P2041NSE7PNC - QorIQ P2 4-Core 1.5GHz PowerPC MPU | NXP
部品番号: P2041NSE7PNC ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $256.5 | $2,565.00 |
| 100 | $228 | $22,800.00 |
| 500 | $205.2 | $102,600.00 |
| 1,000 | $182.4 | $182,400.00 |
P2041NSE7PNC 概要
A QorIQ communications processor is a multicore Power Architecture SoC designed for networking, routing, and data-plane workloads. Within the broader taxonomy, QorIQ P-series devices belong to the Power Architecture (PowerPC) family of embedded microprocessors, used as host CPUs or packet-processing engines in routers, switches, base stations, and storage platforms. P2041 bridges P1 single/dual-core parts and higher-end P3/P4 platforms, sharing the same instruction set and pin-out with P2040.
Key features include four e500mc cores with hardware hypervisor and virtualization support, integrated security (SEC) engine with crypto acceleration, three PCIe Gen2 controllers, two 10 Gigabit Ethernet MACs, two 1 GbE MACs, two SRIO Gen2 controllers, SATA 2.0, two DDR3/3L controllers with ECC up to DDR3-1600, and a 32-bit performance monitor. The device targets embedded networking workloads where deterministic packet throughput and Linux/PowerPC software compatibility are required.
Architecturally, the P2041 uses a coherent fabric interconnect with shared L2 cache across the four cores, allowing efficient SMP-style workloads and packet distribution. The 45 nm process technology balances leakage and performance, and the device supports core frequency scaling via internal PLLs. Memory bandwidth scales with dual DDR3 controllers running up to DDR3-1600 with 64-bit ECC, sufficient for typical L2/L3 forwarding tables.
Typical applications include enterprise routers, multi-service switches, LTE small-cell base stations, network-attached storage controllers, industrial embedded control, and defense/aerospace packet processors. The P2041's mix of high-speed serial I/O (SRIO, PCIe, 10 GbE) makes it well-suited for line-card control-plane and management-plane duties alongside data-plane offload engines.
When designing with the P2041, allocate at least four PCB layers for power, ground, and signal routing, and follow NXP's layout guide for the FCPBGA escape. Thermal design must keep junction temperature within the 105C ambient envelope, and the SEC engine requires a TRNG and entropy source for full cryptographic functionality.
This page synthesizes distributor availability, pricing tiers, and pin-compatible alternatives across the P2040/P2041 family, plus design notes covering thermal management and PCB escape that extend beyond the manufacturer datasheet.
ドロップイン代替品: P2041NSE7PNC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P2041NSE7PNC （同一形状・フットプリント） — 相違点: Core Architecture, Core Frequency, Ethernet MACs, Memory Controller, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
P2040NSE7PNC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P2041NSN7PNC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P2041NSE7MMC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P2020NSE7MMC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P2010NSE7MMC
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P2041NSE7PNC 最大定格＆電気的特性
| Family | QorIQ P2 |
| Core Architecture | PowerPC e500mc |
| Number of Cores | 4 |
| データバス幅 | 32-bit |
| Core Frequency | 1.5 GHz |
| Process Technology | 45 nm |
| パッケージ | 780-FCPBGA (23x23 mm) |
| 実装タイプ | Surface Mount |
| 動作温度 | 0C to 105C |
| Memory Controller | DDR3/DDR3L with ECC, up to DDR3-1600 |
| PCIe Controllers | 3 x PCIe Gen2 |
| SRIO Controllers | 2 x SRIO Gen2 |
| Ethernet MACs | 2 x 10 GbE + 2 x 1 GbE |
| SATA | SATA 2.0 |
| Security Engine | SEC with crypto acceleration |
| Silicon Revision | Rev 2.0 |
| RoHS ステータス | Compliant |
P2041NSE7PNC 780-fcpbga (23x23 mm) ピン配置ガイド
P2041NSE7PNC (780-fcpbga (23x23 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P2041NSE7PNC.
詳細は データシート をご参照ください。
主な用途
P2041NSE7PNC の用途: 6 件s: Enterprise Routers and Switches, LTE Small-Cell Base Stations, Network-Attached Storage Controllers, Industrial Embedded Control, Defense and Aerospace Packet Processors, Single-Board Computers and Embedded Modules.
Enterprise Routers and Switches
The P2041NSE7PNC fits enterprise router and multi-service switch control-plane CPUs because its four e500mc cores at 1.5 GHz provide sufficient headroom for routing daemons (OSPF, BGP, IS-IS) and management-plane protocols, while the integrated dual 10 GbE and dual 1 GbE MACs reduce external PHY count. The three PCIe Gen2 controllers attach to line-card ASICs or co-processors, and the SEC engine accelerates IPsec/MACsec tunnels at line rate. Compared to a discrete CPU + network processor split, the P2041 lowers BOM and board area while keeping software portability via the standard PowerPC Linux/PowerPC ecosystem.
