PIC16F1613-E/ST - 8-bit 32MHz XLP MCU 3.5KB Flash | Microchip
部品番号: PIC16F1613-E/ST ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.62 | $1.62 |
| 10 | $1.45 | $14.50 |
| 100 | $1.21 | $121.00 |
| 500 | $1.04 | $520.00 |
| 1,000 | $0.93 | $930.00 |
| 3,000 | $0.85 | $2,550.00 |
PIC16F1613-E/ST 概要
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one silicon die. The PIC16F architecture uses a RISC-based Harvard structure with a 14-bit instruction word optimized for deterministic real-time control. PIC MCUs belong to the broader microcontrollers > integrated circuits > semiconductors product hierarchy and are widely used in embedded control where low power, deterministic behavior, and small footprints are essential. The XLP (eXtreme Low Power) designation indicates sub-uA/MHz active currents and deep-sleep currents suitable for battery-powered and energy-harvesting designs.
Key features include a 10-bit Analog-to-Digital Converter (ADC) with computation, up to 8-channel input multiplexing, Capture/Compare/PWM (CCP) peripherals, a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, configurable logic cells (CLC), and a peripheral pin select (PPS) system. The device supports up to 32MHz CPU clock, a wide 2.3V to 5.5V operating voltage, and nanoWatt XLP sleep modes that drop quiescent current to the nanoampere range.
Technically, the device uses an enhanced mid-range core with hardware multiply and a 16-level hardware stack, 256 bytes of EEPROM data memory, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two MSSP peripherals (I2C/SPI), and on-chip debug support via ICD. The 14-pin TSSOP package offers a small 4.4mm body width compatible with hand-soldered prototypes and high-density boards.
Typical applications include small motor control (low-cost BLDC and brushed DC), LED lighting drivers, household appliances, IoT sensor nodes, capacitive-touch user interfaces (via mTouch), smoke detectors, and consumer white goods. The combination of 24-bit SMT, zero-cross detect, and CCP makes the PIC16F1613 particularly suited to closed-loop motor and lighting control without external timers.
When designing with this MCU, plan for decoupling caps on VDD/AVDD and follow EOC access ports for in-circuit programming. The PPS block requires careful pin remapping configuration in software; verify peripheral-to-pin mappings in Microchip's MPLAB Xpress / MCC code configurator before PCB layout sign-off. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: PIC16F1613-E/ST — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F1613-E/ST （同一形状・フットプリント） — 相違点: Package, Program Memory (Flash), ADC, Core Architecture, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16F1613-I/ST
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$0.74 / 個
データシートを見る →PIC16F1575-E/ST
✅ ドロップイン✓ 在庫あり
$1.05 / 個
データシートを見る →PIC16F1574-E/ST
✅ ドロップイン✓ 在庫あり
$0.98 / 個
データシートを見る →PIC16F1503-I/ST
✅ ドロップイン✓ 在庫あり
$0.94 / 個
データシートを見る →PIC16F1455-I/ST
✅ ドロップイン✓ 在庫あり
$1.31 / 個
データシートを見る →PIC16F1613-E/ST 最大定格＆電気的特性
| Core Architecture | PIC16 enhanced mid-range 8-bit RISC |
| Program Memory (Flash) | 3.5 KB (2K x 14 words) |
| Data EEPROM | 256 bytes |
| Data RAM | 256 bytes |
| Maximum CPU Speed | 32 MHz |
| Operating Voltage | 2.3 V to 5.5 V |
| ADC | 10-bit ADC with computation |
| ADC Channels | Up to 8 |
| Timers | 24-bit SMT, CCP, Timer0/1/2 |
| Communication | EUSART, 2x MSSP (I2C/SPI) |
| Configurable Logic Cells (CLC) | Yes |
| Zero-Cross Detection | Yes |
| Peripheral Pin Select (PPS) | Yes |
| 動作温度 | -40C to +125C (E suffix, extended industrial) |
| パッケージ | 14-pin TSSOP (ST), 4.4 mm body width |
| 実装タイプ | Surface Mount |
| MSLレベル | 1 (unlimited floor life at <30C / 85% RH) |
| RoHS ステータス | Compliant |
| XLP Sleep Current | nanoWatt XLP (sub-uA deep sleep) |
PIC16F1613-E/ST ピン構成
| ピン 1 | RA5/SOSC1/CLKIN/AN4/CWG1FLT/CLCIN3/CCP2/SDI1 — Multi-function GPIO/analog; SOSC secondary oscillator input or CCP2 |
| ピン 2 | RA4/AN3/TX/CWG1D2/CLCIN2/CCP1/PWM3/PPS — Multi-function GPIO/analog; EUSART TX or CCP1 PWM output |
