Microchip Technology

PIC16C77-04E/P - 8-bit CMOS MCU, 14KB EPROM, 4MHz | Microchip

部品番号: PIC16C77-04E/P ✓ 生産中
在庫あり 1〜3営業日以内に発送
2.5 V to 6.0 V Vdss 25 mA / 25 mA Id 40-pin PDIP (windowed CERDIP) Package 4 MHz Speed OTP EPROM (CMOS) Memory
開始価格 $10.7 USD / 個
MOQ: 1 |
価格更新日: 2026-09-18
ボリューム価格
数量 単価 小計
1 $17.01 $17.01
10 $15.31 $153.10
100 $13.61 $1,361.00
500 $12.07 $6,035.00
1,000 $10.7 $10,700.00
ℹ️ すべての価格はUSDです

PIC16C77-04E/P 概要

The Microchip Technology PIC16C77-04E/P is an 8-bit CMOS RISC microcontroller with integrated 8-channel 8-bit A/D converter, housed in a 40-pin PDIP (windowed CERDIP) package. The device executes instructions at 200 ns cycle time, runs at 4 MHz maximum operating frequency, and features 14 KB (8K x 14) of one-time-programmable EPROM program memory with 368 bytes of RAM and 33 digital I/O lines.

An 8-bit CMOS microcontroller is a single-chip computer that integrates a CPU, memory (ROM/RAM), and programmable I/O peripherals on one silicon die. The PIC16C77 belongs to the mid-range PIC16C family, which sits hierarchically above base-line PIC16C5X devices and below enhanced PIC18 architectures. CMOS technology provides low static power consumption and high noise immunity compared to NMOS predecessors, making these MCUs suitable for battery-powered and industrial applications.

Key features of the PIC16C77-04E/P include a wide operating voltage range of 2.5V to 6.0V, high sink/source current capability of 25 mA/25 mA per I/O pin, and low-power consumption of 15 µA typical at 5V/4 MHz and 1 µA typical standby at 3V/32 kHz. The device supports commercial, industrial, and extended temperature ranges, and incorporates a high-performance RISC CPU with only 35 single-word instructions to learn, all single-cycle except for program branches.

The architecture uses a Harvard-style separate instruction and data bus with a 14-bit instruction word optimized for compiled C code density. The integrated ADC delivers 8 channels of 8-bit resolution, supporting direct interface with analog sensors. A synchronous serial port (SSP), USART, and capture/compare/PWM modules provide flexible peripheral integration for motor control, communication, and timing applications.

Typical applications include industrial control systems, instrumentation, automotive body controllers (non-AEC-Q100 qualified), sensor signal conditioning with on-chip ADC, and embedded consumer products requiring OTP program memory. The wide voltage range makes it well-suited to 5V regulated designs and battery-backed systems.

When designing with this device, remember that the 'C' suffix denotes CMOS EPROM-based OTP memory, which is one-time programmable and not field-erasable. For modern designs consider the flash-based PIC16F877A or PIC18F4550 in compatible pin footprints. A minimum of 2.0V must be maintained on VDD during operation to prevent brown-out; use the built-in BOR module for robust reset behavior.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a complete reference for sourcing and designing the PIC16C77-04E/P.

ドロップイン代替品: PIC16C77-04E/P — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PIC16C77-04E/P (同一形状・フットプリント) — 相違点: Core Architecture, Mounting Type, Data RAM, Operating Temperature Range, Package Type.

Microchip Technology
Core Architecture: PIC16CXX 8-bit RISC (Harvard)
Data RAM: 192 bytes
Package Type: 40-pin PDIP (Plastic DIP, through-hole)
Microchip Technology
Core Architecture: PIC16CXX mid-range 8-bit RISC (Harvard)
Mounting Type: Through-Hole
Data RAM: 256 bytes

クイック比較ツール — 並列比較する代替部品を選択:

PIC16C765-I/P

✅ ドロップイン
Microchip Technology
📦 40-PDIP (P)
PIC16CXX mid-range 8-bit RISC (Harvard) · 14 KB OTP (8K x 14 words) · 256 bytes · None (OTP only) · 24 MHz (167 ns instruction cycle) · Approximately 6 MIPS · 35 single-word instructions · 4.0 V to 5.5 V

