NXP Semiconductors

PCA9522D - 400kHz Dual Bidirectional Bus Buffer | NXP

部品番号: PCA9522D ✓ 生産中
10 V Vdss 8-lead SOIC Package 400 kHz Speed
MOQ: 1 |

PCA9522D 概要

The NXP Semiconductors PCA9522D is a fast dual bidirectional bus buffer with hot-insertion logic, operating at a maximum bus frequency of 400 kHz and accommodating bus voltages up to 10 V. The device is offered in an 8-lead SOIC package measuring 4.9 mm by 3.9 mm by 1.75 mm, with a 1.27 mm lead pitch. Its bidirectional organization allows signals to travel in either direction between two bus segments while helping isolate the connected systems.

A bidirectional bus buffer is an interface device that re-drives logic signals between two electrical domains. It belongs to the signal-conditioning hierarchy of buffer and repeater ICs, interface ICs, and broader semiconductor components. Unlike a unidirectional logic buffer, a bidirectional buffer supports two-way communication and is particularly useful when a controller may become either the master or the slave on a shared bus. The PCA9522D also includes hot-insertion logic intended to prevent data corruption when connected to a live backplane.

The principal operating characteristics include a 400 kHz maximum bus frequency, one bidirectional buffer channel, operation with bus voltages as high as 10 V, and an 8-pin surface-mount package. Its 1.27 mm lead pitch supports compact PCB layouts while retaining a standard small-outline footprint. The SOIC body dimensions of 4.9 mm by 3.9 mm by 1.75 mm make the device suitable for systems where added buffer isolation is required without moving to a larger package.

Hot-insertion logic is the defining technical feature of the PCA9522. It allows the device to be connected to an energized bus while reducing the likelihood of corruption on the connected backplane. This behavior is valuable in systems with removable modules, pluggable cards, or field-serviceable bus segments. Engineers should still verify power-up sequencing, signal-state requirements, and the maximum voltage present on the bus against the manufacturer's application guidance.

Typical applications include buffered industrial-control buses, communication backplanes, computer buses, hot-pluggable peripheral interfaces, and embedded systems that require a two-way bus segment. The buffer can also isolate cable or board-level loading from a controller's I/O pins, reducing the electrical burden at the originating device when properly terminated and routed.

The most important design consideration is maintaining compatible signal levels and bus timing across the buffered boundary. Place the PCA9522D close to the connector or bus segment that requires isolation, follow the manufacturer's recommended termination and decoupling arrangement, and verify that the 10 V maximum bus-voltage rating covers all normal and transient operating conditions. The exact external-component recommendations should be taken from the manufacturer datasheet.

This page consolidates the NXP product description, package geometry, operating limits, verified drop-in relationship, and application-focused engineering guidance. It also distinguishes verified facts from parameters that still require confirmation before schematic release, qualification, or production sourcing.

ドロップイン代替品: PCA9522D — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

IES5502

✅ ドロップイン
📦 SO8
Maximum bus voltage is 15 V versus 10 V, a 50% increase over the PCA9522D limit

📋 参考代替品(カタログ未掲載)

PCA9522D 仕様

Product Type Dual bidirectional bus buffer with hot-insertion logic
Bidirectional Channels 1 channel
Maximum Bus Frequency 400 kHz
Maximum Bus Voltage 10 V
Hot-Insertion Logic Supported
パッケージ 8-lead SOIC
Lead Pitch 1.27 mm
Package Body Length 4.9 mm
Package Body Width 3.9 mm
Package Body Height 1.75 mm
実装タイプ Surface mount
Terminal Count 8 leads

PCA9522D 1.75 mm ピン配置ガイド

PCA9522D (1.75 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

PCA9522D の 1.75 mm パッケージピン配置図

詳細なピン配置データはありません: PCA9522D.

詳細は データシート をご参照ください。

主な用途

PCA9522D の用途: 6 件s: Hot-Pluggable Industrial Backplanes, Communication Card Isolation, Removable Peripheral Modules, Industrial Sensor Networks, Embedded Field-Service Interfaces, Instrumentation Bus Buffering.

