PIC16LF819T-I/ML - 8-bit MCU, 3.5KB Flash, 10MHz, 28-QFN
部品番号: PIC16LF819T-I/ML ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.2 | $4.20 |
| 10 | $3.78 | $37.80 |
| 100 | $3.36 | $336.00 |
| 500 | $3 | $1,500.00 |
| 1,000 | $2.71 | $2,710.00 |
| 3,000 | $2.44 | $7,320.00 |
PIC16LF819T-I/ML 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), working memory (RAM), and programmable I/O peripherals into a single IC. The PIC16LF819 belongs to the broader PIC16 architecture family, which scales down to low-pin-count, low-power midrange devices and scales up toward enhanced PIC18 and PIC24 families. PIC MCUs use a RISC-based Harvard architecture with 35 single-word instructions, providing deterministic timing and ease of use for embedded developers.
Key features include 16 I/O pins, an integrated 10-bit ADC, an internal oscillator, and support for I2C and SPI communication peripherals. The device also offers an enhanced capture/compare/PWM module (ECCP), multiple timers, and nanoWatt power management with brown-out detect and ultra-low-power sleep modes for battery applications.
At the silicon level, the PIC16LF819 uses Microchip's CMOS Flash process technology with nanowatt-grade leakage control, allowing supply currents in the microamp range during sleep. The Flash program memory supports in-system serial programming (ICSP) and self-programming for field upgrades, while the 256-byte SRAM provides buffer storage for interrupt-driven control loops.
Typical applications include low-power sensor nodes, battery chargers, consumer appliances, industrial control panels, and handheld instrumentation. The wide 1.8V-3.6V range and integrated peripherals make it a frequent choice for compact embedded designs that need reliable performance and long-term supply.
When designing with this MCU, ensure decoupling capacitors (100nF plus 10uF bulk) are placed within 5mm of VDD, route the ICSP clock/data lines close together to avoid programming noise, and verify the unique ID match if anti-rollback is required. Compared with switching the system clock to a faster part, scaling software timing within the MCU's 35-instruction set is often the lowest-risk optimization path.
This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes that augment the Microchip datasheet for engineers selecting or replacing this device.
ドロップイン代替品: PIC16LF819T-I/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC16LF819T-I/ML （同一形状・フットプリント） — 相違点: Core Architecture, Package, ADC, Operating Temperature, Family.
クイック比較ツール — 並列比較する代替部品を選択:
PIC16LF819-I/MLTSL
✅ ドロップイン✓ 在庫あり
$1.89 / 個
データシートを見る →PIC16LF819-I/MLTSL
✅ ドロップイン✓ 在庫あり
$1.89 / 個
データシートを見る →PIC16LF818T-I/ML
✅ ドロップイン✓ 在庫あり
$1.92 / 個
データシートを見る →PIC16LF819T-I/MLTSL
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC16LF818-I/ML
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.28 / 個
データシートを見る →PIC16LF819T-I/ML 最大定格＆電気的特性
| Core Architecture | PIC 8-bit RISC |
| Program Memory Type | Flash |
| Program Memory Size | 3.5 KB (2K x 14 words) |
| RAM Size | 256 bytes |
| Data EEPROM | 256 bytes |
| Maximum CPU Clock | 20 MHz (10 MHz instruction rate) |
| Instruction Execution Time | 200 ns |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| Number of I/O Pins | 16 |
| Package Type | 28-pin QFN (6 x 6 mm) with exposed pad |
| 実装スタイル | Surface Mount |
| 動作温度 | -40 C to +85 C (Industrial) |
| Peripherals | ADC, ECCP, I2C, SPI, Timers |
| ADC | 10-bit, multiple channels |
| Lifecycle Stage | ACTIVE |
| RoHS ステータス | Compliant |
PIC16LF819T-I/ML ピン構成
| ピン 1 | RA2/AN2/CVref — PORTA bit 2, analog input 2, comparator reference |
| ピン 2 | RA3/AN3/Vref+ — PORTA bit 3, analog input 3, ADC Vref+ |
| ピン 3 | RA4/AN4/T0CKI — PORTA bit 4, analog input 4, Timer0 clock input |