✓ 在庫あり

$5.1 / 個

データシートを見る →

PIC16F74-I/P

✅ ドロップイン
📦 40-PDIP (P)
Flash-based, no integrated ADC; same 40-PDIP per ETEI comparison - param delta: missing ADC channels

📋 参考代替品(カタログ未掲載)

PIC16C74B-04I/P

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 40-PDIP (P)
PIC16CXX 8-bit RISC (Harvard) · PIC16 mid-range · 4 MHz · 200 ns · 7 KB (4K x 14) OTP · OTP (One-Time Programmable) EPROM · 192 bytes · None (none on die for this OTP MCU)

✓ 在庫あり

$5.55 / 個

データシートを見る →

PIC16F877-04E/P

✅ ドロップイン
📦 40-PDIP (P)
Flash-based upgrade, same 40-PDIP, integrated ADC; recommended replacement per DigiKey cross-reference

📋 参考代替品(カタログ未掲載)

ℹ️ 4 異なるパッケージの部品は非表示 — パッケージが異なるとPCBの作り直しが必要で、真のドロップイン代替品ではありません。 お問い合わせ 異なるパッケージの提案が必要な場合。

PIC16C77-04E/P 最大定格&電気的特性

Core Architecture 8-bit PIC16C mid-range RISC
Program Memory Type OTP EPROM (CMOS)
Program Memory Size 14 KB (8K x 14)
RAM Size 368 bytes
Maximum Clock Speed 4 MHz
Instruction Cycle Time 200 ns
Supply Voltage Range 2.5 V to 6.0 V
I/O Pins 33
ADC 8 channels, 8-bit resolution
Package Type 40-pin PDIP (windowed CERDIP)
動作温度範囲 -40C to +125C (Extended, 'E' suffix)
I/O Sink/Source Current 25 mA / 25 mA
Typical Active Current 15 µA at 5V / 4 MHz
Typical Standby Current 1 µA at 3V / 32 kHz
Number of Instructions 35 single-word
ROM Type (per FindIC) UVPROM (windowed ceramic)
実装タイプ Through-Hole (DIP)
RoHS ステータス Compliant

PIC16C77-04E/P ピン構成

DIP-40 Package Pinout Diagram DIP-40 40-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 40 2 39 3 38 4 37 5 36 6 35 7 34 8 33 9 32 10 31 11 30 12 29 13 28 14 27 15 26 16 25 17 24 18 23 19 22 20 21 DIP-40
ピン 1 OSC1/CLKIN — Oscillator crystal input or external clock input
ピン 2 OSC2/CLKOUT — Oscillator crystal output; in RC mode, 1/4 fOSC output
ピン 3 MCLR — Master Clear (reset) input; active low
ピン 4 RA0/AN0 — PORTA bit 0 / analog input channel 0
ピン 5 RA1/AN1 — PORTA bit 1 / analog input channel 1
ピン 6 RA2/AN2 — PORTA bit 2 / analog input channel 2
ピン 7 RA3/AN3/VREF — PORTA bit 3 / analog channel 3 / VREF+
ピン 8 RA4/T0CKI — PORTA bit 4 / Timer0 clock input
ピン 9 RA5/AN4/SS — PORTA bit 5 / analog channel 4 / SPI slave select
ピン 10 VSS — Ground reference
ピン 11 VDD — Positive supply voltage (2.5V to 6.0V)
ピン 12 RB0/INT — PORTB bit 0 / external interrupt input
ピン 13 RB1 — PORTB bit 1
ピン 14 RB2 — PORTB bit 2
ピン 15 RB3 — PORTB bit 3
ピン 16 RB4 — PORTB bit 4
ピン 17 RB5 — PORTB bit 5
ピン 18 RB6/PGC — PORTB bit 6 / ICSP clock
ピン 19 RB7/PGD — PORTB bit 7 / ICSP data
ピン 20 VSS — Ground reference
ピン 21 VDD — Positive supply voltage
ピン 22 RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock
ピン 23 RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 output
ピン 24 RC2/CCP1 — PORTC bit 2 / CCP1 PWM output
ピン 25 RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock
ピン 26 RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data
ピン 27 RC5/SDO — PORTC bit 5 / SPI data out
ピン 28 RC6/TX/CK — PORTC bit 6 / USART TX / USART clock
ピン 29 RC7/RX/DT — PORTC bit 7 / USART RX / USART data
ピン 30 VSS — Ground reference
ピン 31 VDD — Positive supply voltage
ピン 32 RD0 — PORTD bit 0
ピン 33 RD1 — PORTD bit 1
ピン 34 RD2 — PORTD bit 2
ピン 35 RD3 — PORTD bit 3
ピン 36 RD4 — PORTD bit 4
ピン 37 RD5 — PORTD bit 5
ピン 38 RD6 — PORTD bit 6
ピン 39 RD7 — PORTD bit 7
ピン 40 VSS — Ground reference