🏭

Hot-Pluggable Industrial Backplanes

The PCA9522D is well suited to industrial backplanes where modules may be connected while the bus is energized. Its hot-insertion logic is intended to reduce data corruption during live insertion, while the bidirectional buffer separates the connected module from the rest of the bus. The device supports bus voltages up to 10 V and a maximum bus frequency of 400 kHz. Engineers should design the connector, ground, supply sequencing, and bus termination so that the 10 V rating is never exceeded and the complete signal path remains within timing limits.

🖥️

Communication Card Isolation

A PCA9522D can isolate a communication card or daughterboard from the host bus while preserving two-way data flow. The 400 kHz maximum bus frequency accommodates many legacy control and peripheral buses, and the 8-lead SOIC package limits board area. Hot-insertion logic adds value when service personnel connect the card during operation. The design must use a manufacturer-approved land pattern and account for signal direction changes, bus termination, and any ground potential difference between the host and peripheral sections.

🔧

Removable Peripheral Modules

The PCA9522D fits removable peripheral modules that share a two-way bus with a controller. Hot-insertion logic helps maintain bus data integrity when a module is attached to a live system, and the 10 V maximum bus voltage covers many legacy peripheral interfaces. Because the buffer re-drives signals in either direction, both sides of the interface can participate in bus transactions. Validate connector sequencing, idle levels, pull-up or pull-down requirements, and the final operating frequency using the application circuit in the NXP documentation.

🧩

Industrial Sensor Networks

A PCA9522D can buffer sensor-hub bus segments when multiple remote sensing modules share a two-way communication line. The 400 kHz rating supports common low-speed industrial field buses, and hot-insertion logic helps protect data when a sensor is connected during operation. The buffer should be placed near the branch connector to isolate cable capacitance and loading from the central controller. Confirm the 10 V bus limit, termination strategy, common-mode behavior, and environmental temperature range before deploying it in factory automation equipment.

⚡

Embedded Field-Service Interfaces

The PCA9522D is useful in field-serviceable embedded systems where a technician may attach a diagnostic or configuration module to an operating bus. Its hot-insertion logic helps avoid corruption when live connection is unavoidable, and its bidirectional operation supports command and response traffic over the same conductors. The 8-lead SOIC package fits compact controller boards, but the interface still requires careful grounding and transient protection. Production designs should validate connector construction, power-off behavior, bus voltage, and repeated insertion cycles for the intended equipment.

🔬

Instrumentation Bus Buffering

The PCA9522D can buffer instrumentation buses when longer interconnects, connector transitions, or multiple branches increase loading. Its bidirectional operation preserves two-way command and measurement traffic, while the 400 kHz bus limit defines the usable signaling rate. In measurement systems, place the buffer where it can isolate the remote branch and minimize the distance over which high capacitance or reflections are likely to occur. Validate logic thresholds, rise and fall times, termination, grounding, and the 10 V maximum bus rating before instrumentation use.

