PIC12F519-I/MS - 8MHz 8-Bit Flash MCU | Microchip
部品番号: PIC12F519-I/MS ✓ 生産中PIC12F519-I/MS 概要
A microcontroller is a programmable semiconductor device that combines a CPU core, memory, digital I/O, and embedded control peripherals on one integrated circuit. The PIC12F519 belongs to the PIC12 family of 8-bit RISC microcontrollers. Its compact 8-pin MSOP package is useful for space-constrained products, while Flash memory supports in-circuit programming and firmware updates compared with older ROM-based or one-time-programmable devices.
The PIC12F519-I/MS uses only 33 single-word, single-cycle instructions, with program branches taking two cycles. It supports direct, indirect, and relative addressing modes for data and instructions, and includes a two-level hardware stack. These features make the device suitable for simple control logic, sensor interfaces, status indicators, and low-to-moderate processing tasks where deterministic execution and low component count are more important than high processing throughput.
The device is specified for an 8 MHz internal clock and includes 1.5 KB of Flash program memory. Microchip describes the PIC12F519 as a low-cost, high-performance, fully static Flash-based CMOS MCU. Its architecture emphasizes compact code density and simple application development, while its eight-pin package limits the available I/O count compared with larger PIC devices.
Typical uses include building automation controllers, compact sensor nodes, appliance control boards, LED-status controllers, battery-operated accessories, and small industrial monitoring modules. The small MSOP-8 package also enables compact products where PCB area is constrained, although designers should account for the limited number of pins and verify the required communications, analog, and timing functions against the manufacturer pin description.
When laying out a PCB, follow the manufacturer package drawing and pin-description tables exactly. Confirm oscillator, programming, reset, supply, and I/O requirements before committing the footprint, and provide the decoupling and programming access specified by the device documentation. Firmware validation should include startup behavior, oscillator configuration, brownout conditions, and all used I/O states.
This page organizes the PIC12F519-I/MS specifications, sourcing information, package details, application guidance, and verified same-package replacement candidates into one engineering-focused reference for embedded product development.
ドロップイン代替品: PIC12F519-I/MS — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC12F519-I/MS （同一形状・フットプリント） — 相違点: Instruction Set, Package, Program Memory Size.
PIC12F519-E/MS
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC12F519-I/MS 最大定格＆電気的特性
| Microcontroller Type | 8-bit RISC Flash-based CMOS microcontroller |
| Maximum Internal Clock Speed | 8 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 1.5 KB |
| Program Memory Organization | 1K x 12 words |
| Instruction Set | 33 single-word instructions |
| Instruction Cycle Time | 1 cycle for most instructions; 2 cycles for program branches |
| Addressing Modes | Direct, indirect, and relative |
| Hardware Stack Depth | 2 levels |
| I/O Port Count | 1 port with 6 I/O pins |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 8-pin MSOP |
| 実装タイプ | Surface mount |
| Product Lifecycle Stage | Active |
| Lead-Free Package | Lead-free plastic package |
| Processor Architecture | Harvard architecture |
| Static Operation | Fully static |
| Code Protection | Program-memory code protection |
PIC12F519-I/MS lead-free plastic package ピン配置ガイド
PIC12F519-I/MS (lead-free plastic package パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC12F519-I/MS.
詳細は データシート をご参照ください。
主な用途
PIC12F519-I/MS の用途: 6 件s: Compact Sensor Interface Controller, Appliance and Household Control, Industrial Status and Alarm Module, LED Lighting and Display Control, Battery-Powered Accessory Controller, Building Automation Endpoint.
Compact Sensor Interface Controller
The PIC12F519-I/MS fits compact sensing modules that translate switch, resistive, or simple digital sensor inputs into a control action. Its 8-bit RISC core, 8 MHz internal operating speed, and 1.5 KB of Flash program memory are sufficient for sampling, debouncing, thresholding, and state-machine control. The 8-pin MSOP package also preserves board area in devices where sensor conditioning, status indication, and a small serial interface share one compact controller. Use the manufacturer pin descriptions to assign the I/O and confirm that the selected sensing method does not require resources beyond the six available I/O pins.
おすすめ
Appliance and Household Control
The PIC12F519-I/MS is well suited to simple appliance controls that combine button inputs, LEDs, relays, or small actuators. Its 33 single-word instructions and one-cycle execution for most instructions support responsive control logic, while the 1.5 KB Flash memory can store state machines, debounce routines, and output timing. The 8-pin MSOP outline is valuable in space-constrained household products and permits a low component-count design. Because the package has only eight pins, validate the required relay-driver, sensing, and communications functions before selecting the MCU for a specific appliance architecture.