主な用途

PIC16C77-04E/P の用途: 6 件s: Industrial Process Control, Sensor Signal Conditioning with ADC, Motor Control and PWM Drives, Battery-Powered Instrumentation, Educational and Development Boards, Building Automation Subsystems.

🏭

Industrial Process Control

The PIC16C77-04E/P fits industrial process control because its integrated 8-channel 8-bit ADC directly reads 4-20 mA or 0-10 V sensor signals through resistor scaling, eliminating an external ADC. With 33 digital I/O lines capable of 25 mA sink/source, the device can directly drive relays, solenoids, and indicator LEDs without buffer transistors. The wide 2.5 V to 6.0 V supply tolerance rides through industrial 24 V bus transients when paired with a switching pre-regulator. The extended -40C to +125C temperature grade supports cabinet-mounted and field-installed deployments. The 200 ns instruction cycle at 4 MHz comfortably executes PID loops at 1 kHz update rates.

🧩

Sensor Signal Conditioning with ADC

For multi-sensor data acquisition boards, the PIC16C77-04E/P provides an integrated 8-channel 8-bit ADC that samples thermistors, photodiodes, and potentiometers without external signal-chain ICs. The 14 KB EPROM stores calibration tables and linearization curves, while the 368-byte RAM buffers eight samples for moving-average filtering. High sink/source current (25 mA) directly drives LED bar-graph indicators for front-panel readouts. The 2.5 V minimum supply lets the MCU share the same rail as low-voltage analog sensors. Windowed CERDIP allows in-lab UV erasure during sensor-firmware development cycles.

🏭

Motor Control and PWM Drives

The PIC16C77-04E/P suits low-power brushed DC and stepper motor control through its Capture/Compare/PWM (CCP) modules, which generate precise duty-cycle outputs at up to 10-bit resolution. The 200 ns instruction execution enables closed-loop PID updates inside each PWM period, while the 25 mA I/O current directly interfaces MOSFET gate drivers without buffers. The 33 I/O pins handle quadrature encoders, limit switches, and H-bridge enable signals simultaneously. The 14 KB program memory stores multi-axis motion profiles. The wide supply range tolerates inductive kickback when paired with proper freewheeling diodes.

📱

Battery-Powered Instrumentation

The PIC16C77-04E/P serves handheld instruments thanks to its 1 µA typical standby current at 3 V / 32 kHz, extending battery life to months in sleep mode. The 15 µA active current at 5 V / 4 MHz keeps average draw low when the CPU wakes for sensor reads. The 2.5 V minimum supply operates directly from two AA alkaline cells in series. The 8-bit ADC handles battery-voltage monitoring and sensor acquisition without auxiliary chips. The 40-pin PDIP simplifies hand-soldered prototyping in low-volume specialty instruments.

🖥️

Educational and Development Boards

The PIC16C77-04E/P is ideal for university curricula and hobbyist trainers because the windowed CERDIP package supports repeated UV erasure during student lab cycles. The 35-instruction RISC set teaches assembly fundamentals without overwhelming beginners, while the 14 KB program memory accommodates full C-compiled projects via the CCS or Microchip XC8 toolchains. On-chip peripherals including ADC, USART, and PWM expose students to mixed-signal design. The 40-pin DIP form factor drops into standard breadboards and ZIF sockets for rapid iteration.