What is the PCA9522D used for?
The PCA9522D is a fast dual bidirectional bus buffer with hot-insertion logic for isolating and re-driving communication buses. According to the NXP product information, it operates up to 400 kHz and supports bus voltages up to 10 V. Its bidirectional structure allows traffic to move in either direction between two bus segments, while the hot-insertion function helps prevent data corruption when the device is connected to a live backplane.
What is the maximum bus frequency of the PCA9522D?
The PCA9522D supports a maximum bus frequency of 400 kHz. The DigiKey product listing identifies the device as a one-channel, 400 kHz redriver, while the NXP product page describes it as a fast dual bidirectional bus buffer. This rating is the principal timing limit to consider when placing the buffer between two bus segments and should be checked against the signal rate and loading of the complete interconnect.
Where can I download the PCA9522D datasheet PDF?
The official PCA9522D information is available from the NXP product page at https://www.nxp.com/products/PCA9522D. The PCA9522D is described as a fast dual bidirectional bus buffer with hot-insertion logic, and the product information also identifies the 8-lead SOIC package. Use the manufacturer datasheet for the authoritative pin description, electrical limits, timing characteristics, recommended application circuit, and package drawings before finalizing a design.
Where can I find the PCA9522D pinout?
The PCA9522D pinout is published in the NXP manufacturer datasheet associated with the official product page. The verified package information identifies an 8-lead SOIC with a 1.27 mm lead pitch and a 4.9 mm by 3.9 mm by 1.75 mm body. Use the datasheet pin-description table when assigning traces because the exact function and configuration of every terminal must be taken from the manufacturer drawing.
What bus voltage can the PCA9522D handle?
The PCA9522D accommodates bus voltages up to 10 V. NXP specifically describes the device as a drop-in replacement for the IES5502, with the maximum bus voltage reduced from 15 V to 10 V. Confirm that every bus node remains below this limit during normal operation and transient events, particularly in hot-pluggable systems where voltage can change while the connection is being established.
Can the PCA9522D be inserted into a live backplane?
Yes, the PCA9522D includes hot-insertion logic specifically for connecting to a live backplane while reducing the risk of bus data corruption. NXP identifies this capability as a defining feature of the device. Hot-insertion support does not remove the need to verify supply sequencing, signal levels, bus voltage, grounding, and application-specific connector requirements in the final system.
What is the PCA9522D package?
The PCA9522D is packaged in an 8-lead plastic small-outline integrated-circuit package, commonly identified as SO8. The verified package information gives a 1.27 mm lead pitch and body dimensions of 4.9 mm by 3.9 mm by 1.75 mm. It is a surface-mount component, and PCB land patterns should be created from the package drawing in the NXP datasheet rather than inferred solely from the body dimensions.
Is the PCA9522D still suitable for new industrial-control designs?
The PCA9522D remains relevant when a design needs bidirectional bus buffering together with hot-insertion protection at bus voltages up to 10 V. Its 400 kHz operating rating is suitable for many control and communication buses, but the complete system timing must remain below that limit. Check lifecycle, operating-temperature, supply-voltage, and qualification requirements against the current manufacturer documentation before committing it to a new production design.
Where can I buy PCA9522D parts and check current availability?
Use the Request a Quote form on this page to request current PCA9522D availability, order quantities, and delivery information for your project. The request should specify the exact PCA9522D MPN, required quantity, and packaging preference. Because inventory and commercial terms can change, obtain a written quotation for the quantity and date required rather than relying on an outdated catalog record.
How much does the PCA9522D cost?
Current PCA9522D pricing depends on order quantity, packaging, and supply conditions and is not fixed on this page. Submit a Request a Quote request with the quantity, target date, and shipment location to obtain current commercial terms. The historical price shown in the structured record is retained only for sourcing context and should not be treated as a current quotation.
What is the lead time for PCA9522D?
The current lead time must be confirmed for the requested quantity and packaging through the Request a Quote form on this page. Lead time can change with component availability, manufacturing conditions, and order size. For safety-critical or production schedules, request written confirmation of the delivery commitment and any acceptable alternate manufacturing or packaging conditions.
What is the best drop-in replacement for the PCA9522D?
The NXP product page identifies the IES5502 as a drop-in replacement for the PCA9522D, with one important qualification: the IES5502 supports bus voltages up to 15 V, while the PCA9522D supports up to 10 V. The PCA9522D should therefore be selected for a replacement when the bus can exceed 10 V, and the IES5502 should not be selected when that wider voltage range is unnecessary or otherwise undesirable.
Can the IES5502 replace the PCA9522D?
Yes, NXP explicitly identifies the PCA9522D as a drop-in replacement for the IES5502, but their maximum bus-voltage ratings differ. The IES5502 accommodates 15 V, while the PCA9522D is limited to 10 V. For a 10 V-or-lower bus, the IES5502 is the documented replacement; for a bus that can exceed 10 V, retaining the PCA9522D avoids violating its voltage rating.
PCA9522D vs IES5502: which one should I choose?
Choose the PCA9522D when the bus remains at or below 10 V and you want the NXP implementation of the documented hot-pluggable bidirectional-buffer solution. Choose the IES5502 when its higher 15 V maximum bus-voltage rating is required. NXP describes the PCA9522D as a drop-in replacement for the IES5502, but the reduced voltage ceiling is a functional constraint that must be respected.
When should I choose the PCA9522D instead of the IES5502?
Choose the PCA9522D when your bus voltage is guaranteed not to exceed 10 V and when its documented hot-insertion behavior is appropriate for the application. The IES5502 is the better choice only when operation above 10 V is a genuine requirement because its maximum bus-voltage rating is 15 V. Both devices can share the same replacement position according to NXP, making voltage rating the decisive selection criterion.

