P2020PSE2HZB - QorIQ P2 Dual-Core 1.2GHz MPU | NXP
部品番号: P2020PSE2HZB ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $145 | $145.00 |
| 10 | $132.5 | $1,325.00 |
| 100 | $119 | $11,900.00 |
| 500 | $108 | $54,000.00 |
| 1,000 | $96.5 | $96,500.00 |
P2020PSE2HZB 概要
A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, cache hierarchies, memory controllers, and peripheral interfaces. Within the broader taxonomy, an MPU sits above microcontroller units (MCUs) in performance and is commonly architected for high-throughput data-plane workloads. The QorIQ P2 platform evolved from Freescale's PowerQUICC communications processors, targeting wire-speed packet processing in routers, switches, and secure gateways.
Key features of the P2020PSE2HZB include dual e500v2 cores at 1.2 GHz, integrated security engine, DDR3 memory controller with ECC support, multiple Gigabit Ethernet interfaces, PCIe and Serial RapidIO connectivity, and enhanced peripheral bus architecture. The communications-centric integration reduces BOM count for line-card designs while preserving software compatibility with the broader QorIQ family.
Architecturally, the P2020PSE2HZB leverages the e500v2 core with dual-issue superscalar pipeline, hardware table lookup assist, and integrated SEC engine for cryptographic offload. The platform supports symmetric and asymmetric cryptography, pattern matching, and bulk data encryption, making it suitable for IPSec, SSL/TLS termination, and IPsec VPN gateway applications.
Typical applications include multi-service routers, secure VPN gateways, LTE base station controllers, industrial automation controllers, medical imaging processors, and aerospace mission computers. The dual-core architecture delivers parallel processing of control-plane and data-plane tasks within a single chip.
When designing with this MPU, ensure proper thermal management for the TEPBGA II package - at full 1.2 GHz dual-core load, consider junction-to-ambient thermal resistance and use at least a four-layer PCB with thermal vias beneath the exposed die area. The platform requires a pre-boot loader or JTAG programmer for initial firmware development.
This page synthesizes distributor pricing, drop-in same-family alternatives, thermal guidance, and detailed comparison tables that augment the information gain over the manufacturer datasheet and standard distributor listings.
ドロップイン代替品: P2020PSE2HZB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P2020PSE2HZB （同一形状・フットプリント） — 相違点: Ethernet, Mounting Type, Operating Temperature, Serial RapidIO.
クイック比較ツール — 並列比較する代替部品を選択:
P2020NSE2KFC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P2020NSN2MFC
✅ ドロップイン✓ 在庫あり
$31.2 / 個
データシートを見る →P2020PSE2HFC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P2020NSN2HFC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P2020NSE2MFC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P2020PSE2HZB 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P2 |
| Core Architecture | PowerPC e500v2 |
| Number of Cores | 2 |
| データバス幅 | 32-bit |
| 最大クロック周波数 | 1.2 GHz |
| 動作温度 | 0C to +105C (Industrial) |
| パッケージ / ケース | 689-TEPBGA II (31x31 mm) |
| 実装タイプ | Surface Mount |
| Memory Controller | DDR3 with ECC support |
| Ethernet | Multiple Gigabit Ethernet interfaces |
| PCIe | Yes (PCI Express interface) |
| Serial RapidIO | Yes |
| Security Engine | Integrated SEC (cryptographic accelerator) |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
| Packaging | Tray |
| Lifecycle | Not Recommended for New Designs (NRND) |
P2020PSE2HZB 689-tepbga ii (31x31 mm) ピン配置ガイド
P2020PSE2HZB (689-tepbga ii (31x31 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P2020PSE2HZB.
詳細は データシート をご参照ください。
主な用途
P2020PSE2HZB の用途: 7 件s: Multi-Service Routers and Edge Gateways, IPSec VPN Concentrators and Secure Gateways, Industrial Automation and Process Controllers, LTE Small-Cell Base Station Controllers, Medical Imaging and Diagnostic Equipment, Aerospace and Defense Mission Computers, Test and Measurement Instrumentation.
