PIC17C42AT-25E/PT - 4KB OTP 8-bit MCU, 25MHz, 44-TQFP | Microchip
部品番号: PIC17C42AT-25E/PT ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.2 | $5.20 |
| 10 | $4.65 | $46.50 |
| 100 | $4.1 | $410.00 |
| 500 | $3.65 | $1,825.00 |
| 1,000 | $3.25 | $3,250.00 |
PIC17C42AT-25E/PT 概要
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that integrates a CPU, program memory (ROM/EPROM/OTP/Flash), data RAM, and peripheral I/O on one die. The PIC17C family sits above the PIC16C in Microchip's hierarchy, providing a 16-bit instruction word versus 14-bit, more I/O, and a wider address space, while remaining in the 8-bit RISC category: MCU -> 8-bit MCU -> RISC MCU -> PIC architecture -> PIC17C. The PIC17C42A variant added enhancements over the original PIC17C42 including improved electrical specifications and packaging options.
Key features of the PIC17C42AT-25E/PT include 4KB of OTP program memory for one-time factory or field programming, 232 x 8 general-purpose RAM for data storage, 33 I/O pins supporting peripheral functions such as timers, USART, and external interrupts, and an external oscillator interface accepting crystal or clock inputs up to 25 MHz. The device supports programmable code protection and operates across the standard commercial and industrial temperature ranges typical of the PIC17C4X family, with wide operating voltage compatibility. The 'T' designator indicates Tape and Reel packaging, and the 'E' indicates the Enhanced operating temperature range designation per Microchip's PIC17C4X nomenclature.
Architecturally, the PIC17C42A uses a Harvard architecture with separate program and data buses, a 16-bit-wide program memory bus for single-cycle instruction fetches, and a RISC instruction set with 58 instructions. Hardware peripherals include multiple timer/counters, a USART, capture/compare/PWM modules, and a watchdog timer, all configured through Special Function Registers (SFRs). The 25 MHz external clock input drives a four-phase internal oscillator that produces a 1.6 us instruction cycle.
Typical applications for the PIC17C42AT-25E/PT include industrial control systems, motor control, instrumentation, peripheral controllers, and embedded control subsystems that need more code space and I/O than a PIC16C can provide. The combination of 4KB OTP and 33 I/O makes it suitable for factory- or field-programmed controllers in moderate-volume designs.
When designing with this part, note that OTP memory is one-time-programmable and cannot be erased. For prototypes or low-volume development, a windowed CERDIP PIC17C42A part or a Flash-based PIC18 alternative may be more practical. Always verify supply chain availability through franchised distributors because OTP PIC17C4X stock is limited.
This page synthesizes distributor pricing, drop-in same-package alternatives, lifecycle notes, and design considerations that complement the Microchip datasheet to help engineers verify supply, evaluate replacements, and plan around the legacy PIC17C4X family's OTP architecture.
ドロップイン代替品: PIC17C42AT-25E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC17C42AT-25E/PT （同一形状・フットプリント） — 相違点: Package, Core Architecture, Program Memory Type, Maximum Clock Frequency, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
PIC17C42AT-25/PT
✅ ドロップイン✓ 在庫あり
$10.5 / 個
データシートを見る →PIC17C42A-25/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.55 / 個
データシートを見る →PIC17C42A-33I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC17C42A-33/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$9.65 / 個
データシートを見る →PIC17C42A-25E/P
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.6 / 個
データシートを見る →PIC17C42A-16/P
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$7.45 / 個
データシートを見る →PIC17C42AT-25E/PT 最大定格＆電気的特性
| Product Family | PIC17C4X |
| Core Architecture | 8-bit RISC (Harvard, 16-bit instruction word) |
| Program Memory Type | OTP ROM |
| Program Memory Size | 4 KB (2K x 16) |
| RAM Size | 232 x 8 bytes |
| Number of I/O Pins | 33 |
| 最大クロック周波数 | 25 MHz |
| Oscillator Type | External |
| Instruction Set | 58 instructions (16-bit instruction word) |
| パッケージ | 44-TQFP (PT) |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Series | PIC17C42A |
| 動作温度 | -40C to +125C (Enhanced range, E suffix) |
| Peripherals | Timers, USART, CCP, WDT, code protection |
PIC17C42AT-25E/PT ピン構成
| ピン 1 | OSC1/CLKIN — External clock input / crystal connection (Oscillator input) |