エンジニアリング参考データ: PCA9522D — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PCA9522D when the design requires a bidirectional, 400 kHz-capable bus buffer with hot-insertion logic and the bus remains at or below 10 V. Its 8-lead SOIC package is appropriate for compact boards, and its live-insertion behavior is useful for serviceable or pluggable interfaces. The IES5502 is the documented drop-in alternative, but it offers a higher 15 V maximum bus-voltage rating, making it the more appropriate choice when that additional voltage range is required rather than merely desirable. If neither option can meet the required temperature, supply-voltage, timing, or environmental limits, the substitution should not be made solely on package compatibility. Verify the final choice against the manufacturer application circuit, PCB land pattern, and the complete bus standard.

代替品との比較

パラメータ この製品 IES5502
Brand NXP Semiconductors IES
Package 8-lead SOIC SO8
Product Type Dual bidirectional bus buffer with hot-insertion logic Bidirectional bus buffer
Maximum Bus Voltage 10 V 15 V
Maximum Bus Voltage Difference 10 V baseline 15 V, 5 V higher
Documented Replacement Relationship Drop-in replacement for IES5502 Replaced by PCA9522D with reduced maximum bus voltage

主な差別化要因

  • Documented replacement relationship with a lower voltage ceiling (vs IES5502)
  • Hot-insertion protection for live backplane connections (vs IES5502)
  • Defined operation for a 400 kHz bus (vs IES5502)

設計ノート

Place the PCA9522D near the connector or branch that requires isolation so the protected bus segment does not carry the full cable or backplane load back to the controller. Use the land pattern from the NXP package drawing for the 8-lead SOIC with a 1.27 mm lead pitch. Keep the high-speed bus traces short and continuous, and avoid routing the buffered segment through areas with nearby switching circuitry or long parallel spans.

Do not assume that a drop-in relationship permits unrestricted voltage substitution. The PCA9522D supports bus voltages up to 10 V, whereas the IES5502 supports up to 15 V. Installing the IES5502 in a PCA9522D position changes the voltage ceiling rather than preserving every operating limit. Verify the maximum normal and transient bus voltage, as well as signal thresholds and timing, before approving the substitution.

Treat the two sides of the PCA9522D as separate routed buses and apply the termination strategy recommended in the manufacturer application information. Account for bidirectional signal direction when inspecting waveforms and avoid unnecessary stub branches at the buffer. The device supports operation up to 400 kHz, but the lower limit may be set by cable length, loading, connector geometry, or the bus standard rather than by the buffer itself.

Follow the manufacturer's supply and decoupling requirements when powering the PCA9522D, especially in systems where live insertion is expected. Provide a low-impedance return path between the host and inserted module, and confirm that supply startup cannot force an excessive bus level while the connector is mating. The verified 10 V rating applies to the bus voltage and should not be interpreted as permission to exceed separately specified supply or absolute-maximum limits.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified in the manufacturer and distributor pages. Confirm compliance for the exact ordered MPN and package before production release.

関連検索

PCA9522D datasheet PCA9522D pinout PCA9522D datasheet pdf PCA9522D SO8 package PCA9522D 400kHz bus buffer PCA9522D 10V bus voltage PCA9522D hot insertion logic PCA9522D drop-in replacement PCA9522D vs IES5502 PCA9522D equivalent PCA9522D price NXP PCA9522D PCA9522D backplane buffer

関連部品&用語

NXP Semiconductors PCA9522D IES5502 bidirectional bus buffer bus buffer bus repeater signal buffer interface IC semiconductor hot-insertion logic live backplane I2C-bus 400 kHz 10 V maximum bus voltage 15 V maximum bus voltage 8-lead SOIC SO8 package 1.27 mm lead pitch surface mount PCA9515APWR PCF8574ADWR RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示