P5020NSN7MMB557 - QorIQ P5 Dual-Core 1.2GHz SoC | NXP | Networking
部品番号: P5020NSN7MMB557 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $246 | $24,600.00 |
| 500 | $222.5 | $111,250.00 |
| 1,000 | $198 | $198,000.00 |
P5020NSN7MMB557 概要
A SoC (System-on-Chip) integrates a CPU complex, memory controller, high-speed I/O peripherals, and often hardware acceleration blocks into a single silicon die. The QorIQ P5 platform belongs to NXP's communications processor family built on Power Architecture technology, positioned between general-purpose embedded microprocessors and full multi-core DSP/ASIC designs. The hierarchy: Power Architecture core -> QorIQ SoC platform -> communications processor -> embedded microprocessor -> semiconductor IC. This consolidation reduces board area, BOM cost, and power envelope versus a CPU-plus-discrete-peripheral approach.
Key features include dual e5500 superscalar 64-bit cores, large L1/L2 caches for deterministic throughput, integrated DDR3 memory controller with ECC, multiple high-speed serial interfaces for fabric connectivity, and a hardware accelerator block for packet processing and security offload. The 1295-FCPBGA package provides the signal and power-pin density required to expose this I/O set while maintaining manageable BGA escape routing.
The architecture combines out-of-order execution cores with coherently shared L2 cache, an integrated CoreNet fabric for coherent multi-core traffic, and pattern-matching engines for deep packet inspection. Hardware acceleration of encryption (SEC) and regular expression (PATGEN) frees CPU cycles for control-plane and exception-path workloads typical in networking equipment.
Typical applications include enterprise routers and switches, network attached storage (NAS), industrial control with networking, LTE/4G base station control-plane, and smart-grid or military/aerospace secure routers. The combination of dual cores at 1.2 GHz, hardware crypto, and multi-protocol fabric make it well suited for mid-range managed switches and edge routers.
When designing with this part, allocate sufficient PCB layers (typically 8+ with 2 buried for power) for clean BGA breakout and high-speed signal integrity. The 1.00 mm ball pitch requires 0.6 mm/0.45 mm laser-drilled microvias for inner-layer escape. Provide a high-efficiency multi-phase VRM for the core rail - transient excursions under load can exceed 30 A.
This page synthesizes distributor pricing, same-brand QorIQ family drop-in variants, parameter proximity data, and PCB layout guidance that is not contained in the single manufacturer datasheet, helping embedded designers shorten qualification cycles.
ドロップイン代替品: P5020NSN7MMB557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
P5010NSN7MMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5020NSN7MMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5020NSN7MMB557 最大定格＆電気的特性
| Part Number | P5020NSN7MMB557 |
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P5 |
| Core Architecture | Power Architecture e5500 |
| Number of Cores | 2 |
| Core Bit Width | 64-bit |
| Maximum CPU Clock | 1.2 GHz |
| 動作温度範囲 | 0 C to +105 C (TA) |
| パッケージ | 1295-FCPBGA (37.5 mm x 37.5 mm) |
| Ball Pitch | 1.00 mm |
| 実装タイプ | Surface Mount |
| Memory Controller | DDR3 with ECC |
| Integrated Interfaces | PCIe, GbE, Serial RapidIO (SRIO), HW Accel |
| Silicon Revision | R2.0 |
| Supply Status | Active (per Kynix listing as of 2026-10-17) |
P5020NSN7MMB557 1295-fcpbga (37.5 mm x 37.5 mm) ピン配置ガイド
P5020NSN7MMB557 (1295-fcpbga (37.5 mm x 37.5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: P5020NSN7MMB557.
詳細は データシート をご参照ください。
主な用途
P5020NSN7MMB557 の用途: 6 件s: Enterprise Routers and Managed Switches, Network Attached Storage (NAS) Controllers, Industrial Networking and Control Gateways, LTE / 4G Base Station Control-Plane, Secure Routers for Military and Aerospace, Smart-Grid Substation Communication.
Enterprise Routers and Managed Switches
The P5020NSN7MMB557's dual 1.2 GHz e5500 cores deliver the throughput required for control-plane processing in mid-range enterprise routers and L2/L3 managed switches. Its integrated GbE MACs, PCIe Gen2 lanes, and Serial RapidIO ports allow direct connection to line-card ASICs and switch fabrics without external bridges. The hardware SEC and PATGEN accelerators offload IPsec and ACL pattern matching, leaving the cores free for routing-protocol and management workloads. Per NXP reference designs, the 1295-FCPBGA package is the canonical footprint for QorIQ P5 communications line cards, simplifying PCB migration across SKUs.
おすすめ
Network Attached Storage (NAS) Controllers
The P5020NSN7MMB557 is well matched to NAS controller designs where two e5500 cores split front-end (network) and back-end (storage) processing. The integrated DDR3 controller with ECC supports the memory bandwidth needed for RAID reconstruction and SMB/NFS serving. PCIe Gen2 lanes connect to multi-port SAS/SATA controllers and 10 GbE NICs, while GbE MACs service the management port. Hardware acceleration reduces CPU overhead for cryptographic file-system operations such as SMB3 encryption. Per NXP/Freescale NAS reference designs, the 1295-FCPBGA package keeps the BOM compact while exposing the required high-speed fabric.