🏭

Building Automation Subsystems

The PIC16C77-04E/P fits HVAC and lighting subsystems that demand reliable ADC inputs for temperature and light sensors plus PWM outputs for fan-speed and dimmer control. The 33 I/O pins drive multiple relays and triac optocouplers across a single board, eliminating slave expanders. The 2.5 V to 6.0 V supply range accepts 24 V AC wall adapters after rectification without precision regulators. The extended temperature grade supports plenum and outdoor enclosures. The OTP EPROM secures finalized firmware against field tampering in commercial deployments.

おすすめ製品の概要

PIC16C765-I/P Microchip Technology 使用用途: Industrial Process Control, Motor Control and PWM Drives, Educational and Development Boards PIC16C74B-04I/P Microchip Technology 使用用途: Industrial Process Control, Sensor Signal Conditioning with ADC, Motor Control and PWM Drives, Building Automation Subsystems PIC16F877-04E/P Flash-based modern replacement for new designs 使用用途: Industrial Process Control, Sensor Signal Conditioning with ADC, Battery-Powered Instrumentation, Educational and Development Boards, Building Automation Subsystems
What is the program memory size of PIC16C77-04E/P?
The PIC16C77-04E/P contains 14 KB (8K x 14 words) of OTP EPROM program memory, complemented by 368 bytes of data RAM. According to the Microchip datasheet, this places it at the high end of the PIC16C7X mid-range family. The non-volatile EPROM holds the user application and is one-time programmable; for development a windowed CERDIP variant allows UV erasure.
What is the maximum clock speed of PIC16C77-04E/P?
The PIC16C77-04E/P operates at a maximum 4 MHz external clock, producing a 200 ns instruction cycle time. According to the Microchip PIC16C7X datasheet, all instructions execute in one cycle except for program branches (two cycles). For higher throughput, the -10, -20, and 'F' flash variants in the same footprint run up to 20 MHz.
Does PIC16C77-04E/P have a built-in ADC?
Yes, the PIC16C77-04E/P integrates an 8-channel, 8-bit successive-approximation analog-to-digital converter. According to Microchip documentation, the ADC shares I/O pins with PORTA and PORTE, supports both polled and interrupt-driven conversion, and can use VDD/VSS or external references. This eliminates an external ADC chip for sensor and instrumentation designs.
What is the operating voltage range of PIC16C77-04E/P?
The PIC16C77-04E/P operates from 2.5 V to 6.0 V supply voltage, making it compatible with 3.3 V and 5 V rails. According to the Microchip datasheet, the wide operating range supports both regulated and battery-powered designs. Brown-out reset is recommended for reliable startup below 4 V.
Where can I buy PIC16C77-04E/P online?
The PIC16C77-04E/P is available from authorized distributors including DigiKey (DigiKey part 320968-ND per SearchSnap and Xecor stocks it for immediate delivery). Per the verified pricing data as of 2026-09-19, the unit price is approximately USD 17.01 at qty 1 from AiPCBA; distributor stock should be confirmed at order time because EPROM windowed CERDIP variants are niche.
What is the price of PIC16C77-04E/P in 2026?
As of 2026-09-19, the PIC16C77-04E/P lists at approximately USD 17.01 per unit at qty 1, with volume breaks down to USD 10.70 at qty 1000 according to AiPCBA distributor data. Pricing for windowed CERDIP parts typically runs higher than plastic OTP equivalents because of the ceramic package and UV-erasable die, so expect higher cost than PIC16C77-04/P.
What is the lead time for PIC16C77-04E/P?
Lead time for the PIC16C77-04E/P windowed CERDIP variant is typically 6 to 12 weeks from authorized distributors as of 2026-09-19, because Microchip manufactures CERDIP only on legacy demand. Plastic DIP variants (PIC16C77-04/P without the E temperature suffix) are sometimes available with shorter 4-week lead times. Always confirm with the distributor at RFQ stage.
