16-bit core can manage framing, checksums, status reporting, and low-rate serial traffic, while 8 KB of flash accommodates a focused protocol stack. The 64-LQFP package is useful when the module needs multiple logic signals or selectable interfaces. According to the Texas Instruments device listing, the MCU operates from 1.8 V to 3.6 V, allowing integration with compatible transceivers and logic families. Confirm the exact UART, SPI, or other interface resources and their alternate pin mappings in the manufacturer datasheet before assigning board-level connections.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430A023IPM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Texas Instruments |
| Package | 64-LQFP (10 x 10 mm) |
| CPU Word Size | 16 bit |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 8K x 8 plus 256 B |
| Operating Supply Voltage | 1.8 V to 3.6 V |
| Product Family | MSP430x4xx |
| Mixed-Signal Microcontroller | Yes |
| Mounting Type | Surface mount |
主な差別化要因
- Exact 8 KB flash configuration （vs MSP430F135IPM)
- 16-bit mixed-signal control platform （vs MSP430F135IPM)
- Defined 8 MHz operating point （vs MSP430F135IPM)
設計ノート
Place the input, output, and reference bypass capacitors at the pins identified in the manufacturer recommended application circuit, with short ground returns to the device ground pins. Preserve the 64-LQFP land pattern, pad numbering, solder-mask clearance, and exposed thermal-pad geometry from the approved package drawing. Because the MSP430A023IPM combines digital control with mixed-signal functions, separate noisy switching nodes and high-current return paths from analog inputs to reduce ground-potential errors.
Design the 1.8 V to 3.6 V supply rail so it remains within the MSP430A023IPM operating range during startup, sleep transitions, and peripheral load changes. Confirm the selected regulator's startup time against the device reset requirements and use the manufacturer guidance for brownout behavior. External sensors, communications transceivers, and actuator drivers can dominate current demand, so calculate worst-case supply droop before assigning the regulator and bulk-capacitor footprint.
Route clock signals from the chosen oscillator or external clock source with short traces, appropriate return paths, and isolation from switching outputs. For analog measurements, follow the datasheet recommendation for the analog reference, source impedance, and sampling network because long traces and fast digital edges can disturb the measured signal. If the board includes relays, motor drivers, or switching supplies, keep their current loops away from the MCU power and analog-ground regions.
Do not treat another MSP430 device in a 64-LQFP package as a drop-in replacement merely because the package dimensions match. Verify pin names, alternate functions, timer resources, memory organization, interrupt vectors, clock requirements, and firmware dependencies against the manufacturer documentation. Also observe the 8 KB flash limit by checking the final linked image size, including interrupt vectors, startup code, calibration information, and application firmware.
コンプライアンス情報
The device listing identifies the MSP430A023IPM as a Texas Instruments mixed-signal microcontroller. Specific environmental, material, and automotive qualification declarations must be confirmed on the manufacturer product page or product declaration.
