PIC16C57-LPI/SP - 8-Bit OTP MCU, 2KB EPROM, 20 I/O | Microchip
部品番号: PIC16C57-LPI/SP ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.1 | $4.10 |
| 10 | $3.65 | $36.50 |
| 100 | $3.2 | $320.00 |
| 500 | $2.85 | $1,425.00 |
| 1,000 | $2.5 | $2,500.00 |
PIC16C57-LPI/SP 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable I/O peripherals into one package, and is the fundamental building block of embedded systems. The PIC16C5X architecture falls into the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Its 12-bit wide instruction set delivers 2:1 code compression versus typical 8-bit CISC competitors, which lets designers fit more application code into the same program-memory footprint while simplifying instruction decoding.
Key features include a RISC architecture with only 33 single-word/single-cycle instructions, a hardware 8-bit timer/counter (TMR0) with an 8-bit programmable prescaler, a watchdog timer with its own on-chip RC oscillator for reliable recovery, and a power-saving SLEEP mode. The device also includes an EPROM-based code memory (one-time programmable, factory or field programmed via UV/OTP programmers) and supports in-circuit serial programming (ICSP) on most derivatives. Brown-out and reset circuitry are integrated, providing clean startup behavior across the industrial temperature range.
Typical applications include low-cost consumer appliances, remote controls, automotive body controllers, security keypads, sensor-interface nodes, small motor drivers, battery chargers, and any high-volume, cost-sensitive embedded design where the OTP memory model is acceptable. The wide 3.0V-6.0V supply and -40C to +85C industrial temperature range also suit industrial telemetry and instrumentation front-ends.
When designing with the PIC16C57-LPI/SP, observe that the PIC16C5X core lacks interrupts and interrupt-context hardware stacking; all timing-critical events must be polled. Use the watchdog timer to recover from code-flow lockups, and place decoupling capacitors (100 nF ceramic plus 10 uF bulk) within 5 mm of VDD/VSS to keep the internal EPROM read path stable.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers and procurement teams select and source the PIC16C57-LPI/SP with confidence.
ドロップイン代替品: PIC16C57-LPI/SP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16C57-LPI/SP （同一形状・フットプリント） — 相違点: Timers, Package, Program Memory Size, Program Memory Type, Core Architecture.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16C57-LP/P
✅ ドロップイン✓ 在庫あり
$1.74 / 個
データシートを見る →PIC16C57-HSI/SP
✅ ドロップイン✓ 在庫あり
$2.7 / 個
データシートを見る →PIC16C57-LPE/SP
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16C57-HSI/P
✅ ドロップイン✓ 在庫あり
$1.89 / 個
データシートを見る →PIC16C57-HS/P
✅ ドロップイン✓ 在庫あり
$4.62 / 個
データシートを見る →PIC16C57-10I/P
✅ ドロップイン✓ 在庫あり
$1.75 / 個
データシートを見る →PIC16C57-LPI/SP 最大定格＆電気的特性
| Core Architecture | 8-bit PIC16C5X RISC |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 2 KB (2K x 12) |
| RAM Size | 72 bytes |
| Maximum CPU Speed | 40 MHz (10 MIPS equivalent at 40 MHz input) |
| Operating Frequency (LP oscillator) | 40 kHz |
| Supply Voltage (VDD) | 3.0 V to 6.0 V |
| I/O Pins | 20 |
| Number of I/O Ports | 3 (PORTA, PORTB, PORTC) |
| Timers | 1 x 8-bit (TMR0) with 8-bit prescaler |
| Watchdog Timer | Yes, with dedicated on-chip RC oscillator |
| Instruction Set Width | 12 bits |
| Number of Instructions | 33 |
| 動作温度範囲 | -40 C to +85 C (industrial) |
| パッケージ | 28-pin SPDIP (0.300 in, 7.62 mm) |
| 実装タイプ | Through-hole |
| RoHS ステータス | Compliant |
PIC16C57-LPI/SP ピン構成
| ピン 1 | RA2 — Bidirectional I/O, PORTA bit 2 |