Multi-Service Routers and Edge Gateways
The P2020PSE2HZB is ideal for multi-service routers, branch-office gateways, and edge routers where dual-core packet processing is required. Its dual e500v2 cores at 1.2 GHz deliver wire-speed IPv4/IPv6 forwarding while the integrated SEC engine accelerates IPSec and SSL/TLS termination at line rate. The DDR3 controller with ECC supports high-bandwidth routing tables, and the multiple Gigabit Ethernet interfaces provide direct WAN/LAN connectivity without external MACs. Compared to single-core QorIQ P1 parts, the P2020's second core enables separation of control-plane (routing protocols, management) from data-plane (packet forwarding), improving determinism.
おすすめ
IPSec VPN Concentrators and Secure Gateways
For VPN concentrators and secure gateway appliances, the P2020PSE2HZB's integrated SEC engine offloads AES, DES, 3DES, SHA, and RSA operations at hardware speeds. According to NXP's QorIQ P2020 documentation, the SEC accelerator delivers multi-Gbps bulk encryption while freeing CPU cores for policy and key management. Combined with the dual e500v2 cores running at 1.2 GHz, this MPU can sustain thousands of concurrent IPSec tunnels in enterprise or carrier-class VPN headends. The PCIe interface enables attachment of additional crypto accelerators or NPUs when scaling beyond the integrated SEC throughput.
おすすめ
Industrial Automation and Process Controllers
The P2020PSE2HZB fits industrial automation controllers, PLCs, and SCADA front-ends because its 0C to +105C operating range and dual-core architecture deliver deterministic real-time performance. The integrated peripherals - multiple UART, I2C, SPI, GPIO, PCIe, and Gigabit Ethernet - interface directly to industrial fieldbuses (PROFINET, EtherCAT, Modbus TCP) via companion chips. Hardware ECC on the DDR3 controller provides the memory integrity required for unattended industrial deployments. The 689-TEPBGA II package requires a four-layer PCB with thermal vias, which is standard practice in industrial designs.
おすすめ
LTE Small-Cell Base Station Controllers
Small-cell and picocell base station controllers benefit from the P2020PSE2HZB's dual-core processing, hardware SEC for secure backhaul, and integrated Serial RapidIO for DSP array connectivity. The e500v2 cores handle Layer 2/3 protocol stacks while the SEC engine secures S1 interfaces between eNodeB and EPC. Multiple Gigabit Ethernet MACs support both backhaul and local management interfaces. Compared to general-purpose ARM SoCs, the P2020's deterministic interrupt latency is better suited to cellular timing requirements.
おすすめ
Medical Imaging and Diagnostic Equipment
In medical imaging systems such as ultrasound carts, CT scanners, and patient monitors, the P2020PSE2HZB provides deterministic dual-core processing for image acquisition, reconstruction, and display pipelines. The DDR3 controller with ECC ensures image data integrity, while the Gigabit Ethernet interfaces stream DICOM images to PACS servers. Hardware security acceleration supports HIPAA-compliant encrypted data paths. The 0C to +105C operating range accommodates the thermal envelope of medical cart enclosures.
おすすめ
Aerospace and Defense Mission Computers
The P2020PSE2HZB's extended temperature capability, hardware SEC, and deterministic dual-core performance make it suitable for aerospace mission computers, UAV flight controllers, and ruggedized defense platforms. Its radiation-tolerant QorIQ variants (P2020SEC) are deployed in space applications. The PCIe and Serial RapidIO interfaces enable connectivity to avionics buses (MIL-STD-1553 via bridges) and high-speed sensor arrays. Hardware encryption secures tactical data links without software overhead.
