MSP430F5637IPZ - 20MHz 16-Bit MCU | Texas Instruments
部品番号: MSP430F5637IPZ ✓ 生産中MSP430F5637IPZ 概要
An MSP430 mixed-signal microcontroller combines a low-power RISC processing core with analog and digital peripherals in one device. The MSP430F5637 belongs to the MSP430F5xx family, where the 16-bit CPU, 16-bit registers, constant generators, and low-power operating modes are optimized for battery-powered measurement equipment. USB and DMA extend the device beyond a basic general-purpose MCU by supporting efficient data transfer and peripheral interaction.
Key features include a 20 MHz maximum clock, 192KB of flash memory, 16KB of SRAM, 12-bit ADC and DAC resolution, comparator support, DMA, USB, and five low-power modes. The 100-pin LQFP (PZ) package provides the external signal connections needed for analog inputs, digital interfaces, debug access, clocking, and power management.
The mixed-signal architecture allows the MSP430F5637IPZ to process sensor data, perform local control functions, and transfer results without requiring separate analog and digital components. The 12-bit ADC is suitable for monitoring external analog signals, while the DAC can support stimulus generation or signal conditioning in test and measurement systems. DMA can move data between memory and peripherals while the CPU handles control and supervisory tasks.
Typical applications include industrial process monitoring, environmental sensing, portable medical measurement, laboratory instrumentation, energy measurement, USB-connected data acquisition, and embedded control systems. The 16-bit architecture and 192KB flash capacity are useful for firmware containing communication stacks, calibration routines, and application-specific signal processing.
When designing a PCB, preserve the pin assignments and decoupling requirements defined by the manufacturer datasheet. Pay particular attention to analog supply and reference routing, ADC input impedance, USB signal integrity, crystal or clock connections, and exposed thermal-management requirements. This page combines manufacturer specifications with package, application, sourcing, and replacement guidance for faster engineering evaluation.
ドロップイン代替品: MSP430F5637IPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F5637IPZ (同一形状・フットプリント) — 相違点: ADC Resolution, CPU Architecture, DAC Resolution, Low-Power Modes, Package.
MSP430F5638IPZ
✅ ドロップイン価格はお問い合わせください
データシートを見る →MSP430F5636IPZ
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F5635IPZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F5634IPZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F5633IPZ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F5637IPZ 最大定格&電気的特性
| Product Type | Mixed-Signal Microcontroller |
| CPU Architecture | 16-bit RISC |
| 最大クロック周波数 | 20 MHz |
| Flash Memory | 192KB |
| SRAM | 16KB |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Comparator | Integrated |
| DMA Controller | Integrated |
| USB Interface | Integrated |
| Low-Power Modes | 5 modes |
| 電源電圧 | 2.5 V to 3.3 V |
| パッケージ | 100-pin LQFP (PZ), 14 mm x 14 mm |
| 実装タイプ | Surface Mount |
| 動作温度 | -40°C to 85°C |
| Terminal Count | 100 terminals |
| Temperature Grade | Industrial |
MSP430F5637IPZ 100-pin lqfp (pz), 14 mm x 14 mm ピン配置ガイド
MSP430F5637IPZ (100-pin lqfp (pz), 14 mm x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F5637IPZ.
詳細は データシート をご参照ください。
主な用途
MSP430F5637IPZ の用途: 6 件s: Industrial Sensor Acquisition, Portable Environmental Monitoring, USB Data Acquisition, Portable Medical Measurement, Laboratory Signal Generator, Energy and Power Monitoring.
Industrial Sensor Acquisition
MSP430F5637IPZ fits industrial sensor-acquisition equipment that needs local signal conditioning, control, and data handling in one microcontroller. Its 12-bit ADC supports analog sensor monitoring, while the 20 MHz 16-bit RISC CPU can execute calibration, filtering, diagnostics, and communications. The 192KB flash accommodates acquisition firmware, configuration tables, and protocol stacks. USB provides a convenient connection to a host for configuration and measurement export. Designers should isolate sensitive analog inputs from digital return paths, follow the recommended ADC-reference layout, and validate the complete input range at the selected 2.5 V or 3.3 V operating condition.
おすすめ
Portable Environmental Monitoring
The MSP430F5637IPZ suits portable environmental-monitoring systems that combine sensor interfaces, local logging, and a low-power duty cycle. Its five low-power modes support operation between measurement intervals, and its integrated ADC can read temperature, humidity, gas, or other analog sensors. The 16KB SRAM permits local buffering while the 192KB flash holds firmware and calibration data. The 100-pin LQFP provides access to multiple digital inputs and communication interfaces without an external bus controller. Power-budget calculations should include sensor standby current, ADC acquisition time, USB-state leakage, and regulator efficiency because the MCU alone does not determine total battery life.