| ピン 3 | RA3/AN17/MCLR/VPP — Reset/MCLR or analog input; programming high-voltage entry |
| ピン 4 | RA2/AN18/T0CKI/PPS/CWG1FLT/INT — Multi-function GPIO/analog; T0CKI timer clock or external interrupt |
| ピン 5 | RA1/AN19/PPS/INT/CWG1D1/CLCIN1 — Multi-function GPIO/analog; external interrupt or CLC input |
| ピン 6 | RA0/AN20/CWG1D0/INT/PPS — Multi-function GPIO/analog; external interrupt |
| ピン 7 | VSS — Ground reference |
| ピン 8 | RA7/CLKOUT/PPS — Multi-function GPIO; system clock output |
| ピン 9 | RA6/CLKR/PPS/INT — Multi-function GPIO |
| ピン 10 | RC0/SCL1/SCK1/AN8/PPS/CWG1FLT — Multi-function GPIO; I2C SCL1 or SPI SCK1 |
| ピン 11 | RC1/SDA1/SDI1/AN9/PPS — Multi-function GPIO; I2C SDA1 or SPI SDI1 |
| ピン 12 | RC2/AN6/PPS/CCP1/PWM2 — Multi-function GPIO; CCP1 PWM |
| ピン 13 | RC3/AN7/PPS/CCP2/PWM3/CWG1FLT — Multi-function GPIO; CCP2 PWM |
| ピン 14 | VDD — Positive supply voltage (2.3V to 5.5V) |
主な用途
PIC16F1613-E/ST の用途: 7 件s: Small Motor Control (BLDC / Brushed DC), LED Lighting Drivers and Dimming, Capacitive Touch (mTouch) User Interfaces, Household Appliance Control, IoT Edge Sensor Nodes, Smoke and Fire Detector Front-Ends, Consumer White Goods (Fans, Purifiers, Small Pumps).
Small Motor Control (BLDC / Brushed DC)
The PIC16F1613-E/ST is purpose-built for low-cost brushless DC and brushed DC motor control, integrating a 24-bit Signal Measurement Timer, CCP modules, and Zero-Cross Detection in a single 14-pin TSSOP. The 24-bit SMT measures motor back-EMF period with sub-microsecond resolution for sensorless commutation. Zero-Cross Detect synchronizes triac-driven loads to the AC mains, reducing EMI and switching stress. With 32MHz CPU and 3.5KB Flash, the part runs vector-control or trapezoidal commutation algorithms while leaving headroom for a UART debug interface. Industrial 2.3V-5.5V operation allows direct connection to 3.3V or 5V gate drivers.
おすすめ
LED Lighting Drivers and Dimming
For mains-dimmable LED lamps and architectural lighting, the PIC16F1613-E/ST provides Zero-Cross Detection for synchronous phase-control dimming and CLC blocks for digital filtering of TRIAC chatter without external components. The 10-bit ADC with computation measures LED current via a sense resistor and modulates PWM duty on the CCP output. XLP nanoWatt sleep mode drops standby consumption below 100nA, helping meet ENERGY STAR and EU Ecodesign standby limits. The 14-pin TSSOP is small enough to fit inside E12 lamp form factors.
おすすめ
Capacitive Touch (mTouch) User Interfaces
The PIC16F1613-E/ST implements Microchip's mTouch capacitive touch sensing using the on-chip 10-bit ADC with computation (CVD mode) and dedicated CLC logic cells. Up to 8 analog-capable pins in the TSSOP-14 package support multi-button sliders and wheel interfaces without external sense capacitors. The 24-bit SMT handles long-timebase button-press and gesture timing. The XLP sleep current keeps battery-powered touch remotes alive for years on a single coin cell. Microchip's mTouch library and MCC code configurator auto-generate the CVD firmware layer.
おすすめ
Household Appliance Control
Coffee makers, washing machines, induction cooktops, and microwave ovens all benefit from the PIC16F1613-E/ST's combination of 24-bit SMT for precise timer functions, Zero-Cross Detect for triac switching, and EUSART/MSSP for HMI board communication. The -40C to +125C extended temperature range handles under-hood and kitchen-oven environments. 256 bytes of EEPROM store user preferences and calibration constants across power cycles without external memory ICs.
おすすめ
IoT Edge Sensor Nodes
Battery-powered wireless sensor nodes use the PIC16F1613-E/ST as the host MCU for sensor I/O, timing, and protocol handling before forwarding data to a sub-GHz or BLE radio. The nanoWatt XLP sleep mode drops quiescent current below 1uA, enabling multi-year battery life on a 2xAA pack. The 10-bit ADC reads temperature, humidity, and battery voltage; the EUSART interfaces to popular modules like RN2483 (LoRa) or RN4870 (BLE). PPS allows flexible pin assignment for antenna-switch control without board rework.