おすすめ
Industrial Networking and Control Gateways
The P5020NSN7MMB557's 0C to +105C operating range and dual e5500 cores make it suitable for industrial protocol gateways bridging EtherCAT, PROFINET, and TCP/IP traffic. The hardware SEC engine accelerates IPsec tunnels over industrial WAN links, and GbE/PCIe/SRIO provide the I/O flexibility to interface with industrial PHY and FPGA co-processors. Multi-protocol support is a hallmark of the QorIQ platform, and the 1295-FCPBGA package allows the same SOM to be reused across gateway product variants. NXP documents long-life availability for industrial segments.
おすすめ
LTE / 4G Base Station Control-Plane
The P5020NSN7MMB557 handles base-station control-plane tasks such as S1-AP, X2-AP, and OAM processing in small-cell and macro-cell deployments. The dual e5500 cores partition signaling and bearer-plane functions, while the DDR3 controller with ECC meets telecom reliability targets. PCIe lanes connect to baseband accelerator cards and GbE/SRIO connect to RF front-end modules. The hardware SEC engine accelerates IPSec and MACsec used in backhaul. Per NXP reference designs for QorIQ communications processors, the 1295-FCPBGA package fits standard ATCA/AMC carrier board layouts.
おすすめ
Secure Routers for Military and Aerospace
The P5020NSN7MMB557's hardware SEC engine (IPsec, SSL, bulk crypto) combined with dual 1.2 GHz cores serves secure router designs for defense and aerospace networking. The integrated GbE and SRIO fabrics support the multi-domain segmentation typical of tactical networks. Extended industrial temperature range (0C to +105C) covers most deployed environments. NXP's QorIQ family has a long track record in defense programs, and the 1295-FCPBGA package is suitable for ruggedized SBC designs.
おすすめ
Smart-Grid Substation Communication
The P5020NSN7MMB557 fits IEC 61850 substation communication controllers where dual e5500 cores run the protocol stack (MMS, SV, GOOSE) while the SEC engine handles authentication for grid cybersecurity. GbE and SRIO interfaces connect to merging units and protection IEDs; PCIe connects to fiber-optic Ethernet PHYs. The 0C to +105C range covers outdoor cabinet deployments. The 1295-FCPBGA package is consistent with other NXP QorIQ substation designs referenced in utility communications literature.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5020NSN7MMB557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5010NSN7MMB | P5020NSN7MMB |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Number of Cores | 2 (e5500) | 1 (e5500) | 2 (e5500) |
| Maximum CPU Clock | 1.2 GHz | 1.2 GHz | 2.0 GHz |
| Core Architecture | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) |
| Memory Controller | DDR3 with ECC | DDR3 with ECC | DDR3 with ECC |
| Integrated Fabric | PCIe, GbE, SRIO, HW Accel | PCIe, GbE, SRIO, HW Accel | PCIe, GbE, SRIO, HW Accel |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C |
主な差別化要因
- Balanced dual-core 1.2 GHz e5500 with hardware crypto offload （vs P5010NSN7MMB)
- Mature silicon revision with documented errata and long-life support （vs Newer QorIQ Layerscape parts)
- Integrated SEC + PATGEN hardware accelerators （vs CPU-only software crypto implementations)
設計ノート
The 1295-FCPBGA package at 1.00 mm ball pitch requires at least an 8-layer PCB stack-up with two buried layers dedicated to power and ground. Use 0.45 mm laser-drilled microvias for inner-layer escape and 0.6 mm mechanical vias for BGA pad-to-inner-layer transitions. Maintain continuous reference planes under high-speed serial lanes (PCIe, SRIO) and route DDR3 signals with matched length groups per the NXP P5020 design guide to preserve signal integrity.
Estimated: at dual-core 1.2 GHz operation with full GbE/PCIe/SRIO utilization, the VDD_CORE rail transient current can exceed 25-30 A. Use a multi-phase VRM with at least 4 phases and a high-quality inductor/capacitor filter network. Decoupling: place 0.1 uF/1 uF/22 uF ceramics on every VDD pin with shortest possible loop to the adjacent GND ball. Verify thermal headroom with the actual workload profile before final VRM selection.
At 1.2 GHz the device dissipates significant power through the package substrate. Use a heatsink with thermal interface material and ensure at least 200 LFM of airflow in production enclosures. For sealed industrial boxes, derate ambient by 10-15 C versus the 105 C maximum. Monitor on-die thermal sensors via the SoC's thermal management unit and throttle clock if Tj approaches limit.
コンプライアンス情報
RoHS and REACH compliance for the P5020NSN7MMB557 was not present in the verified web data; industrial QorIQ P5 family parts from NXP/Freescale are typically RoHS compliant but confirm via the manufacturer declaration before use in restricted markets. AEC-Q100 not applicable (industrial/networking SoC, not automotive).