おすすめ
USB Data Acquisition
MSP430F5637IPZ can serve as the control and transfer engine in a USB-connected data-acquisition instrument. The integrated USB interface reduces the need for a separate USB controller, while DMA can move acquisition data efficiently between memory and peripherals. The 20 MHz CPU has sufficient throughput to combine sampling control, scaling, digital filtering, and device configuration. For dependable USB operation, follow the manufacturer layout for D+/D-, maintain continuous return paths, provide the specified decoupling, and observe USB impedance and isolation requirements. Firmware should also implement enumeration, suspend, resume, and bus-disconnect behavior rather than treating USB as a continuously active streaming interface.
おすすめ
Portable Medical Measurement
The MSP430F5637IPZ can support portable medical measurement equipment where low power, compactness, and integrated mixed-signal conversion are important. The 12-bit ADC is appropriate for many physiological or diagnostic front-end signals when the required accuracy and noise performance are met, while the DAC can provide test excitation or reference generation. The 16-bit RISC CPU supports real-time filtering and control, and USB enables connection to a host for data review. Medical designs require separate risk assessment, calibration validation, electrical-safety review, and compliance testing for the finished equipment; the MCU qualification alone does not establish medical-system compliance.
おすすめ
Laboratory Signal Generator
MSP430F5637IPZ is appropriate for a compact laboratory generator that combines a 12-bit DAC, a 12-bit ADC, and USB-controlled command handling. The DAC can create calibrated test waveforms, and the ADC can support output monitoring or closed-loop correction. The 192KB flash and 16KB SRAM provide room for waveform tables, control code, and communication routines. Performance depends on the reference source, output analog path, and DAC settling behavior, so validate those details in the manufacturer documentation. Keep the USB interface, digital timing, and sensitive analog output return currents separated to minimize data-dependent distortion.
おすすめ
Energy and Power Monitoring
MSP430F5637IPZ can form the core of an energy-monitoring system that measures analog quantities, records operating intervals, and reports results through USB or another digital interface. The integrated 12-bit ADC simplifies voltage and current sensing front ends, while DMA and the 16-bit CPU improve acquisition throughput. The five low-power modes can reduce consumption when measurements are intermittent. Accurate energy results require attention to sensor offset, gain, sample timing, and calibration, not merely ADC resolution. Use isolated or appropriately protected sensing paths for high-energy systems and validate creepage, clearance, filtering, and protection components independently of the microcontroller.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F5637IPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F5638IPZ | MSP430F5636IPZ | MSP430F5635IPZ | MSP430F5634IPZ | MSP430F5633IPZ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Low-Power Modes | 5 modes | 5 modes | 5 modes | 5 modes | 5 modes | 5 modes |
主な差別化要因
- Combines acquisition, generation, connectivity, and control in one MCU (vs MSP430F5638IPZ)
- 20 MHz mixed-signal processing platform (vs MSP430F5636IPZ)
- Industrial-temperature 100-pin LQFP implementation (vs MSP430F5635IPZ)
設計ノート
Use the manufacturer datasheet as the controlling source for the 100-pin LQFP footprint and land pattern. Place all required power and ground decoupling capacitors adjacent to their assigned pins, preserve continuous ground planes, and avoid routing USB D+/D- over split planes or noisy switching nodes. The mixed-signal ADC, DAC, comparator, USB, and debug functions make pin grouping and return-path discipline more important than simply matching the package dimensions.
Design the 2.5 V or 3.3 V supply system for both analog and digital loads, including startup current, USB attachment, ADC sampling, and the external clock network. Place bulk energy storage near the device and low-frequency ceramic bypass at each supply pin. Check every rail against the manufacturer operating limits before adding external loads; the MCU's stated voltage range is not permission to operate outside its specified conditions.
Keep ADC and DAC signals away from high-current switching paths and maintain a quiet return beneath sensitive analog routing. Use the pin-description table in the manufacturer datasheet when assigning external components, and follow its input-capacitance and source-impedance guidance. For USB, use a continuous reference plane, controlled differential impedance, short stubs, and the recommended common-mode network. Validate sampling accuracy and USB compliance on the finished board.
コンプライアンス情報
The manufacturer product information identifies an industrial-temperature device but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code.