おすすめ
Smoke and Fire Detector Front-Ends
Smoke detectors and CO sensor front-ends rely on the PIC16F1613-E/ST for low-power analog monitoring and alarm-tone generation. The 24-bit SMT drives a precision PWM horn pattern, the ADC reads photoelectric smoke chamber current, and XLP sleep extends the 10-year battery life required by UL 217. The -40C to +125C rating covers garage-attic installation environments. Internal EEPROM logs the last-test timestamp and battery self-test result.
おすすめ
Consumer White Goods (Fans, Purifiers, Small Pumps)
Tower fans, air purifiers, and small pump controllers use the PIC16F1613-E/ST to drive BLDC or brushed motors via onboard CCP and Zero-Cross blocks. The Peripheral Pin Select (PPS) system lets designers reroute UART, PWM, and INT pins without respinning the PCB, accelerating development. The TSSOP-14 footprint is small enough for hand-held appliances, while the industrial temp range handles kitchen heat. CCP and EUSART interfaces support LED ring indicators and Bluetooth remote control.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F1613-E/ST — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F1613-I/ST | PIC16F1575-E/ST | PIC16F1574-E/ST | PIC16F1503-I/ST | PIC16F1455-I/ST |
|---|---|---|---|---|---|---|
| Package | 14-pin TSSOP (ST) | 14-pin TSSOP (ST) - same | 14-pin TSSOP (ST) - same | 14-pin TSSOP (ST) - same | 14-pin TSSOP (ST) - same | 14-pin TSSOP (ST) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 3.5 KB | 3.5 KB | 7 KB | 7 KB | 5.5 KB | 14 KB |
| RAM | 256 bytes | 256 bytes | 512 bytes | 512 bytes | 384 bytes | 1024 bytes |
| 24-bit SMT | Yes | Yes | No | No | No | No |
| CLC / Zero-Cross Detect | Yes | Yes | No | No | No | No |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 20 MHz | 48 MHz |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Temperature Range | -40C to +125C (E suffix) | 0C to +70C (I suffix) | -40C to +125C (E suffix) | -40C to +125C (E suffix) | 0C to +70C (I suffix) | 0C to +70C (I suffix) |
| Estimated Unit Price (qty 1) | $1.62 | $1.45 | $1.70 | $1.60 | $1.30 | $1.85 |
主な差別化要因
- Integrated 24-bit SMT and Zero-Cross Detect for motor and lighting （vs PIC16F1574-E/ST)
- Configurable Logic Cells (CLC) for hardware glue logic （vs PIC16F1455-I/ST)
- PPS allows pin remapping without PCB re-spin （vs PIC16F1503-I/ST)
設計ノート
Place a 100nF decoupling capacitor as close as possible to the VDD pin (pin 14) and a bulk 10uF tantalum/ceramic on the same node. Use a separate AVSS/AGND connection tied back to VSS at one point (star-ground) if ADC accuracy matters. The XLP nanoWatt sleep mode requires VDD to remain stable; verify any reset/brownout circuit (BOR) is enabled in configuration bits for battery-powered designs to avoid lock-up at low VDD.
Route the ICSP clock/data lines (ICSPCLK/ICSPDAT) to a single-row programming header accessible from the board edge. Keep the MCLR/RA3 line short and add the standard 10k pull-up to VDD - the ICSP programmer relies on this. For AC line-sensing designs, place the zero-cross network (resistor bridge + opto-isolator) close to the Zero-Cross Detect pin to minimize noise pickup that could mis-fire the triac.
Peripheral Pin Select (PPS) assignments are locked per-pin at runtime - if your code reassigns a PPS output to a new pin, the old pin will revert to GPIO. Always explicitly unlock PPS (PPSLOCK = 0x55, 0xAA), make the assignment, then re-lock. Forgetting the unlock sequence silently fails PPS writes and leaves peripherals on wrong pins, causing confusing board bring-up issues.
For capacitive-touch (mTouch) CVD layouts, route the sense traces with a small ground-hatched pour separated by 0.5mm to reduce stray capacitance to ground. Keep touch traces short (<50mm) and avoid running them parallel to noisy digital lines. Add a 100pF-to-1nF series resistor close to the ADC pin to limit inrush current that can trip ESD clamps.
コンプライアンス情報
RoHS and REACH compliance per Microchip material declaration. Industrial -E temperature grade, not AEC-Q100 qualified (use PIC16F1613-E/ST - automotive versions are different MPNs). Lead-free reflow-compatible to 260C peak.
