PIC18F66J93T-I/PT - 8-bit LCD MCU, 64KB Flash, 12-bit ADC | Microchip
部品番号: PIC18F66J93T-I/PT ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.92 | $8.92 |
| 10 | $8.03 | $80.30 |
| 100 | $7.14 | $714.00 |
| 500 | $6.45 | $3,225.00 |
| 1,000 | $5.85 | $5,850.00 |
PIC18F66J93T-I/PT 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals. The PIC18 family uses an enhanced 8-bit RISC architecture with hardware multiply, a 16-bit instruction word, and a vectored interrupt controller. Within the PIC18 hierarchy, the J93 sub-family adds integrated segment-LCD drive, nanoWatt XLP power management, and a 12-bit ADC, positioning it between general-purpose PIC18F and PIC24/dsPIC families.
Key features include 64KB (32K x 16) self-programmable Flash, 3923 bytes SRAM, 51 digital I/O, an internal oscillator, nanoWatt XLP low-power modes, an integrated LCD segment driver, and a 12-bit ADC with 12 input channels. The device operates from 2.0V to 3.6V, supporting battery-powered and portable designs. The 64-pin TQFP (10x10 mm) package offers the most pin-rich option in the family for designs needing extensive GPIO and segmented LCD drive.
The PIC18F66J93 architecture uses a 16-bit-wide instruction path, 31-level hardware stack, and a priority-interrupt controller, with peripheral features including EUSART, I2C, SPI, 10-bit PWM, comparators, and a real-time clock counter. Integrated nanoWatt XLP support enables sleep currents as low as the low-nA range, extending battery life in metering applications.
Typical applications include handheld meters, thermostats, home security panels, portable medical devices, utility metering, and consumer appliances with segmented LCD user interfaces. Design considerations include providing adequate decoupling near VDD/AVDD pins and following Microchip's recommended layout for LCD bias generation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: PIC18F66J93T-I/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC18F66J93T-I/PT （同一形状・フットプリント） — 相違点: Package, ADC, LCD Driver, Operating Temperature, Core.
クイック比較ツール — 並列比較する代替部品を選択:
PIC18F66J93-I/PT
✅ ドロップイン✓ 在庫あり
$5.05 / 個
データシートを見る →PIC18F65J94-I/PT
✅ ドロップイン✓ 在庫あり
$3.89 / 個
データシートを見る →PIC18F66J90T-I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC18F66J50T-I/PT
✅ ドロップイン✓ 在庫あり
$5.1 / 個
データシートを見る →PIC18F67J93-I/PT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.6 / 個
データシートを見る →PIC18F86J93-I/PT
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC18F66J93T-I/PT 最大定格＆電気的特性
| Core Architecture | PIC 8-bit RISC |
| Program Memory (Flash) | 64 KB (32K x 16) |
| RAM | 3923 bytes |
| Maximum CPU Speed | 48 MHz (12 MIPS) |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Number of I/O Pins | 51 |
| ADC | 12-bit, 12 channels |
| LCD Driver | Integrated segment LCD driver |
| Communication Interfaces | EUSART, I2C, SPI |
| パッケージ | 64-pin TQFP (PT), 10x10 mm |
| 動作温度 | -40C to +85C (Industrial, 'I') |
| 実装タイプ | Surface Mount |
| MSLレベル | 3 (168 hours) |
| Oscillator | Internal |
| Power-Saving Modes | nanoWatt XLP |
| RoHS ステータス | Compliant |
PIC18F66J93T-I/PT ピン構成
| ピン 1 | RC2 — Digital I/O / PWM output |
| ピン 2 | RC3 — Digital I/O / SPI clock |
| ピン 3 | RC4 — Digital I/O |
| ピン 4 | RC5 — Digital I/O |
| ピン 5 | VSS — Ground |
| ピン 6 | RC6 — Digital I/O / EUSART TX |
| ピン 7 | RC7 — Digital I/O / EUSART RX |
| ピン 8 | RD0 — Digital I/O |
| ピン 9 | RD1 — Digital I/O |
| ピン 10 | RD2 — Digital I/O |
| ピン 11 | RD3 — Digital I/O |
| ピン 12 | RD4 — Digital I/O |
| ピン 13 | RD5 — Digital I/O |
| ピン 14 | RD6 — Digital I/O |
| ピン 15 | RD7 — Digital I/O |
| ピン 16 | VSS — Ground |
| ピン 17 | VDD — Positive supply voltage |
| ピン 18 | RE0 — Digital I/O / LCD segment |
| ピン 19 | RE1 — Digital I/O / LCD segment |
| ピン 20 | RE2 — Digital I/O / LCD segment |
| ピン 21 | RE3 — Digital I/O |
| ピン 22 | RE4 — Digital I/O |
| ピン 23 | RE5 — Digital I/O |
| ピン 24 | RE6 — Digital I/O |
| ピン 25 | RE7 — Digital I/O |
| ピン 26 | AVDD — Analog positive supply |