おすすめ
Industrial Status and Alarm Module
The PIC12F519-I/MS can implement a compact industrial status module that monitors discrete inputs and drives LEDs, buzzers, or digital outputs. Its fully static CMOS architecture supports low-power standby operation when the application can tolerate wake-up latency, and the 8 MHz internal clock provides sufficient throughput for deterministic supervisory logic. The industrial-temperature ordering option is specified for -40 °C to +85 °C. Use isolation, surge protection, and appropriate drive transistors when connecting the controller to long cables or higher-energy industrial loads.
おすすめ
LED Lighting and Display Control
The PIC12F519-I/MS can control LED status indicators, decorative lighting, or simple display patterns where the required behavior is driven by a limited number of digital outputs. Its 1.5 KB of Flash memory is sufficient for lookup tables and timing sequences, while the compact 8-pin MSOP package leaves PCB space for the LEDs and their drivers. For low-current indicator LEDs, current limiting and switching details must be designed around the specific I/O characteristics. For larger lighting loads, use suitable transistors and keep the MCU supply and ground paths separated from high-current return paths.
おすすめ
Battery-Powered Accessory Controller
The PIC12F519-I/MS suits compact battery-powered accessories that wake periodically, inspect a button or sensor, update an indicator, and return to a low-power state. Its fully static operation and small 8-pin MSOP package help reduce board size, while its simple RISC instruction set makes short control routines easy to implement. Battery-life optimization requires selecting the appropriate clock and low-power modes, disabling unused peripherals, and minimizing wake-up activity. Validate leakage, sleep current, and the external pull network in the assembled design rather than relying only on microcontroller headline specifications.
おすすめ
Building Automation Endpoint
The PIC12F519-I/MS can serve as an endpoint controller in a small building-automation node that handles occupancy switches, temperature-related discrete thresholds, or actuator commands. Its six I/O pins are useful for basic distributed control, while the 8 MHz RISC core handles protocol framing and deterministic state transitions within the 1.5 KB program-memory limit. The small surface-mount package supports compact wall modules and sensor nodes. Confirm protocol requirements, timing, bus capacitance, and isolation needs; a larger MCU may be necessary when the endpoint must support multiple buses or more complex networking.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC12F519-I/MS — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC12F519-E/MS |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-pin MSOP | 8-pin MSOP |
| Processor Architecture | 8-bit RISC | 8-bit RISC |
| Maximum Internal Clock Speed | 8 MHz | 8 MHz |
| Program Memory | 1.5 KB Flash | 1.5 KB Flash |
| Program Memory Organization | 1K x 12 words | 1K x 12 words |
| I/O Port Count | 1 port with 6 I/O pins | 1 port with 6 I/O pins |
| Instruction Count | 33 single-word instructions | 33 single-word instructions |
主な差別化要因
- Compact eight-pin implementation （vs PIC12F519-E/MS)
- Single-cycle-oriented RISC execution （vs PIC12F519-E/MS)
- Flash-based configuration and updates （vs PIC12F519-E/MS)
設計ノート
Use the official 8-pin MSOP package drawing and pin-description table to create the PCB footprint and assign signals. Confirm land pattern dimensions, pin-one orientation, and exposed or non-exposed pad details directly from the manufacturer documentation. Keep programming access, supply decoupling, ground, and all required I/O routes short, and review the final assembly orientation against the package marking to prevent reversed placement.
Place the required supply-decoupling capacitor close to the VDD and VSS connections, with a low-inductance return path to the ground plane. Because this is an 8-pin device, pin allocation must be resolved before layout rather than treating all pins as interchangeable I/O. Validate operating and sleep currents in the finished assembly, including external pull resistors, indicator LEDs, and any attached sensor, because accessory current can dominate the MCU’s consumption.
Do not select a substitute solely because it has eight pins. Confirm that the candidate is an 8-pin MSOP PIC12F519 variant, compare the ordering-code temperature grade, and verify program memory, clock, I/O count, programming procedure, and supply limits. PIC12F519 variants in SOIC or other small packages may use a different footprint. Any change should pass schematic review, firmware validation, timing checks, and manufacturing test before production release.
For external switches, long wires, or noisy control inputs, protect MCU pins with appropriate resistors, clamps, and filtering and route them away from switching nodes. Keep ground returns compact and prevent high-current LED or relay returns from sharing narrow paths with sensitive controller ground. If the design uses a communication bus, calculate rise time, capacitance, and logic-level margins at the slowest supported bus rate rather than assuming an 8 MHz internal clock guarantees adequate communication margin.
コンプライアンス情報
The DigChip product record identifies the package as lead-free plastic. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status were not explicitly confirmed for the exact MPN.