| ピン 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| ピン 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| ピン 4 | RA2/AN2 — PORTA bit 2 / analog input 2 |
| ピン 5 | RA3/AN3/VREF — PORTA bit 3 / analog input 3 / voltage reference |
| ピン 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| ピン 7 | RA5/SS — PORTA bit 5 / SPI slave select |
| ピン 8 | RB0/INT — PORTB bit 0 / external interrupt |
| ピン 9 | RB1 — PORTB bit 1 |
| ピン 10 | RB2 — PORTB bit 2 |
| ピン 11 | RB3 — PORTB bit 3 |
| ピン 12 | RB4 — PORTB bit 4 |
| ピン 13 | RB5 — PORTB bit 5 |
| ピン 14 | RB6 — PORTB bit 6 |
| ピン 15 | RB7 — PORTB bit 7 |
| ピン 16 | RC0 — PORTC bit 0 |
| ピン 17 | RC1 — PORTC bit 1 |
| ピン 18 | RC2/CCP1 — PORTC bit 2 / Capture-Compare-PWM 1 |
| ピン 19 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| ピン 20 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| ピン 21 | RC5/SDO — PORTC bit 5 / SPI data out |
| ピン 22 | RC6/TX/CK — PORTC bit 6 / USART transmit / clock |
| ピン 23 | RC7/RX/DT — PORTC bit 7 / USART receive / data |
| ピン 24 | RD0 — PORTD bit 0 |
| ピン 25 | RD1 — PORTD bit 1 |
| ピン 26 | RD2 — PORTD bit 2 |
| ピン 27 | RD3 — PORTD bit 3 |
| ピン 28 | RD4 — PORTD bit 4 |
| ピン 29 | RD5 — PORTD bit 5 |
| ピン 30 | RD6 — PORTD bit 6 |
| ピン 31 | RD7 — PORTD bit 7 |
| ピン 32 | RE0/RD — PORTE bit 0 / parallel slave read |
| ピン 33 | RE1/WR — PORTE bit 1 / parallel slave write |
| ピン 34 | RE2/CS — PORTE bit 2 / parallel slave chip select |
| ピン 35 | RE3 — PORTE bit 3 |
| ピン 36 | OSC2/CLKOUT — Oscillator output / clock out |
| ピン 37 | MCLR/VPP — Master clear reset / programming voltage |
| ピン 38 | NC — Not connected (reserved) |
| ピン 39 | VDD — Positive supply voltage (5V) |
| ピン 40 | VSS — Ground |
| ピン 41 | VDD — Positive supply voltage (5V) |
| ピン 42 | VSS — Ground |
| ピン 43 | NC — Not connected (reserved) |
| ピン 44 | NC — Not connected (reserved) |
主な用途
PIC17C42AT-25E/PT の用途: 6 件s: Industrial Process Control, Motor Control and Drive Subsystems, Instrumentation and Measurement, Peripheral Controllers and Embedded Subsystems, Automotive Body and HVAC Electronics, Security and Access Control Panels.
Industrial Process Control
The PIC17C42AT-25E/PT suits industrial process controllers needing more code and I/O than PIC16C provides. Its 4KB OTP holds assembly routines for PID loops, sequencing, and Modbus/async serial while 33 I/O connect to 4-20 mA loops, opto-isolated digital inputs, and relay drivers. The 25 MHz oscillator input drives deterministic 160 ns instructions for tight control loops. Enhanced -40C to +125C temperature range supports cabinet and outdoor installations, and the 44-TQFP package is well suited to conformal-coated PCBs in factory automation environments.
おすすめ
Motor Control and Drive Subsystems
Small to medium DC and stepper motor controllers benefit from the PIC17C42AT-25E/PT's 25 MHz instruction throughput, 33 I/O for H-bridge gate signals and encoder feedback, and integrated CCP modules for PWM generation. The 4KB OTP accommodates trapezoidal profiles, current-sampling routines, and commutation tables. The Enhanced temperature range handles under-hood thermal stress, and the 44-TQFP gives compact board placement near power stages with solid ground returns. Pairing with external gate drivers such as the IR2104 maximizes the MCU's role as a deterministic motion supervisor rather than a high-side driver.
おすすめ
Instrumentation and Measurement
Test and measurement front-ends leverage the PIC17C42AT-25E/PT for 16-bit timer captures, ADC sequencing, and front-panel interfaces. The 33 I/O drive LCD segments, keypads, and relay multiplexers while 232 bytes of RAM hold calibration coefficients and per-channel scratch data. Synchronous serial peripherals interface external ADCs and DACs for low-noise measurements, and 5V supply tolerance suits legacy analog front-ends. The 44-TQFP is pin-compatible with modern PIC18F upgrades when designs convert to Flash during maintenance cycles or new revisions.
おすすめ
Peripheral Controllers and Embedded Subsystems
System designers use the PIC17C42AT-25E/PT as a peripheral controller managing sensors, keypads, displays, and communication bridges inside larger systems. 33 I/O and a 25 MHz core easily handle I2C/SPI/UART glue logic, while 4KB of OTP stores protocol stacks and state machines. The 44-TQFP places the controller next to its connectors without intruding on the main processor board. Enhanced temperature rating supports automotive and industrial enclosures, and the PIC17C toolchain (MPASM, MPLAB ICD) allows simple in-house firmware maintenance.
