MSP430F6636IPZ - 20MHz Mixed-Signal MCU | Texas Instruments
部品番号: MSP430F6636IPZ ✓ 生産中MSP430F6636IPZ 概要
A mixed-signal microcontroller is an integrated circuit that places digital processing, analog measurement, and analog output functions on the same device. In the system hierarchy, the MSP430F6636IPZ belongs to the MSP430 family of ultra-low-power microcontrollers and combines a RISC processor, embedded Flash and SRAM, communication peripherals, and mixed-signal conversion blocks. This integration allows a compact embedded design to acquire sensor signals, perform control calculations, drive an analog output, update a display, and communicate over USB without requiring several separate interface devices.
The principal feature set includes a maximum 20 MHz operating frequency, 128 KB of Flash for firmware and constants, and 16 KB of SRAM for working data. The 12-bit ADC and 12-bit DAC provide useful resolution for instrumentation and control tasks. A comparator supports fast threshold decisions, while DMA reduces CPU intervention during data transfers. The integrated 160-segment LCD driver is particularly useful for industrial meters, measurement panels, and human-interface equipment.
MSP430 devices use a 16-bit RISC architecture with 16-bit registers and constant generators, supporting compact, efficient firmware. The MSP430F663x family also supports USB 2.0, two Universal Serial Communications Interfaces, four 16-bit timers, and a hardware multiplier. These resources allow simultaneous peripheral operation and offload repetitive transfer work to DMA, although the exact channel allocation and interrupt behavior must be configured in firmware according to the device pin assignments and peripheral manual.
Typical uses include industrial data acquisition, environmental monitoring, portable instrumentation, medical monitoring equipment, USB-connected measurement tools, energy-management controllers, and LCD-driven control panels. The combination of USB, a 12-bit ADC, and a 12-bit DAC is particularly effective when a compact system must both capture physical quantities and provide a controlled analog output. For designs requiring more display segments, storage, or processing capacity, related MSP430F663x devices may offer alternatives, but migration still requires checking memory capacity, pin availability, and peripheral assignments.
PCB design should preserve short, clean analog paths around the ADC and DAC inputs and provide appropriate ground-plane continuity beneath the device. USB differential routing requires controlled impedance, matched geometry, and minimal stubs. Decoupling capacitors should be placed close to their associated supply pins, while unused inputs need to be configured according to the MSP430F663x mixed-signal microcontroller datasheet.
This product page consolidates the principal MCU resources, package characteristics, application guidance, and verified family alternatives. It also provides an engineering-focused comparison of memory, conversion resolution, communications, timing, and package constraints to help designers determine whether the MSP430F6636IPZ fits a mixed-signal, low-power embedded design.
ドロップイン代替品: MSP430F6636IPZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F6636IPZ (同一形状・フットプリント) — 相違点: Package, ADC Resolution, CPU Architecture, Comparator, USB Interface.
MSP430F6637IPZR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F6638IPZR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MSP430F6636IPZ 最大定格&電気的特性
| CPU Architecture | 16-bit MSP430 RISC |
| 最大クロック周波数 | 20 MHz |
| Flash Memory | 128 KB |
| SRAM | 16 KB |
| ADC Resolution | 12 bit |
| DAC Resolution | 12 bit |
| Comparator | Integrated |
| Direct Memory Access | Integrated |
| LCD Driver Capacity | 160 segments |
| USB Interface | USB 2.0 |
| Universal Serial Communications Interfaces | 2 USCIs |
| Timers | 4 × 16-bit timers |
| Hardware Multiplier | Integrated |
| RTC Capability | RTC with alarm capability |
| General-Purpose I/O | Up to 74 I/O pins |
| パッケージ | 100-LQFP (14 x 14 mm) |
| Temperature Grade | Industrial |
MSP430F6636IPZ 100-lqfp (14 x 14 mm) ピン配置ガイド
MSP430F6636IPZ (100-lqfp (14 x 14 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F6636IPZ.
詳細は データシート をご参照ください。
主な用途
MSP430F6636IPZ の用途: 6 件s: USB Data-Acquisition System, Industrial Sensor Monitor, LCD-Equipped Metering Panel, Portable Medical Monitor, Precision Analog Control, Battery-Powered Field Instrument.
USB Data-Acquisition System
The MSP430F6636IPZ fits a USB-connected measurement instrument because it combines a 20 MHz 16-bit processor, 12-bit ADC, DMA, and USB 2.0. The ADC can acquire sensor signals while DMA transfers samples without requiring every register movement to pass through the CPU, and USB provides a direct host interface. Its 16 KB SRAM supports local buffering, while 128 KB of Flash accommodates firmware, configuration data, and calibration tables. In implementation, separate analog and digital grounding, local bypass capacitors, and controlled-impedance USB routing are essential for repeatable measurements.