| ピン 4 | RA5/AN5/SS — PORTA bit 5, analog input 5, SPI slave select |
| ピン 5 | VSS — Ground reference |
| ピン 6 | RA7/OSC1/CLKIN — PORTA bit 7, oscillator input, external clock input |
| ピン 7 | RA6/OSC2/CLKOUT — PORTA bit 6, oscillator output, clock output |
| ピン 8 | RB0/INT — PORTB bit 0, external interrupt input |
| ピン 9 | RB1/SDI/SDA — PORTB bit 1, SPI data in or I2C data |
| ピン 10 | RB2/SDO — PORTB bit 2, SPI data out |
| ピン 11 | RB3/SCK/SCL — PORTB bit 3, SPI clock or I2C clock |
| ピン 12 | RB4 — PORTB bit 4 |
| ピン 13 | RB5/PGM — PORTB bit 5, low-voltage programming |
| ピン 14 | RB6/PGC — PORTB bit 6, ICSP clock |
| ピン 15 | RB7/PGD — PORTB bit 7, ICSP data |
| ピン 16 | VDD — Positive supply voltage (1.8V to 3.6V) |
| ピン 17 | RC0 — PORTC bit 0 |
| ピン 18 | RC1 — PORTC bit 1 |
| ピン 19 | RC2/CCP1 — PORTC bit 2, capture/compare/PWM output 1 |
| ピン 20 | RC3 — PORTC bit 3 |
| ピン 21 | RC4 — PORTC bit 4 |
| ピン 22 | RC5 — PORTC bit 5 |
| ピン 23 | RC6 — PORTC bit 6 |
| ピン 24 | RC7 — PORTC bit 7 |
| ピン 25 | RE3/MCLR/VPP — PORTE bit 3, master clear reset, programming voltage |
| ピン 26 | RA0/AN0 — PORTA bit 0, analog input 0 |
| ピン 27 | RA1/AN1 — PORTA bit 1, analog input 1 |
| ピン 28 | VSS — Ground reference (also exposed pad tie) |
主な用途
PIC16LF819T-I/ML の用途: 6 件s: Battery-Powered IoT Sensor Node, Consumer Remote Control / Handheld Device, Industrial Sensor Transmitter, Automatic Battery Charger Controller, Appliance Front-Panel Controller, Education and Hobbyist Embedded Development.
Battery-Powered IoT Sensor Node
The PIC16LF819T-I/ML is a strong fit for battery-powered wireless sensor nodes because it operates from 1.8 V to 3.6 V and supports nanoWatt sleep modes drawing microamp quiescent current. Its 10-bit ADC reads analog sensors while the MSSP block drives I2C or SPI to a low-power radio such as the MRF24J40 or LoRa SX1276. With 256 bytes of SRAM and 3.5 KB Flash, firmware fits even with a simple RTOS-equivalent scheduler, and the 28-QFN 6x6 mm package keeps PCB area minimal for coin-cell enclosures.
おすすめ
Consumer Remote Control / Handheld Device
The PIC16LF819T-I/ML suits consumer handheld devices like TV remotes, IR learners, and small appliance controllers that need 16 I/O pins to drive key-scan matrices, IR LEDs, and status indicators. Running at 10 MHz with 200 ns instruction execution, the MCU can scan 4x4 keypads in microseconds while keeping CPU idle in sleep between button presses. The 256-byte RAM comfortably holds system state and IR protocol buffers, and the 28-QFN package is small enough to fit inside slim remote housings.
おすすめ
Industrial Sensor Transmitter
The PIC16LF819T-I/ML fits industrial sensor transmitters where -40 C to +85 C industrial temperature grade, ECCP PWM, and a 10-bit ADC are needed in a small surface-mount footprint. The 10-bit ADC digitizes 4-20 mA loop or 0-10 V analog inputs, while I2C multiplexes a digital temperature sensor or EEPROM. The 28-QFN 6x6 mm with exposed pad helps thermal dissipation for sustained operation in sealed enclosures, and the 1.8-3.6 V range supports 24 V loop-powered architectures with regulator front-ends.
おすすめ
Automatic Battery Charger Controller
The PIC16LF819T-I/ML is appropriate for low-power battery chargers of Li-ion, NiMH, or lead-acid cells where its 10-bit ADC monitors voltage and current while the ECCP module drives a switching MOSFET or linear regulator pass element. The Flash firmware lets designers implement CC/CV charge profiles, temperature-qualified charging, and indicator LED control from a single chip. The 1.8-3.6 V supply is wide enough to operate directly from a single Li-ion cell during the charge cycle, simplifying the analog front-end.