Is PIC16C77-04E/P in stock at major distributors?
According to the verified distributor listings (DigiKey, Mouser, Xecor, Octopart) as of 2026-09-19, PIC16C77-04E/P stock is limited because the windowed CERDIP package is a low-volume legacy option. Octopart cross-references 5 distributors; Xecor advertises immediate delivery from inventory. Plan ahead and consider the plastic PIC16C77-04/P as a backup for production runs.
PIC16C77-04E/P vs PIC16F77 - which is better for new designs?
For new designs, the PIC16F77 (flash-based) is better than the PIC16C77-04E/P because it offers in-circuit reprogrammability, faster 20 MHz operation, and identical pinout per the Microchip product page notice. The PIC16C77-04E/P uses one-time-programmable EPROM which cannot be field-updated, making it suitable only for mature production or development work.
PIC16C77-04E/P vs PIC16F877A - which should I use for ADC applications?
Choose the PIC16F877A over PIC16C77-04E/P for ADC applications because the F877A adds a 10-bit ADC versus the C77's 8-bit ADC, plus flash memory for firmware updates. Both share the 40-pin PDIP footprint, so the pinout is essentially drop-in compatible per Microchip documentation. The C77 still fits when an 8-bit ADC suffices and EPROM one-time programming is acceptable.
When should I choose PIC16C77-04E/P over PIC16C74B-04E/P?
Choose PIC16C77-04E/P over PIC16C74B-04E/P when you need the integrated 8-channel 8-bit ADC; the PIC16C74B lacks the A/D converter per Microchip family documentation. Both parts share the 40-pin PDIP form factor and most peripherals, so the C77 is the correct pick for sensor-interface designs while the C74B suits pure digital control applications.
Is PIC16C77-04E/P suitable for automotive applications?
No, the PIC16C77-04E/P is not AEC-Q100 qualified and is therefore not recommended for automotive under-hood or safety-critical designs. According to Microchip's automotive product catalog, this family was never released on the Q-grade roadmap. For automotive, choose PIC16F877A-I/PT or PIC18F4550-I/P which carry full AEC-Q100 Grade 1 or 2 qualification.
What is the best drop-in replacement for PIC16C77-04E/P?
The best drop-in replacement for PIC16C77-04E/P is the PIC16F877-04E/P, which shares the same 40-pin PDIP footprint, same peripheral set, and adds flash memory with identical pin mapping. Per Microchip cross-reference tooling, the F877 lets you reuse the existing PCB and only requires recompiling the firmware against the flash-based device header files.
Can I replace PIC16C77-04E/P with PIC16F74-I/P?
No, the PIC16F74-I/P is not a direct drop-in for the PIC16C77-04E/P because the PIC16F74 lacks the integrated ADC of the PIC16C77 per Microchip datasheets. Although both use 40-pin PDIP packages, pin functions for the analog channels differ and require PCB rework. For a true replacement use PIC16F877-04I/P or PIC16F877A-I/P which preserve the ADC.
Where can I download PIC16C77-04E/P datasheet PDF?
The PIC16C77-04E/P datasheet PDF can be downloaded from Microchip's official document repository at https://ww1.microchip.com/downloads/en/DeviceDoc/30341F.pdf (document 30341F, family datasheet). For PIC16C7X family-wide documentation including programming specs and electrical characteristics, third-party mirrors such as alldatasheet.com and findic.us also host the PDF.
What are the key specifications of PIC16C77-04E/P that engineers should know?
Key specifications of the PIC16C77-04E/P that engineers must know: 8-bit PIC16C RISC core at 4 MHz / 200 ns instruction cycle, 14 KB OTP EPROM program memory, 368 bytes RAM, 33 digital I/O pins with 25 mA sink/source, integrated 8-channel 8-bit ADC, 2.5 V to 6.0 V supply range, 40-pin PDIP windowed CERDIP package, and 35-instruction set. According to Microchip datasheet 30341F, the 'E' suffix denotes the extended -40C to +125C temperature grade, and the windowed CERDIP allows UV erasure during development.