| ピン 2 | RA3 — Bidirectional I/O, PORTA bit 3 |
| ピン 3 | RTCC — RTCC input / TMR0 clock (also PORTA bit 4) |
| ピン 4 | /MCLR — Master Clear reset input, active low |
| ピン 5 | VSS — Ground reference |
| ピン 6 | RB0 — Bidirectional I/O, PORTB bit 0 |
| ピン 7 | RB1 — Bidirectional I/O, PORTB bit 1 |
| ピン 8 | RB2 — Bidirectional I/O, PORTB bit 2 |
| ピン 9 | RB3 — Bidirectional I/O, PORTB bit 3 |
| ピン 10 | RB4 — Bidirectional I/O, PORTB bit 4 |
| ピン 11 | RB5 — Bidirectional I/O, PORTB bit 5 |
| ピン 12 | RB6 — Bidirectional I/O, PORTB bit 6 |
| ピン 13 | RB7 — Bidirectional I/O, PORTB bit 7 |
| ピン 14 | VSS — Ground reference (secondary) |
| ピン 15 | OSC1 — Crystal/oscillator input, LP mode |
| ピン 16 | OSC2 — Crystal/oscillator output, LP mode |
| ピン 17 | RC0 — Bidirectional I/O, PORTC bit 0 |
| ピン 18 | RC1 — Bidirectional I/O, PORTC bit 1 |
| ピン 19 | RC2 — Bidirectional I/O, PORTC bit 2 |
| ピン 20 | RC3 — Bidirectional I/O, PORTC bit 3 |
| ピン 21 | RC4 — Bidirectional I/O, PORTC bit 4 |
| ピン 22 | RC5 — Bidirectional I/O, PORTC bit 5 |
| ピン 23 | RC6 — Bidirectional I/O, PORTC bit 6 |
| ピン 24 | RC7 — Bidirectional I/O, PORTC bit 7 |
| ピン 25 | RA0 — Bidirectional I/O, PORTA bit 0 |
| ピン 26 | RA1 — Bidirectional I/O, PORTA bit 1 |
| ピン 27 | VDD — Positive supply voltage (3.0 V to 6.0 V) |
| ピン 28 | VDD — Positive supply voltage (secondary) |
主な用途
PIC16C57-LPI/SP の用途: 7 件s: Remote Control Transmitter, Consumer Appliance Controller, Security Keypad Module, Battery-Powered Sensor Node, Automotive Body Electronics, Industrial Telemetry Front-End, Simple LED Display Driver.
Remote Control Transmitter
The PIC16C57-LPI/SP suits handheld remote controls because its LP (low-power) oscillator mode minimizes active current at the 40 kHz watch-crystal frequency typical of IR or RF carrier generation. With 20 digital I/O pins and an 8-bit TMR0 prescaler, the device can scan a 4x4 key matrix, encode button presses into a serial protocol, and drive an IR LED directly via a PORTC pin. Its 2 KB OTP program memory fits most fixed-command code maps, and the 3.0-6.0 V supply range accepts two AA cells without a regulator.
おすすめ
Consumer Appliance Controller
For small kitchen or personal-care appliances, the PIC16C57-LPI/SP delivers sufficient code space for state machines driving relays, triacs, and segment LEDs. The 8-bit PIC16C5X RISC core executes one instruction per oscillator cycle, giving deterministic loop timing for triac zero-crossing routines. Industrial -40C to +85C operation handles appliance thermal stress, and the 28-pin SPDIP package is socket-friendly for factory programming and field service.
おすすめ
Security Keypad Module
The PIC16C57-LPI/SP is well matched to 4x4 or 3x4 matrix keypads thanks to its 20 I/O pins, which can scan the matrix and drive status LEDs without external glue logic. The integrated watchdog timer recovers from code lockups if a button is held indefinitely, and SLEEP mode drops quiescent current for battery-backed panels. Industrial temperature rating supports outdoor and unconditioned installations, while OTP memory keeps unit cost minimal for high-volume alarm SKUs.
おすすめ
Battery-Powered Sensor Node
In battery-powered sensor endpoints, the PIC16C57-LPI/SP's LP oscillator mode at 40 kHz dramatically reduces active current, and the SLEEP instruction combined with watchdog wakeup yields multi-year coin-cell life for periodic telemetry. The 8-bit TMR0 with prescaler provides accurate 1-second timing without an external RTC, and 20 I/O pins support I2C, SPI, or UART bit-banged interfaces to external sensors. Wide 3.0-6.0 V supply accepts varied battery chemistries directly.