おすすめ
Appliance Front-Panel Controller
The PIC16LF819T-I/ML drives front panels of white goods such as washing machines, microwaves, or HVAC thermostats where its 16 I/O pins handle key-scan, seven-segment or LED multiplex, and relay-driver enable lines. The integrated timers and PWM simplify triac phase-angle or zero-cross control for AC loads, while the I2C peripheral manages a real-time clock or EEPROM. Operating from 1.8-3.6 V, the MCU pairs cleanly with 3.3 V bias rails common in modern appliance designs.
おすすめ
Education and Hobbyist Embedded Development
The PIC16LF819T-I/ML is widely used in low-cost educational kits and hobbyist boards because the 35-instruction PIC16 RISC architecture is approachable for beginners while still exposing real peripherals like 10-bit ADC, I2C, SPI, and PWM. Programming via ICSP using a PICkit 3 or PICkit 4 debugs in-circuit, supporting easy lab exercises in timer-driven blinking, ADC reading, and serial protocols. The 28-QFN footprint is compact, encouraging PCB design practice with a real-world industry-grade package while 3.5 KB Flash fits most student projects.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC16LF819T-I/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC16LF819-I/ML | PIC16LF819-I/MLTSL | PIC16LF819T-I/MLTSL | PIC16LF818T-I/ML | PIC16LF818-I/ML |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | QFN-28 (6x6 mm) | QFN-28 (6x6 mm) - same | QFN-28 (6x6 mm) - same | QFN-28 (6x6 mm) - same | QFN-28 (6x6 mm) - same | QFN-28 (6x6 mm) - same |
| Program Memory (Flash) | 3.5 KB | 3.5 KB (same) | 3.5 KB (same) | 3.5 KB (same) | 1.5 KB (-57%) | 1.5 KB (-57%) |
| RAM | 256 bytes | 256 bytes (same) | 256 bytes (same) | 256 bytes (same) | 128 bytes (-50%) | 128 bytes (-50%) |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum Clock | 20 MHz / 10 MHz instruction | 20 MHz / 10 MHz instruction | 20 MHz / 10 MHz instruction | 20 MHz / 10 MHz instruction | 20 MHz / 10 MHz instruction | 20 MHz / 10 MHz instruction |
| Number of I/O Pins | 16 | 16 | 16 | 16 | 16 | 16 |
| ADC | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
主な差別化要因
- Low-voltage 1.8 V to 3.6 V operation with the smallest 28-QFN footprint （vs PIC16F876A)
- Drop-in 100% parametric match with tube-package PIC16LF819-I/ML （vs PIC16LF819-I/ML)
- More Flash memory than the lower-cost PIC16LF818T-I/ML （vs PIC16LF818T-I/ML)
設計ノート
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 16) and a 10 uF bulk capacitor on the same net, sized for the use-case ripple. Brown-out detection must be enabled for battery-powered designs to prevent Flash corruption during VDD brownout; configure BOR in the configuration word to a trip voltage at or below the minimum VDD for your application per datasheet Section 4.
The 28-QFN (6x6 mm) package has an exposed thermal pad that must be soldered to a properly sized PCB thermal land, ideally tied to VSS via at least four thermal vias. Keep ICSP signal traces (PGC/PGD on RB6/RB7) within 100 mm of the programming connector, and avoid routing them parallel to switching signals to minimize in-circuit programming noise during debug.
The MSSP peripheral drives both I2C and SPI from pins RB1/SDI/SDA, RB2/SDO, RB3/SCK/SCL, and RA5/SS. Place 4.7 kohm pull-ups on SDA and SCL for I2C, route clock and data traces together with a ground reference, and keep the total bus capacitance below 400 pF to stay within standard-mode timing. For noise-prone environments, place a small ferrite bead or RC snubber near the connector.
Do not exceed the absolute maximum VDD of 3.6 V on the LF variant; if your design starts at 5 V use PIC16F819 instead. LVP (low-voltage programming) configuration word bit selection is critical - ensure LVP is disabled unless your toolchain explicitly enables it, otherwise pin RB5 may interfere with end-application use. Finally, configure unused I/O pins as outputs low to minimize power consumption.
コンプライアンス情報
RoHS compliant per Microchip product page. AEC-Q100 not applicable for standard industrial-grade part. Lead-free packaging is standard. Halogen-free status not explicitly stated in the retrieved data.