おすすめ
Test and Measurement Instrumentation
For high-end oscilloscopes, protocol analyzers, and network test equipment, the P2020PSE2HZB delivers dual-core processing with hardware encryption for secure test result capture. The PCIe interface enables high-speed data acquisition cards to stream samples directly to DDR3 memory. Multiple Gigabit Ethernet ports support simultaneous test result aggregation and remote management. The hardware SEC engine secures firmware and calibration data at rest.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P2020PSE2HZB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P2020NSE2KFC | P2020NSN2MFC | P2020PSE2HFC | P2020NSN2HFC | P2020NSE2MFC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same |
| Core Architecture | PowerPC e500v2 (dual-core) | PowerPC e500v2 (dual-core) | PowerPC e500v2 (dual-core) | PowerPC e500v2 (dual-core) | PowerPC e500v2 (dual-core) | PowerPC e500v2 (dual-core) |
| Maximum Clock Frequency | 1.2 GHz | ~1.0 GHz | ~800 MHz | 1.2 GHz | ~1.0 GHz | ~1.0 GHz |
| Security Engine (SEC) | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C | -40C to +105C (extended) | 0C to +105C | 0C to +105C |
| Memory Controller | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| Approximate Unit Price (qty 1, USD) | $145 | $130 | $115 | $150 | $125 | $128 |
主な差別化要因
- Highest dual-core frequency in the QorIQ P2 family at 1.2 GHz （vs P2020NSN2MFC)
- Full hardware SEC engine with all cryptographic accelerators enabled （vs P2020NSE2KFC)
- Dual-core e500v2 with deterministic interrupt latency （vs AM4376BZDND80 (TI Sitara ARM Cortex-A9))
- Pin-to-pin compatible within the P2020 family （vs P1011NXN2HFB)
設計ノート
The 689-TEPBGA II (31x31 mm) package requires careful thermal management for dual-core 1.2 GHz operation. Use a four-layer PCB with at least 2 oz copper on inner/outer layers and a thermal via array (0.3 mm pitch, 0.5 mm drill) directly beneath the exposed die area. Theta-JA is approximately 18 C/W with proper via implementation; without it, junction temperatures can exceed limits under sustained dual-core load. For industrial enclosures without active cooling, derate clock frequency or use the lower-speed P2020NSN2MFC variant.
Route DDR3 signals with 50 ohm controlled impedance and length-matching within 25 mils across byte lanes. Place termination resistors as close as possible to the MPU balls. Use 100 nF decoupling capacitors on every power ball pair, plus bulk 10 uF ceramic capacitors near the package perimeter. The SerDes lanes (PCIe, SRIO, GbE) require AC-coupling capacitors and length-matched differential routing. Reference the NXP hardware reference manual for trace geometry.
Power sequencing on the P2020PSE2HZB must follow NXP's specified order: core voltage (Vdd) before I/O voltage (Vdd_IO), and I/O voltage before SerDes analog supplies. Use a power management IC with programmable sequencing, such as the NXP MC34VR500 or similar. Failure to sequence correctly can result in long-term reliability degradation or immediate latch-up. Estimated total power at 1.2 GHz dual-core peak: 8-12 W, depending on workload.
Do not assume the P2020PSE2HZB is in active new production - it is NRND and may become obsolete. Plan long-term supply via Rochester Electronics or franchised brokers. Ensure BSP selection matches your exact part number suffix (PSE vs NSN); software configuration differs. The JTAG debug port requires a CodeWarrior or Lauterbach TRACE32 debugger with the correct BSDL file. Misconfigured SerDes reference clock frequencies are a common bring-up failure mode.
コンプライアンス情報
RoHS and REACH compliant per NXP product declaration. Lead-free packaging (Tray). Not AEC-Q100 qualified - this is a communications MPU, not an automotive-grade IC. Halogen-free status not confirmed in provided data. For aerospace/defense applications, consult NXP's product compliance certificate for specific export control and ITAR information.
