PIC16F18325-I/P - 8-Bit MCU, 14KB Flash, 32MHz | Microchip
部品番号: PIC16F18325-I/P ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.83 | $1.83 |
| 10 | $1.65 | $16.50 |
| 100 | $1.42 | $142.00 |
| 500 | $1.25 | $625.00 |
| 1,000 | $1.1 | $1,100.00 |
PIC16F18325-I/P 概要
An 8-bit microcontroller (MCU) is a single-chip computer that integrates an 8-bit CPU core, program memory (Flash), data memory (RAM), non-volatile EEPROM, and a set of peripherals such as timers, ADC, and communication interfaces. PIC16F MCUs sit at the entry-level of Microchip's PIC16 enhanced mid-range family and are widely used as glue logic and control processors in industrial, IoT, and consumer applications. They sit at the bottom of the hierarchy: PIC16F18325 -> PIC16F family -> PIC microcontroller -> microcontroller -> embedded IC -> semiconductor.
Key features include Extreme Low Power (XLP) technology for battery-driven designs, Peripheral Pin Select (PPS) for flexible I/O mapping, Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG), and Zero-Cross Detect. The device supports both 3V and 5V operation and is functional-safety ready.
The architecture uses an enhanced mid-range 8-bit CPU core with 49 instructions, a 16-level hardware stack, and interrupt capability with automatic context saving. Internal oscillator options and flexible clocking simplify BOM by eliminating external crystals in many designs.
Typical applications include low-power IoT sensor nodes, battery-powered home automation, automotive interior body modules, industrial control boards, and consumer white goods. The XLP features suit remote controls, energy harvesting, and wearables.
When designing with this MCU, ensure the configuration words are correctly programmed for the chosen oscillator and watchdog. PPS remapping must be configured before enabling peripherals. Decoupling capacitors of 100nF should be placed close to VDD.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone manufacturer datasheet, helping engineers compare parts side-by-side.
ドロップイン代替品: PIC16F18325-I/P — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16F18325-I/P （同一形状・フットプリント） — 相違点: Package, ADC, I/O Pins, Program Memory (Flash), DAC.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16F18325-E/P
✅ ドロップイン✓ 在庫あり
$1.05 / 個
データシートを見る →PIC16F18325-I/SL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16F18324-I/P
✅ ドロップイン✓ 在庫あり
$0.92 / 個
データシートを見る →PIC16F18313-I/P
✅ ドロップイン✓ 在庫あり
$0.79 / 個
データシートを見る →PIC16F1825-I/P
✅ ドロップイン✓ 在庫あり
$1.23 / 個
データシートを見る →PIC16F1829-I/P
✅ ドロップイン✓ 在庫あり
$1.25 / 個
データシートを見る →PIC16F1827-I/P
✅ ドロップイン✓ 在庫あり
$1.24 / 個
データシートを見る →PIC16F18325-I/P 最大定格＆電気的特性
| Core Architecture | PIC enhanced mid-range 8-bit |
| Program Memory (Flash) | 14 KB (8K x 14) |
| Data RAM | 1 KB |
| EEPROM | 256 B |
| Maximum CPU Frequency | 32 MHz |
| Instruction Set | 49 instructions |
| DAC | 5-bit |
| PWM | 10-bit |
| Communication Interfaces | EUSART, SPI, I2C |
| 動作温度範囲 | -40C to +85C (industrial) |
| パッケージ | 14-pin PDIP |
| 実装タイプ | Through-Hole |
| RoHS ステータス | Compliant |
| Functional Safety | FuSa ready |
PIC16F18325-I/P ピン構成
| ピン 1 | VDD — Positive supply voltage |
| ピン 2 | RA5 — I/O port A bit 5 |
| ピン 3 | RA4 — I/O port A bit 4 |
| ピン 4 | RA3/MCLR — I/O port A bit 3 / Master Clear (reset) |
| ピン 5 | RA2 — I/O port A bit 2 (T0CKI) |
| ピン 6 | RA1 — I/O port A bit 1 (ICSPCLK) |
| ピン 7 | RA0 — I/O port A bit 0 (ICSPDAT) |
| ピン 8 | VSS — Ground reference |
| ピン 9 | RC0 — I/O port C bit 0 |
| ピン 10 | RC1 — I/O port C bit 1 |
| ピン 11 | RC2 — I/O port C bit 2 |
| ピン 12 | RC3 — I/O port C bit 3 |
| ピン 13 | RC4 — I/O port C bit 4 |
| ピン 14 | RC5 — I/O port C bit 5 |
主な用途
PIC16F18325-I/P の用途: 6 件s: Low-Power IoT Sensor Node, Battery-Powered Home Automation, Industrial Control Board, Automotive Interior Body Module, Consumer White Goods, Remote Control and IR Toy.
Low-Power IoT Sensor Node
The PIC16F18325-I/P suits battery-powered IoT sensor nodes because of its Extreme Low Power (XLP) technology with sleep currents in the microamp range. Its 32MHz CPU and 14KB Flash handle sensor reading, basic edge processing, and BLE/UART comms with the host gateway. The integrated 10-bit ADC captures analog sensor data directly, while the 5-bit DAC drives reference outputs. At 3V operation with most time spent in sleep, a coin cell can power the node for years. The 14-pin PDIP package simplifies breadboard prototyping before SMD migration.