おすすめ
Automotive Body Electronics
The PIC16C57-LPI/SP handles small automotive body-control tasks such as seat controllers, lighting timers, and simple HVAC mode switches. Industrial -40C to +85C operation matches under-dash thermal environments, and 20 I/O pins drive MOSFETs and read switches directly. The 2 KB OTP memory is sufficient for fixed-function body code; for AEC-Q100 qualified builds, consider Microchip's automotive-grade PIC16F equivalent instead.
おすすめ
Industrial Telemetry Front-End
For industrial sensor aggregators, the PIC16C57-LPI/SP runs Modbus RTU over RS-232 or RS-485 with bit-banged UART on PORTC, while the 8-bit timer drives precise polling intervals. Its 3.0-6.0 V supply accepts 24 V industrial bus power after a small LDO, and the 28-pin SPDIP package is socket-friendly for field replacement. Wide industrial temperature rating handles factory-floor heat, and the watchdog timer recovers from communication glitches.
おすすめ
Simple LED Display Driver
The PIC16C57-LPI/SP can multiplex 7-segment LED displays or LED matrices by bit-banging rows and columns directly from its 20 I/O pins, using TMR0 interrupts (or polled timing) to refresh at 100 Hz to avoid flicker. The 2 KB OTP program memory stores lookup tables for numerals, characters, and animations, and the LP oscillator mode keeps power consumption low for battery-operated signage. The 28-pin SPDIP package eases breadboarding and small-batch production.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16C57-LPI/SP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16C57-LP/P | PIC16C57-HSI/SP | PIC16C57-LPE/SP |
|---|---|---|---|---|
| Package | 28-pin SPDIP | 28-pin SPDIP - same | 28-pin SPDIP - same | 28-pin SPDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 2 KB OTP EPROM | 2 KB OTP EPROM | 2 KB OTP EPROM | 2 KB OTP EPROM |
| RAM | 72 bytes | 72 bytes | 72 bytes | 72 bytes |
| I/O Pins | 20 | 20 | 20 | 20 |
| Oscillator Mode | LP (40 kHz low-power) | LP (40 kHz low-power) | HS (4-20 MHz high-speed) | LP (40 kHz low-power) |
| Operating Temperature | -40 C to +85 C (industrial) | 0 C to +70 C (commercial) | -40 C to +85 C (industrial) | -40 C to +125 C (extended) |
| Supply Voltage | 3.0 V to 6.0 V | 3.0 V to 6.0 V | 3.0 V to 6.0 V | 3.0 V to 6.0 V |
主な差別化要因
- Lowest active current in PIC16C57 family via LP oscillator mode （vs PIC16C57-HSI/SP)
- Industrial temperature range vs commercial-grade siblings （vs PIC16C57-LP/P)
- Drop-in pin compatibility with the entire PIC16C57 SPDIP-28 family （vs PIC16F57-I/SP)
設計ノート
Estimated: at 40 kHz LP oscillator and 5 V VDD, the PIC16C57-LPI/SP active current is typically below 1 mA. Place a 100 nF ceramic decoupling capacitor within 5 mm of VDD (pin 27) and a 10 uF bulk capacitor at the board entry point. In SLEEP mode, current drops to a few microamps; the watchdog timer can be configured to wake the device at fixed intervals for ultra-low-power duty-cycled sensing.
Keep the 28-pin SPDIP socket footprint clean and oriented with pin 1 marker visible. The PIC16C5X core is robust but the EPROM program memory is sensitive to VDD noise during read cycles; route VDD/VSS traces wide (>= 0.5 mm) and keep the OSC1/OSC2 traces short and symmetric to the crystal or resonator to minimize clock jitter at the 40 kHz LP frequency.
The PIC16C5X core has no hardware interrupt controller and no interrupt-context hardware stack; all timing events must be polled in the main loop. Always enable the watchdog timer in OPTION register for unattended applications, otherwise a code lockup will hang the device permanently. EPROM is one-time-programmable - verify code with a windowed or Flash equivalent before committing production units.
Estimated: the 40 kHz LP oscillator is highly sensitive to capacitive loading on OSC1/OSC2. Use a low-ESR watch crystal with a load capacitance matched to the crystal specification (typically 6-12 pF), and route OSC traces away from switching nodes and I/O edges to avoid clock corruption in electrically noisy environments such as triac zero-crossing or relay-coil circuits.
コンプライアンス情報
RoHS and REACH compliance per Microchip product declaration. Not AEC-Q100 qualified - this part targets industrial/commercial use, not automotive safety-critical applications. For automotive, evaluate AEC-Q100 qualified Flash alternatives.