おすすめ
LTE Small-Cell Base Stations
The P2041NSE7PNC's combination of 4x e500mc cores and hardware-accelerated SEC makes it well suited for LTE small-cell base station baseband processing and IPSec backhaul. The dual DDR3/3L controllers with ECC up to DDR3-1600 deliver bandwidth for L2/L3 protocol stacks and timing-critical radio schedulers. Hardware virtualization supported by the e500mc cores allows partitioning baseband, OAM, and management stacks on a single SoC, reducing board complexity. The 0-105C operating range covers outdoor small-cell thermal envelopes.
おすすめ
Network-Attached Storage Controllers
The P2041NSE7PNC serves as a NAS controller SoC because its quad e500mc cores handle RAID, file-system (ext4/ZFS), and SMB/NFS/iSCSI protocols simultaneously without offloading. The SATA 2.0 interface connects to disk drives directly, while the dual 10 GbE MACs provide aggregated uplink bandwidth for 4-drive and 8-drive enterprise NAS appliances. ECC-enabled DDR3 controllers protect against silent data corruption in ZFS/RAID arrays. The integrated SEC engine accelerates SMB3 and iSCSI CHAP cryptographic operations.
おすすめ
Industrial Embedded Control
The P2041NSE7PNC delivers deterministic multicore performance for industrial automation controllers, machine vision processors, and SCADA gateways. Its PowerPC e500mc cores offer strong real-time behaviour with deterministic interrupt latency, and the SRIO Gen2 controllers can attach to DSP clusters or FPGA co-processors used in servo drives and motion controllers. The wide 0-105C operating range covers factory-floor enclosures, and the long-term NXP support lifecycle (where active) suits industrial designs with 7-10 year deployment windows.
おすすめ
Defense and Aerospace Packet Processors
The P2041NSE7PNC's hardware SEC engine with suite-B cryptography and its deterministic e500mc cores make it attractive for defense packet processors in tactical radios, UAVs, and secure gateways. The SRIO Gen2 links provide deterministic low-latency fabric connectivity to FPGA sensor arrays and DSP clusters. PowerPC architecture heritage in defense supply chains simplifies certification pathways. Note: P2041NSE7PNC is the 0-105C commercial variant; ruggedized designs may require screen-test alternatives within the same QorIQ P2 family.
おすすめ
Single-Board Computers and Embedded Modules
The P2041NSE7PNC powers VME/VPX single-board computers and COM Express-class embedded modules for test & measurement, medical imaging, and signal-intelligence applications. Its PCIe Gen2 controllers allow attachment of FPGA coprocessors, graphics cards, and high-speed ADC/DAC boards, while dual 10 GbE enables distributed processing topologies. The 780-FCPBGA package requires expert PCB layout (typically 6-8 layer stack-ups with buried capacitance), and NXP provides reference schematics for typical SBC implementations.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P2041NSE7PNC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P2040NSE7PNC | P2041NSN7PNC | P2041NSE7MMC | P2020NSE7MMC | P2010NSE7MMC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) |
| Core Count | 4 | 4 (may be SKU-limited) | 4 | 4 | 2 | 1 |
| Core Frequency | 1.5 GHz | 1.5 GHz | 1.5 GHz | 1.2-1.5 GHz (bin-dependent) | 1.2-1.5 GHz | 1.2 GHz |
| Operating Temperature | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C |
| Security Engine | SEC full | SEC (SKU-dependent) | SEC full | SEC full | SEC lite (subset) | No SEC |
| Silicon Revision | Rev 2.0 | Rev 2.0 | Rev 2.0 | Rev 2.0 | Rev 2.0 | Rev 2.0 |
| Lifecycle Status | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy |
主な差別化要因
- Full four-core e500mc at 1.5 GHz with complete SEC engine enabled （vs P2020NSE7MMC)
- Pin-compatible with P2040 family, enabling software-only platform scaling （vs P2040NSE7PNC)
- Three PCIe Gen2 + two SRIO Gen2 controllers provide versatile fabric attachment （vs P2010NSE7MMC)
設計ノート
Estimated: The 780-FCPBGA (23x23 mm) package with 1.0 mm ball pitch requires at least an 8-layer PCB stack-up with buried capacitance planes and matched impedance routing for DDR3, PCIe Gen2, and 10 GbE signals. Plan for microvia-in-pad fanout with laser-drilled 0.1 mm vias, and use the NXP reference design as the starting point. Power plane stitching must use 1.0 mm pitch via arrays under the BGA to suppress resonance.
Estimated: at typical 5W-10W power dissipation in the FCPBGA, the device relies on PCB copper heat-spreading via thermal vias under the exposed die region. Use a top-side heatsink for chassis with restricted airflow, and keep junction temperature below 105C (the upper commercial limit). Avoid routing high-current signals over the die area to prevent hot-spot coupling.
When migrating to P2040NSE7PNC, verify in NXP's product change notice that the SKU enables all four cores - some P2040 SKUs ship with cores disabled. Also note that NSN/E7/MMC suffixes encode temperature bin, silicon revision, and speed grade respectively; always cross-reference the ordering guide before substitution to avoid locked features. Plan bootloader and u-boot updates for any silicon revision transition.
コンプライアンス情報
RoHS and lead-free status per NXP product environmental documentation. AEC-Q100 is not applicable for networking MPUs. REACH and conflict-minerals compliance confirmed per NXP supplier declarations.