おすすめ
Battery-Powered Home Automation
For wireless remotes, door sensors, and smart-home battery nodes, the PIC16F18325-I/P's XLP technology and PPS flexibility are decisive. The 14KB Flash fits Zigbee/BLE stack libraries plus application code. The CLC and NCO peripherals implement custom signal generation and logic without CPU overhead, lowering average current draw. Industrial -40C to +85C operation handles garage and outdoor environments. The 256B EEPROM stores user settings and pairing data without external memory. Compatible with CR2032 coin cells for multi-year battery life.
おすすめ
Industrial Control Board
The PIC16F18325-I/P is widely used in industrial PLCs, sensor interfaces, and small control boards. The 10-bit ADC, comparators, and PWM peripherals handle closed-loop control of motors, valves, and heaters. The EUSART, SPI, and I2C interfaces connect to industrial sensor buses, displays, and other MCUs. The 32MHz clock and 14KB Flash support Modbus RTU slave stacks and PID control firmware. Industrial temperature range, through-hole PDIP, and functional-safety readiness make it a strong fit for factory floor equipment requiring easy field servicing.
おすすめ
Automotive Interior Body Module
The PIC16F18325-I/P powers interior accessories such as ambient lighting controllers, seat-position memories, and mirror-adjust modules. The CWG peripheral generates complementary PWM signals for LED drivers and H-bridges. The 5-bit DAC sets reference voltages for analog dimming. Although the -I grade is not AEC-Q100, it operates reliably in cabin environments and supports functional-safety design flows. The 14-pin PDIP eases prototype rework, and migration to automotive-grade variants in QFN is straightforward. PPS simplifies PCB routing.
おすすめ
Consumer White Goods
In washing machines, refrigerators, microwave ovens, and air conditioners, the PIC16F18325-I/P serves as the main user-interface and motor-control co-processor. The integrated 10-bit ADC reads temperature, humidity, and weight sensors. The PWM and CWG peripherals drive triacs for heater elements and brushless DC motors. The Flash-based memory allows last-minute firmware customization for regional SKUs without external EEPROM. The 14-pin PDIP fits service-replacement workflows in field returns. The wide 2.3V-5.5V supply tolerates unregulated 5V rails.
おすすめ
Remote Control and IR Toy
The PIC16F18325-I/P's XLP features suit battery-powered IR remote controls, learning toys, and consumer handheld devices. Sleep currents in the nanoamp range extend battery life to multi-year durations. The CWG peripheral generates accurate IR carrier frequencies (36-40kHz typical) without CPU overhead. The 14KB Flash holds protocol libraries (NEC, RC5, RC6) plus user customization. The PDIP package simplifies hand-solder repairs for hobby and replacement markets. Internal oscillator eliminates external crystals, reducing BOM cost.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16F18325-I/P — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16F18325-E/P | PIC16F18324-I/P | PIC16F1825-I/P | PIC16F1829-I/P |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP | 14-pin PDIP |
| Flash Memory | 14 KB | 14 KB | 7 KB | 14 KB | 14 KB |
| RAM | 1 KB | 1 KB | 512 B | 1 KB | 1 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Temperature Range | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| CIPs (CLC/NCO/CWG) | Yes | Yes | Yes | No (previous-gen) | No (LIN-enabled) |
主な差別化要因
- Core Independent Peripherals (CIPs) integrated （vs PIC16F1825-I/P)
- Higher Flash and RAM density （vs PIC16F18324-I/P)
- Peripheral Pin Select (PPS) for flexible routing （vs PIC16F1829-I/P)
設計ノート
The PIC16F18325-I/P supports operating voltages from 2.3V to 5.5V per the Microchip datasheet (40001795E). Decouple VDD with a 100nF ceramic capacitor placed within 2-3mm of the VDD pin, and add a bulk 10uF capacitor near the supply rail. Enable the Brown-Out Reset (BOR) via configuration words to protect against low-voltage corruption during Flash programming.
Route the ICSP clock or ICSP data signals (RA1 and RA0 by default) away from high-current switching traces to avoid programming glitches. Place the MCLR pull-up (typically 10k ohm) close to pin 4. For PPS designs, document the pin mapping in code comments to ease rework when changing packages.
Do not forget to configure unused I/O pins as outputs and tied low, or set them as inputs with the WPU disabled, to minimize sleep current. When migrating from PIC16F1825-I/P, the PPS module requires explicit unlocking sequence (PPSLOCK bit) before remapping. Configuration words must be set correctly before code can execute; verify them in MPLAB X.
Estimated: At maximum CPU activity (32 MHz, 5V, all peripherals active), the PIC16F18325-I/P draws approximately 6-8 mA, dissipating 30-40 mW. The PDIP-14 package has adequate thermal dissipation for normal operation; no heatsink is needed. In sleep mode with XLP, total current drops to under 1 uA per datasheet.
コンプライアンス情報
RoHS compliant per Microchip product page. Industrial temperature grade; not AEC-Q100 qualified. For automotive-grade AEC-Q100 variants, contact Microchip directly. Functional Safety (FuSa) ready per Microchip documentation.