おすすめ
Industrial Sensor Monitor
The MSP430F6636IPZ is appropriate for an industrial sensor monitor that must measure analog inputs while maintaining local control and communications. Its 12-bit ADC provides greater measurement resolution than an 8-bit interface, while the comparator can support fast threshold detection independent of the main conversion sequence. The 20 MHz CPU can handle filtering, scaling, alarm logic, and communications, and the RTC with alarm capability supports time-based sampling. A robust implementation should include input protection, sensor excitation filtering, and careful partitioning of analog and digital return currents.
おすすめ
LCD-Equipped Metering Panel
The MSP430F6636IPZ suits a metering panel that combines numeric measurement, local display, and operator controls. Its integrated 160-segment LCD controller removes the need for a separate display driver when the glass is within that segment capacity. At the same time, the 12-bit ADC can acquire the quantity being displayed, and the DAC can generate a reference or test output. The 74 available I/O pins provide connections for keys, indicators, and additional sensors. PCB routing should keep LCD glass and high-impedance sensor nodes away from USB and switching-node traces.
おすすめ
Portable Medical Monitor
The MSP430F6636IPZ can serve as the controller in a portable medical monitoring module where low-power mixed-signal performance and local data handling are important. The 12-bit ADC acquires biosensor or physiological signals, the comparator supports threshold events, and DMA assists continuous data movement. Its 128 KB of Flash is suitable for embedded application code and fixed parameters, while USB can connect the module to a host for configuration and records. Medical designs still require separate front-end isolation, patient-safety analysis, calibration, and compliance validation beyond the MCU specifications.
おすすめ
Precision Analog Control
The MSP430F6636IPZ is useful when a controller needs both measured feedback and a controllable analog output. The 12-bit ADC captures the feedback signal, and the 12-bit DAC provides the actuator or reference command, allowing closed-loop calculations to run on the 20 MHz MSP430 CPU. Four 16-bit timers can coordinate update rates, while DMA can move control data efficiently. The practical limitation is analog accuracy: converter performance, reference quality, output loading, and board layout influence the final control loop, so firmware compensation should be designed around measured system behavior.
おすすめ
Battery-Powered Field Instrument
The MSP430F6636IPZ supports battery-powered field instruments that combine measurement, display, and USB connectivity without requiring several discrete controllers. Its 20 MHz processing capability handles filtering and control, while 16 KB of SRAM supports short acquisition buffers. The MCU's low-power-oriented architecture is valuable in portable equipment, and the RTC with alarm capability can schedule measurements or wakeups. Low-power design still requires attention to analog front-end quiescent current, USB-device operating states, display load, and unused-pin configuration rather than relying on software delays alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F6636IPZ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F6637IPZR | MSP430F6638IPZR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
| ADC Resolution | 12 bit | 12 bit | 12 bit |
| DAC Resolution | 12 bit | 12 bit | 12 bit |
| USB Interface | USB 2.0 | USB 2.0 | USB 2.0 |
| LCD Driver Capacity | 160 segments | 160 segments | 160 segments |
主な差別化要因
- Higher-memory replacement options remain in the same family and package (vs MSP430F6637IPZR)
- Mixed-signal conversion and USB are integrated in one MCU (vs MSP430F6638IPZR)
- Target capacity avoids unnecessary memory expansion (vs MSP430F6638IPZR)
設計ノート
Place the required bypass capacitors immediately beside the corresponding supply pins, with short ground returns to an uninterrupted ground plane. Separate noisy digital return paths from sensitive analog references and ADC inputs so that converter activity does not share a high-impedance return segment with the measurement node. The 100-LQFP footprint requires careful escape routing between the fine-pitch leads; inspect the manufacturer's land pattern rather than deriving pad geometry from body dimensions alone.
Route the USB differential pair as a controlled-impedance, tightly coupled pair with no stubs or test pads that interrupt the pair. Keep the USB connector, protection components, and MCU connection away from the ADC and DAC-sensitive area. Provide a continuous ground reference beneath the interface route and follow the MSP430F663x datasheet recommendations for USB signal conditioning and external components.
Treat analog input and output routing as a signal-integrity problem when the measurement bandwidth approaches converter performance limits. Keep input traces short, use a continuous reference plane, and place filtering or protection components close to the relevant pins. Firmware should allow sufficient acquisition settling time for the selected ADC channel and operating conditions. The 12-bit resolution alone does not guarantee 12-bit system accuracy.
Do not assume that equal package size and shared peripherals make every MSP430F663x device an automatic substitution. Review the device-specific memory size, secondary-USB or USB pins, LCD segment assignments, analog-channel availability, and package suffix. When migrating from MSP430F6636IPZ to MSP430F6637IPZR or MSP430F6638IPZR, rebuild the linker configuration and verify every peripheral pin against the selected device's pin-description table.
コンプライアンス情報
The industrial temperature-grade designation is confirmed, but specific environmental and material-compliance claims are not stated in the product information and require confirmation from Texas Instruments.