| ピン 27 | AVSS — Analog ground |
| ピン 28 | RA0 — Digital I/O / ADC input |
| ピン 29 | RA1 — Digital I/O / ADC input |
| ピン 30 | RA2 — Digital I/O / ADC input |
| ピン 31 | RA3 — Digital I/O / ADC reference |
| ピン 32 | RA4 — Digital I/O |
| ピン 33 | RA5 — Digital I/O / ADC input |
| ピン 34 | VDD — Positive supply voltage |
| ピン 35 | VSS — Ground |
| ピン 36 | RB0 — Digital I/O / interrupt |
| ピン 37 | RB1 — Digital I/O / interrupt |
| ピン 38 | RB2 — Digital I/O / interrupt |
| ピン 39 | RB3 — Digital I/O / interrupt |
| ピン 40 | RB4 — Digital I/O / interrupt |
| ピン 41 | RB5 — Digital I/O / interrupt |
| ピン 42 | RB6 — Digital I/O / interrupt / ICSPCLK |
| ピン 43 | RB7 — Digital I/O / interrupt / ICSPDAT |
| ピン 44 | RF0 — Digital I/O / LCD segment |
| ピン 45 | RF1 — Digital I/O / LCD segment |
| ピン 46 | RF2 — Digital I/O / LCD segment |
| ピン 47 | RF3 — Digital I/O / LCD segment |
| ピン 48 | RF4 — Digital I/O / LCD segment |
| ピン 49 | RF5 — Digital I/O / LCD segment |
| ピン 50 | RF6 — Digital I/O / LCD segment |
| ピン 51 | RF7 — Digital I/O / LCD segment |
| ピン 52 | RG0 — Digital I/O / LCD segment |
| ピン 53 | RG1 — Digital I/O / LCD segment |
| ピン 54 | RG2 — Digital I/O / LCD segment |
| ピン 55 | RG3 — Digital I/O / LCD segment |
| ピン 56 | RG4 — Digital I/O / LCD segment |
| ピン 57 | MCLR — Master clear reset (active-low) |
| ピン 58 | OSC1 — Oscillator input |
| ピン 59 | OSC2 — Oscillator output |
| ピン 60 | RA6 — Digital I/O / oscillator |
| ピン 61 | RA7 — Digital I/O / oscillator |
| ピン 62 | VDD — Positive supply voltage |
| ピン 63 | VSS — Ground |
| ピン 64 | RC0 — Digital I/O / LCD segment |
主な用途
PIC18F66J93T-I/PT の用途: 7 件s: Handheld Digital Multimeter, Programmable Thermostat, Home Security Control Panel, Portable Medical Device (Blood Pressure Monitor), Utility Metering (Electricity/Water/Gas), Industrial Process Indicator, Consumer Appliance User Interface.
Handheld Digital Multimeter
The PIC18F66J93T-I/PT is well suited to handheld digital multimeters thanks to its integrated 12-bit ADC with 12 input channels and segment LCD driver. The 12-bit resolution provides 4096 counts, sufficient for basic 4000-count DMM display accuracy, while the segment LCD directly drives numeric readouts without an external controller. NanoWatt XLP modes drop sleep current into the nA range, extending battery life in standby. Designers place the MCU between the analog signal-conditioning front end and the LCD, using internal op-amps (if configured) or external amplifiers for input scaling. The 64KB Flash accommodates calibration tables, auto-ranging state machines, and USB serial bridges for data logging.
おすすめ
Programmable Thermostat
The PIC18F66J93T-I/PT fits programmable thermostat designs through its combination of 12-bit ADC for temperature sensing, segment LCD driver for the display, and nanoWatt XLP power management for 24/7 mains-backed or battery operation. The 12 ADC channels accept multiple NTC thermistor inputs (room, floor, outdoor) plus humidity sensor outputs. Real-time-clock counter tracks schedule programs. EUSART/I2C/SPI interfaces connect to Wi-Fi modules (e.g., ESP32 co-processor) for smart-thermostat variants. The wide 2.0-3.6V VDD range permits direct 2x AA battery or 24VAC-derived 3.3V supply rails. Internal oscillator eliminates external crystal, reducing BOM cost.
おすすめ
Home Security Control Panel
The PIC18F66J93T-I/PT serves home security control panels by combining 51 digital I/O for sensor loops, 12-bit ADC for battery and line-voltage monitoring, and segment LCD for the keypad/display interface. The 64KB Flash stores event logs, user codes, and communication protocol stacks (Contact ID, SIA). EUSART interfaces to GSM/PSTN dialers; SPI connects to Ethernet or Wi-Fi modules. nanoWatt XLP modes keep quiescent draw minimal during AC-mains power-loss standby operation from backup batteries. The 64-pin TQFP footprint provides sufficient GPIO for multi-zone alarm panels with both wired sensors and wireless receiver interfaces.