おすすめ
Automotive Body and HVAC Electronics
Body controllers, HVAC modules, and lighting nodes use the PIC17C42AT-25E/PT for I/O-heavy, deterministic control with moderate firmware complexity. 33 I/O connect to switches, LEDs, and LIN/CAN links, while 4KB of OTP holds state tables and diagnostic service routines. The Enhanced -40C to +125C temperature range tolerates under-dash thermal environments, and the 44-TQFP plus PIC17C heritage suit existing automotive layouts. Migration paths to the Flash-based PIC18F family simplify field firmware updates during service intervals, reducing warranty costs.
おすすめ
Security and Access Control Panels
Access control and alarm panels run on the PIC17C42AT-25E/PT with its 4KB OTP holding credential tables, keypad debounce state machines, and dialer protocol code. 33 I/O drive zone inputs, siren drivers, keypads, and LCDs while the 25 MHz core handles off-hook detection and DTMF generation. Enhanced temperature range supports outdoor junction boxes, and the 44-TQFP keeps board size compact. OTP storage is acceptable because field firmware rarely changes; new SKUs are programmed at build time and traced via unique IDs stored in EEPROM peripherals.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC17C42AT-25E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC17C42AT-25/PT | PIC17C42A-25/PT | PIC17C42A-33I/PT | PIC17C42A-33/PT | PIC17C42A-25E/P | PIC17C42A-16/P |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (PT) | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same | 44-TQFP (PT) - same |
| Program Memory | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP |
| RAM Size | 232 bytes | 232 bytes | 232 bytes | 232 bytes | 232 bytes | 232 bytes | 232 bytes |
| Maximum Clock | 25 MHz | 25 MHz | 25 MHz | 33 MHz | 33 MHz | 25 MHz | 16 MHz |
| Number of I/O | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
| Temperature Range | -40C to +125C (Enhanced) | 0C to +70C (standard) | 0C to +70C (standard) | -40C to +85C (industrial) | 0C to +70C (standard) | -40C to +125C (Enhanced) | 0C to +70C (standard) |
| Core Architecture | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC | PIC17C42A 8-bit RISC |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
主な差別化要因
- Enhanced -40C to +125C operating temperature range versus 0C to +70C standard （vs PIC17C42AT-25/PT)
- Highest commercial-spec speed grade paired with Enhanced temperature range （vs PIC17C42A-33I/PT)
- Legacy 8-bit RISC core with wide I/O, fully obsolete-era but available （vs PIC17C42A-16/P)
設計ノート
PIC17C42AT-25E/PT uses One-Time-Programmable (OTP) memory that cannot be erased after programming. Always use a windowed PIC17C42A CERDIP variant or a Flash-based PIC18F-equivalent for prototypes and firmware development; reserve OTP parts for production runs only. Reprogramming a programmed OTP device destroys the part and requires a new unit. Estimated: based on PIC17C4X family datasheet and Microchip OTP design guidance.
Decouple VDD/VSS pairs as close to the 44-TQFP pins as possible with a 100 nF ceramic in parallel with a 10 uF tantalum or aluminum polymer cap for each supply pin pair. The PIC17C4X core can produce sharp transient currents when multiple output ports switch simultaneously. Place the 100 nF cap within 5 mm of the supply pins and keep traces short and wide to minimize supply inductance.
Route the OSC1/OSC2 crystal traces to within 5 mm of the pins and keep them short and shielded by a grounded guard ring to reduce EMI pickup. Place MCLR/VPP with a 10 kohm pull-up to VDD and a small capacitor (33 pF typical) for noise immunity, especially in electrically noisy environments. The 44-TQFP exposes multiple VDD/VSS pairs that all need low-impedance plane connections to keep digital switching noise below the analog reference pins.
Estimated: at 25 MHz, 5V VDD, and full I/O switching, the PIC17C42AT-25E/PT dissipates approximately 30-50 mA of supply current, producing 150-250 mW of heat. The 44-TQFP package has theta_JA of approximately 50 C/W (typical 4-layer PCB), so junction temperature rise is 7.5-12.5 C above ambient. No heatsink is required for normal operation, but derating I/O drive or operating voltage reduces die stress in enclosed industrial enclosures.
コンプライアンス情報
RoHS compliance was not explicitly stated in the verified web data. Legacy PIC17C4X family typically supplied in leaded packages for industrial/automotive use. AEC-Q100 not qualified - part was not designed for automotive safety applications. Consult Microchip product compliance portal for current environmental certification data.