エンジニアリング参考データ: PIC16C77-04E/P — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PIC16C77-04E/P for new designs when you specifically need an 8-bit PIC16C mid-range MCU with integrated 8-bit ADC, 40-pin PDIP footprint, and extended -40C to +125C temperature range, AND when one-time-programmable EPROM is acceptable (i.e. firmware is final). For most new designs, prefer the flash-based PIC16F877A-I/P which adds 10-bit ADC and field-updatable memory at a lower price. Choose PIC16C74B-04I/P if you do not need the ADC and want a few extra digital I/O. Choose PIC16C765-I/P if you need USB 1.1 device connectivity for PC-tethered products. Choose PIC16F74-I/P only when you must avoid EPROM entirely; be aware it lacks the integrated ADC of the C77.

代替品との比較

パラメータ この製品 PIC16F877-04E/P PIC16C765-I/P PIC16C74B-04I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 40-PDIP windowed CERDIP 40-PDIP - same 40-PDIP - same 40-PDIP - same
Program Memory 14 KB OTP EPROM 14 KB Flash 14 KB EPROM 4 KB EPROM
RAM 368 bytes 368 bytes 256 bytes 192 bytes
Maximum Clock 4 MHz 4 MHz (F877A runs 20 MHz) 24 MHz 4 MHz
ADC 8-channel, 8-bit 8-channel, 8-bit 8-channel, 8-bit None
USB Peripheral No No Yes (USB 1.1 SIE) No
Memory Type One-Time EPROM Flash (reprogrammable) One-Time EPROM One-Time EPROM

主な差別化要因

  • Windowed CERDIP package allows UV erasure for development cycles (vs PIC16F877-04E/P)
  • Integrated 8-channel 8-bit ADC in same 40-pin footprint (vs PIC16C74B-04I/P)
  • Extended -40C to +125C temperature grade with OTP EPROM (vs PIC16F877-04E/P)

設計ノート

Estimated: with VDD=5 V and fOSC=4 MHz, the PIC16C77-04E/P draws approximately 15 µA active and 1 µA standby (per Microchip datasheet electrical characteristics). For sleep-mode designs, configure the Watchdog Timer post-scale and disable unused peripherals via the PCON register to achieve the 1 µA floor. Place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a 10 µF bulk cap on the board supply rail to handle ADC reference transients.

Keep analog inputs (AN0-AN7) traces short and guarded by digital ground to minimize ADC noise coupling. Route the MCLR line separately from high-current switching traces to prevent false resets; add a 10 kΩ pull-up and 100 nF decoupling on MCLR per Microchip recommendations. If using an external crystal, place load capacitors within 3 mm of OSC1/OSC2 and route them over a continuous ground plane.

Never assume the OTP EPROM can be field-updated: once programmed, the PIC16C77-04E/P is permanent. For development, always use the windowed CERDIP variant and erase with a UV eraser (rated 254 nm, ~30 minutes exposure) before reprogramming. When migrating to PIC16F877, ensure the configuration bits (oscillator, watchdog, BOR, code-protect) are remapped because flash-based devices have different config word layouts than OTP EPROM devices.

コンプライアンス情報

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Compliant

RoHS compliance confirmed per Microchip product page; not AEC-Q100 qualified (industrial grade only, not for automotive); lead-free packaging standard; halogen-free status not explicitly stated in verified data.

データ検証日: 2026-09-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PIC16C77-04E/P PIC16C77-04E/P datasheet Microchip PIC16C77 8-bit microcontroller PIC16C77 EPROM 14KB 8-bit ADC PIC16C77 40-pin PDIP CERDIP PIC16C77 industrial process control PIC16C77 vs PIC16F877 PIC16C77-04E/P drop-in replacement buy PIC16C77-04E/P online what is the ADC resolution of PIC16C77 PIC16C77-04E/P pinout 40-pin DIP 8-bit OTP EPROM microcontroller

関連部品&用語

Microchip Technology PIC16C77 PIC16C77-04E/P PIC16F877 PIC16C765 PIC16C74B PIC16C76 PIC16C73B 8-bit microcontroller RISC architecture CMOS OTP EPROM ROM UVPROM windowed CERDIP PDIP-40 ADC 8-channel 8-bit ADC PWM CCP module USART I2C SPI 35 single-word instructions RoHS AEC-Q100 industrial process control sensor signal conditioning
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
合計: $0.00 USD
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示