おすすめ
Portable Medical Device (Blood Pressure Monitor)
The PIC18F66J93T-I/PT supports portable medical devices such as blood pressure monitors, glucose meters, and pulse oximeters through its 12-bit ADC for sensor signal acquisition, segment LCD for direct numeric display, and nanoWatt XLP modes for battery longevity. The 12 ADC channels handle cuff pressure transducer, motor current sense, battery voltage, and user-button matrix. SRAM (3923 bytes) buffers measurement samples and trend history. SPI/I2C interfaces connect to optional Bluetooth modules for smartphone connectivity. The industrial -40C to +85C temperature range and 2.0-3.6V VDD permit operation from 2x AAA alkaline cells across a wide range of clinical and home environments.
おすすめ
Utility Metering (Electricity/Water/Gas)
The PIC18F66J93T-I/PT is well matched to utility metering endpoints with its integrated segment LCD, 12-bit ADC for measurement front ends, and nanoWatt XLP modes that achieve sub-uA sleep currents critical for 10+ year battery life on water and gas meters. The 12 ADC channels sample current shunts, voltage dividers, or pulse-output flow sensors. EUSART and I2C connect to wireless MBus, LoRa, or cellular modules for AMI/AMR backhaul. Internal EEPROM emulation in Flash stores tamper logs, calibration constants, and monthly consumption history. The wide operating temperature range supports outdoor meter installations. Many Microchip reference designs target this family for residential smart meters.
おすすめ
Industrial Process Indicator
The PIC18F66J93T-I/PT works in industrial process indicators as a 4-20 mA loop-powered display or local HMI for temperature, pressure, level, or flow sensors. The 12-bit ADC digitizes 4-20 mA inputs via burden resistor; segment LCD shows engineering units. EUSART or SPI interfaces to external Modbus RTU transceivers. The wide 2.0-3.6V supply permits operation directly from 4-20 mA loop with proper shunt regulation. nanoWatt XLP reduces power budget to fit within the 3.6 mA loop current limit. 51 digital I/O handle alarm relays, pushbutton inputs, and backlight control. The -40C to +85C industrial temperature range handles factory floor environments.
おすすめ
Consumer Appliance User Interface
The PIC18F66J93T-I/PT fits consumer appliance user interfaces such as washing machines, ovens, and rice cookers with segment LCD displays and pushbutton controls. The segment LCD driver replaces traditional 7-segment discrete LED modules, reducing BOM cost and PCB area. 12 ADC channels monitor NTC temperature probes, water-level sensors, and motor current. The 64KB Flash supports multi-language UI strings, fuzzy-logic cooking profiles, and Inverter/motor-control state machines. EUSART interfaces to motor-driver boards or inverter modules. The 2.0-3.6V supply accepts 3.3V regulated rails from AC-DC converters.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC18F66J93T-I/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC18F66J93-I/PT | PIC18F65J94-I/PT | PIC18F66J90T-I/PT | PIC18F66J50T-I/PT | PIC18F67J93-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT) 10x10 mm | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same | 64-pin TQFP (PT) - same |
| Core | 8-bit PIC18 (RISC) | 8-bit PIC18 (RISC) | 8-bit PIC18 (RISC) | 8-bit PIC18 (RISC) | 8-bit PIC18 (RISC) | 8-bit PIC18 (RISC) |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 10-bit | 12-bit |
| ADC Channels | 12 | 12 | 12 | 12 | 8 | 12 |
| LCD Driver | Yes (integrated segment LCD) | Yes | Yes | Yes | Yes | Yes |
| Max CPU Speed | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) | 48 MHz (12 MIPS) |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
主な差別化要因
- Integrated segment LCD driver （vs PIC18F66J50T-I/PT)
- Industrial temperature grade （vs PIC18F6620T-I/PT)
- 64-pin TQFP with 51 I/O （vs PIC18F65K90T-I/MR (QFN-64))
設計ノート
Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pin pair, with a bulk 10 uF tantalum or ceramic capacitor near the package. For battery-powered metering designs, use nanoWatt XLP sleep modes and switch the ADC off between conversions to minimize quiescent current. The internal voltage regulator requires a low-ESR capacitor on its dedicated pin per the datasheet.
Route the analog AVSS trace directly to a clean ground point at the system star-ground; avoid sharing AVSS return current with noisy digital ground paths. Place the analog signal traces away from PWM outputs and switching nodes. The 64-pin TQFP allows a generous ground plane beneath the device, which improves ADC SNR by several dB per Microchip application notes.
Ensure the MCLR pin has a 10 kohm pull-up to VDD; floating MCLR can cause unpredictable resets. When using the internal oscillator, configure OSCTUNE and OSCCON correctly to avoid drift at temperature extremes. The ICD/ICSP pins (RB6/RB7) must be left free in production designs unless in-circuit debugging is required, with appropriate isolation resistors to prevent debug-circuit interference.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. Industrial temperature grade only; not AEC-Q100 qualified for automotive use. Microchip recommends PIC18F66J93T-I/PT for handheld meters, thermostats, home security, and portable medical devices per the official product family description.
